Bushnell 360310 User Manual
RECORD YOUR TRACK FIND YOUR WAY BACK
TABLE OF CONTENTS
Control & Display Guide
111. POWER Button
123. TRIP Button
2 4. SETUP Button
Location Icon (1 of 5)
57. Local Time
8. Direction to Location
99. Distance to Location
10.Battery Level Indicator
11.Satellite Lock Icon
SIDE & BACK VIEWS
Note: Serial # is
•Open battery cover and insert 3 AAA batteries (Fig 1, pg 4). Record the serial #
•Go outdoors. HOLD POWER (1) (keep the button pressed) until the display comes on. Wait for GPS satellite lock (icon stops blinking) (11). This may take a few minutes after the first
•Press SETUP (4). PressMARK (2), then press theTRIP (3) orSETUP button to set the Hour for your area
•Press MARK to return to the Setup screen. To set clock, distance or temperature units (change to 24 hr, meters, C) pressSETUP to select, then pressMARK to toggle between settings(Fig. 3). PressPOWER to exit Setup screen.
MARKING/RETURNING to a LOCATION
•Press POWER to select one of five Location icons (6) (Home, Car, Star, Flag, Target). While standing at the Location you want to mark, HOLDMARK to save its position in the
•To return to the location you marked, turn the
MARKING/RETURNING to a LOCATION (cont.)
•You can use the five icons to mark five different locations of any kind (your car, tent, scenic area, etc.). Be sure you select a different icon to store each new location. If you hold down MARK with a previously used location icon still selected, you will replace that one with your current location.
•Press POWER once again after the “Target” location icon screen to view the temperature and altitude at your current location(Fig. 6).
•Press POWER again to view the Compass screen, displaying the Latitude and Longitude of your current location, and a digital compass display including your heading (direction of travel) in degrees(Fig. 7).
AUTO POWER OFF/BACKLIGHT
•Power automatically turns off after 10 minutes if no buttons have been pressed (except in Trip mode, described next). HOLD POWER to turn the unit off manually.
•Press the MARK button to turn the display backlight on. It automatically turns off after 30 seconds.
•To ensure directional accuracy, hold the
•For best results, we recommend holding the
RECORDING A NEW TRIP (ROUTE)
•Press TRIP (3) to enter Trip mode. HOLD theTRIP button to start recording new trip data. The display shows a moving “hiker” icon, along with updated readouts of elapsed distance and average speed during your trip(Fig. 10). Keep the
•To stop recording the trip data, HOLD the TRIP button again.
•Press the TRIP button to view the distance and averagespeedofyourlasttrip,alongwitharemaining memory indicator (% of trip data memory used)(Fig. 11). The
VIEWING TRIP DATA
After recording at least one trip, connecting the
•Go to http://backtrackdtour.com/ and follow the directions to create an account (free) and register your
(Fig. 14) (Adobe Air® is
VIEWING TRIP DATA (cont.)
computer). Click “Download Now”, then select “Open”. A link to download the software will also be provided in your confirmation email. Turn on the
•Enter the User Name (email address) and Password you used when setting up your account, then select “LOGIN” (Fig. 16). This will enable all your trip data to be stored within your online account, so it will be automatically backed up, and accessible to you from any computer.
•Click the folder to open it and view the individual trips (b) you made on that date (the duration of each trip is based on the time elapsed between the starting and stopping of a new trip recording when you held down theTRIP button).
•The route you traveled for each trip is shown as a colored line (c) on a map. Four types of maps are
•The zoom slider and position arrow pad allow you to zoom in/out and move around on the map (e).
•Click on the name of a trip to highlight it on the map.You can hide any trip by clicking on the“eye”icon next to it’s name (f).
•To change the name of a folder (from the default date to something like “Canyon Trip Day 1”), right click on its name. You can also right click on a trip within the folder to rename it.
•Clicking on the“handle”(g) at the bottom center of the map screen will open a popup graph displaying the altitude, temperature and speed data from the trip. You can use the
•To create a new folder, click the plus (+) icon on the bottom left (i). Existing trips can be dragged from their original folder into the new one.
•To delete a trip or trips folder, drag it to the trash icon (j).
•If you’d like to share the details of your trips, we’ve made it easy. Just click “Export Current Map”(k) and select a save or share option.
•The“Save As”option allows you export the current map view as a .jpg photo.
•When you have finished using the
If you want to access your
If you log out of the