Bush Hog 3210 User Manual

Bush Hog® TOUGH
3210Series Rotary Cutters
| Bush Hog® TOUGH Features |
|
| |||
| TOUGH 10 Gauge Deck Construction |
|
| |||
| TOUGH 7 Gauge Strongbacks |
|
|
| ||
| TOUGH 1/4 Inch Sidebands |
|
|
| ||
| TOUGH Rubber Cushioned Axle Arms |
|
| |||
| TOUGH 5 Year Gearbox Limited Warranty | Model 3210 |
| |||
| TOUGH Powder Coat Paint |
|
| |||
|
|
|
| |||
|
| 3210 | 3210 Offset |
| ||
| Models |
|
| |||
Cutting Width | 101/2 ft | 101/2 ft |
| |||
|
|
|
|
| ||
Cutting Capacity | 2 1/2 inch diameter | 2 1/2 inch diameter |
| |||
|
|
|
|
| ||
Offset Beyond Tractor Center Line | N/A | 7 ft 10 inches |
| |||
(Offset Models Only) |
|
|
| |||
|
|
|
|
| ||
Dimensions (width x length) | 11 ft 1 inch x 9 ft 10 inches (Lift) | 11 ft 1 inch x 13 ft 5 inches (Pull) |
| |||
|
|
|
| |||
Transport Width | 10 ft 11 inches | 10 ft 11 inches |
| |||
|
|
|
| |||
Type Hitch | 3 Point Category II & III Standard and | 3 Point Category II & III |
| |||
|
|
|
| Quick Hitch, Cat. II & III | and Pull Type (self leveling) |
|
|
|
|
| and Center Pull (self leveling) |
|
|
|
|
|
|
| ||
Cutting Height | 2 to 13 inches | 2 to 13 inches |
| |||
|
|
|
| |||
Deck Thickness | 10 gauge | 10 gauge |
| |||
|
|
|
|
| ||
Side Bands | 1/4 x 10 inches | 1/4 x 10 inches |
| |||
|
|
|
|
| ||
Minimum Tractor HP | 60 PTO (Lift), 50 PTO (Pull) | 55 PTO |
| |||
|
|
|
|
| ||
Driveline | ASAE Cat. 5 (540 RPM - Lift, Pull and | ASAE Cat. 5 (540 RPM - Pull and |
| |||
|
|
|
|
|
| |
|
|
|
| |||
Cross Shaft | ASAE Cat. 5 Rubber Element | ASAE Cat. 5 Rubber Element |
| |||
|
|
|
| |||
Gearbox HP | (3) 205 Center, 190 Outboard | (2) 205 Main, 190 Outboard |
| |||
|
|
|
| |||
Tractor PTO Speed | 540/1000 RPM | 540 RPM |
| |||
|
|
|
| |||
Driveline Protection | 4 Plate PTO Slip Clutch | 4 Plate PTO Slip Clutch |
| |||
|
|
|
| |||
Height Adjustment | Manual or hydraulic | Manual or hydraulic |
| |||
|
|
|
| |||
Blade Holder(s) | Round | Round |
| |||
|
|
|
|
| ||
Blades | 1/2 x 4 inches - Uplift | 1/2 x 4 inches - Uplift |
| |||
|
|
|
| |||
Blade Tip Speed | 16,881 FPM/540 RPM; 17,400/1000 RPM | 16,881 FPM/540 RPM; 17,400/1000 RPM |
| |||
|
|
|
| |||
Tires | Laminated, Pneumatic, Aircraft | Laminated, Pneumatic, Aircraft |
| |||
|
|
| ||||
Axles | Rubber Cushioned, Choice of Single or Dual Axles for Pull Models |
| ||||
|
|
|
| |||
Deflectors | Front Belting, Rear Band, Optional Chains | Front Belting, Rear Band, Optional Chains |
| |||
|
|
|
| |||
Safety Tow Chain | Standard for Pull Models | Standard for Pull Models |
| |||
|
|
|
| |||
Approximate Weight (Pull with Single Axle) | 2741 lbs | 2624 lbs |
| |||
|
|
| ||||
Options | Chain Shielding, Third Tailwheel for Lift or |
| ||||
|
|
| ||||
Warranty | 1 year limited warranty with a 5 year gearbox limited warranty |
| ||||
|
|
| • High blade tip speeds • Deep sidebands |
| ||
| FEATURES |
|
|
| ||
|
|
|
|
|
|
|
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE | Page 24 |