Bush Hog® TOUGH
121&176 Rear Mounted Blades
Bush Hog® TOUGH Features
TOUGH Heavy Duty Reinforced Moldboard
TOUGH Reinforced High Strength Hitch TOUGH Heavy Duty King Pin
TOUGH Heavy Duty Mainframe
TOUGH Double Strap Hitch
TOUGH Powder Coat Paint
176 Series Blade
121 Series Blade
|
Models |
|
121 |
176 |
|
Moldboard Widths |
8 and 9 ft |
9 and 10 ft |
|
|
|
|
|
|
|
Approximate Weight |
885 lbs (8 ft), 910 lbs (9 ft) |
1381 lbs (9 ft), 1408 lbs (10 ft) |
|
|
|
|
|
|
|
Maximum Tractor HP |
120 PTO (2WD); 95 PTO (4WD) |
175 PTO (2WD); 140 PTO (4WD) |
|
|
|
|
|
|
|
Type Hitch |
3 Point Category II or III or Quick Hitch |
3 Point Category II or III or Quick Hitch |
|
|
|
|
|
|
|
Moldboard Height and Thickness |
20 inches x 1/4 inches |
20 inches x 3/8 inches |
|
|
|
|
|
|
|
Moldboard Cutting Edge |
1/2 x 6 inches, Reversible |
1/2 x 6 inches, Reversible |
|
|
|
|
|
|
|
King Pin Diameter |
4 inches |
5 inches |
|
|
|
|
|
|
|
Tilt Adjustment |
15° Up and Down |
15° Up and Down |
|
|
|
|
|
|
|
Offset Adjustment |
35 inches left or right |
35 inches left or right |
|
|
|
|
|
|
|
Angle Adjustment |
45° left or right |
45° left or right |
|
|
|
|
|
|
|
Blade Parking Stand |
Standard |
Standard |
|
|
|
|
||
|
Options |
End Plates, Manual or Hydraulic Gauge Wheel, Cushion Valve Kit, Skid Shoes on 121 |
||
|
|
|
|
|
|
Warranty |
1 year limited warranty |
|
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE