Bushnell 119447 User Manual
I N S T R U C T I O N M A N U A L
Model#s: 119437 / 119447 / 119476 / 119477
Rejoignez la communauté Trophy Cam sur www.trophycam.fr pour :
Partager vos expériences, vos conseils et astuces avec les autres utilisateurs de la
• Accéder à un service internet gratuit pour gérer et publier les photos et vidéos prises avec
• Comenta tus experiencias Trophy Cam con otros usuarios, forma parte de esta nueva
• Accede a un servicio gratuito para gestionar tus fotos y videos
Besuchen Sie noch heute die deutsche Throphy Cam Community Internetseite, dort:
• haben Sie Zugriff auf einen freien Service, um Ihre TrophyCam Bilder/Videos online zu
Visita oggi la Trophy Cam Communty del tuo paese, e se possibile:
TABLE OF CONTENTS
Visit the Trophy Cam community website for your country today, where you can:
•discuss your Trophy Cam experiences with other users, share tips, belong to this new worldwidecommunity
Congratulations on your purchase of one of the best trail cameras on the market! Bushnell is very proud of this little unit and we are sure you will be pleased with it as well. We appreciate your business and want to earn your trust. Please refer to the notes below and the instructions in this manual to ensure that you are completely satisfied with this product.
If your Bushnell Trophy Cam does not seem to be functioning properly or if you are having photo/video quality issues, please check the Troubleshooting/FAQ section on pages
Problems are often due to something simple that was overlooked, or require only changing one setting to solve.
If your problem continues after trying the solutions in the Troubleshooting/FAQ section, please call Bushnell Customer Service at (800)
Bushnell recommends using a full set of Energizer® Lithium AA batteries (8 or 12, depending on the model) in these Trophy Cam models to obtain maximum battery life
Do not mix old and new batteries
Do not mix battery
Bushnell recommends using SanDisk® SD and SDHC Cards (up to 32GB capacity, Ultra® or Extreme® series for HD video) in these Trophy Cam models
About the Trophy Cam
The Bushnell Trophy Cam is a digital scouting camera. It can be triggered by any movement of game in a location, detected by a highly sensitive Passive
The Trophy Cam consumes very little power (less than 0.2 mA) in a standby (surveillance) state. This means it can deliver up to six months standby operation time when the device is powered by the full capacity of AA alkaline batteries, and up to twelve months utilizing lithium AA batteries. Once motion in the monitored area is detected, the digital camera unit will be triggered at once (typically within one second) and then automatically take photos or videos according to previously programmed settings. TheTrophy Cam is equipped with
Your trail camera is one of the latest generation of Bushnell Trophy Cams, and includes many new or improved features, including:
•Field Scan 2x with Live
enabled software to automatically show a map pinpointing each camera’s location when a group of photos are reviewed on a computer. Especially useful for those who setup multiple Trophy Cams to monitor large or widely separated areas.
•Multi Flash Mode (LED Control)- prevents overexposed flash photos in close range applications
And many more features such as HD Video with Audio, widescreen or fullscreen format still photos, imprintable camera name (user set) along with current data including temperature, moon phase and barometric pressure* (*imprinted barometer data only available on black LED models).
The Trophy Cam can be used as a trail camera for hunting or scouting game. It is also suitable for surveillance usage.
PARTS AND CONTROLS
The Trophy Cam provides the following connections for external devices: USB port, SD card slot, A/V Out, and external DC power in (pg 7, Fig. 1).
A control key interface with six keys is primarily used in SETUP mode to select operational functions and parameters. As shown on the next page, these keys are: UP, DOWN, LEFT, RIGHT, OK and MENU. Four of the keys can also perform a second function (shortcut operations in SETUP mode) in addition to their main function: The DOWN key can be used to set the camera to Photo mode (still camera icon), and the UP key can set the camera to Video mode (movie camera icon). The RIGHT key also serves as the manual shutter (“SHOT”) button of the camera and the OK key switches the camera to the Playback (“REPLAY”) mode. These secondary functions are indicated by icons or text above the key as shown on the next page.
