Cabletron Systems 6A000-ZX-250 User Manual
Size:
1.27 Mb
Download

Boot Load Commands

go

Use the go command to exit the boot load prompt and run switch software (with or without POST).

Parameter

Explanation

 

 

s

Bypass POST and go directly to switch software.

p

Run POST, and then run switch software.

none

Same as s; bypass POST and go directly to switch software.

Example

=>go s

Verifying Checksum of Secondary Flash...

Host Name:

Attaching network interface ei0... done. Attaching network interface lo0... done. 0xe05764e0 (tRootTask): flashFsLib: Initialized Initializing Flash File-System

Initializing System

Initializing Hardware

Initializing Alarms, Logging and Tracing

Initializing Signalling (please wait)

Initializing ILMI

Initializing LANE Servers

NOTICE - 'ZLESSRV' ***** LES started *****

Initializing LANE & IP/ATM Client

Initializing Watchdog Timer

SmartCell ZX Command Console

SmartCell ZX Version 1.2 (c) Cabletron Systems Inc. password:

SmartCell 6A000/ZX-250Reference Manual3-7