LED IR Flash
Fig. 1: Connections
A/V Out Video Mic USB Port
DC In SD Card Slot
Cable to Battery
Fig. 2: Button and
INSTALLING THE BATTERIES AND SD CARD
Before you begin learning how to use your Trophy Cam, you will first need to install a set of batteries and insert an SD card. Although that may only take you a minute, there are some important notes about both batteries and SD cards you should be aware of, so please take the time to read the following directions and cautions:
After opening the two latches on the right side of the Trophy Cam, you will see that the Trophy Cam has eight or twelve battery slots, depending on your model. For maximum battery life, you should install a full set of batteries. TheTrophy Cam may also be operated by just four batteries installed in the first slots only (starting on the top or
Bushnell recommends using a full set of new lithium AA (Energizer® brand) or alkaline AA batteries. NiMh Rechargeable batteries are not recommended, as the lower voltage they produce can cause operational issues.It is also possible to use a
Using an External Power Source (optional, user provided)
Optionally, you can connect an external 6V DC power source to the “DC In” jack at the bottom of the Trophy Cam. It is recommended to use a power source with a current output greater than 1550mA. However, during bright daytime operation when no flash is required, theTrophy Cam can function with much less current ( >400mA). Please use a compatible power source cable(not provided) to connect the external DC power source with the power input jack of theTrophy Cam, making sure that the polarity is correct.Note: The power connector is a 4.0x1.7mm coaxial DC power plug with positive “tip” (inside pin) polarity (Radio Shack P/N
If both an external power source is connected and batteries are installed, the Trophy Cam will be powered by the external power source.
When the batteries become weak, the
Inserting the SD Card
The Trophy Cam has 32MB of internal memory, which can hold only about 20 photos (@ 5MP resolution). This is handy for testing and getting familiar with the camera, but you will no doubt want to leave the camera unattended for longer than a day, so using an SD card is recommended for all models. Insert the SD card (with the camera’s power switch in theOFF position) before beginning to operate the camera. Don’t insert or remove the SD card when the power switch is in theON position.
The Trophy Cam uses a standard SD (Secure Digital) memory card to save photos (in .jpg format) and/or videos (in .avi format). SD and SDHC (High Capacity) cards up to a maximum 32GB capacity are supported. High speed SD cards are recommended if you will use the 1280x720 video resolution setting (HD). Before inserting the SD card into the card slot after opening the camera’s front cover, please make sure that the
•Insert the SD card into the card slot with its label side upwards (see below). A “click” sound indicates that the card is installed successfully. If the wrong side of the card is facing up, you will not be able to insert it without
•To take out the SD card, just gently push in the card (do not try to pull it out without pushing in first). The card is released from the slot and ready to be removed when you hear the click.
WARNING: Be sure the camera’s power is switched OFF before inserting or removing SD cards or batteries.
USING THE TROPHY CAM
Once you’ve prepared your Trophy Cam by properly installing batteries and an SD card, you could simply take it outside, strap it to a tree, switch it on and
THE OFF, ON, AND SETUP MODES
The Trophy Cam has three basic operational modes:
•OFF mode: Power switch in theOFF position.
•ON mode: Power switch in theON position (LCD screen is off.)
•SETUP mode: Power switch atSETUP position (LCD screen is on).
The OFF mode is the “safe” mode when any actions must be taken, e.g., replacing the SD card or batteries, or transporting the device. You will also useOFF mode if you connect the camera to a computer’s USB port later to download your photos/videos. And of course, when you are storing or not using the camera, you will switch it toOFF. Please note that even in theOFF mode theTrophy Cam still consumes power at a very low level. Therefore, it’s a good idea to take the batteries out of the battery compartment if the
camera will not be used for a long time.
Anytime after the batteries and SD card have been inserted, you can switch on the camera. When the power switch is moved to the top position, the camera will enter into the ON (Live) mode. The motion indicator LED (pg. 6, “Front View”) will blink red for about 10 seconds. This interval allows time for you to close theTrophy Cam’s front cover, lock it, and leave the monitored area. Once in theON mode, no manual controls are needed or possible (the control keys have no effect). TheTrophy Cam will take photos or