Buffalo Technology DriveStation HD-HSIU2 User Manual

Size:
1.56 Mb
Download

HD-HSIU2

DriveStation HD-HSIU2Series

QUICK SETUP GUIDE

www.buffalo-technology.com

EN

DriveStation HD-HSIU2Series

Package Contents

Thank you for purchasing a Bu alo DriveStation.

Package contents include:

DriveStation

USB 2.0 Cable

FireWire (IEEE1394) Cable

Quick Setup Guide

Setup CD-ROM

Warranty Statement

Introduction

The Bu alo TurboUSB utility can greatly improve the data transfer rates to and from your Bu alo USB hard drive. The utility cannot be used with other USB devices.

Installation

1

Insert your DriveNavigator CD in your computer’s CD drive.

To setup your DriveStation, click on the DriveStation Setup Wizard and follow the instructions. (Fig: 1)

To install TurboUSB on your computer, Click on TurboUSB Utility button. Follow the wizard to complete the installation.

Fig: 1

1

EN

Using TurboUSB

2

To use TurboUSB, you must first enable it. From theStart menu, choose

Programs > BUFFALO > TurboUSB > TurboUSB for HD-HSIU2. (Fig: 2)

Fig: 2

Click Enable and follow the instructions. (Fig: 3)

Fig: 3

Once the wizard has completed you must disconnect the DriveStation by clicking on the ‘Safely Remove Hardware’ icon in the systray (located in the taskbar) (Fig: 5). Once indicated, remove and reattach the USB cable from your PC to finalise activation of TurboUSB.

2

EN

Using TurboUSB

2

Fig: 4

Fig: 5

You may also turn TurboUSB o from the same window by clicking Disable and following the steps (Fig: 3). You must then unplug and reconnect the USB hard drive to finalise the process. Use the ‘Safely Remove Hardware’ wizard to release the drive before unplugging it.

3

EN

Is TurboUSB enabled?

3

To check whether TurboUSB is enabled, right-clickonMy Computer and chooseProperties > Hardware > Device Manager > Universal Serial Bus controllers. If TurboUSB is enabled, your USB storage device will have “(TurboUSB)” added to its name. (Fig: 6)

Fig: 6

Uninstalling

4

To remove the Bu alo TurboUSB utility from your computer, click Start >

Programs > BUFFALO> TurboUSB> Uninstaller. This will launch an uninstall screen. Click on Startto run the uninstallation. (Fig: 7)

Fig: 7

4

EN

TurboUSB For Mac

The Bu alo TurboUSB utility can greatly improve the data transfer rates to and from your Bu alo USB hard drive. Other USB devices are not a ected by TurboUSB software.

Installation and Using TurboUSB

 

1

1. Insert the Bu alo Technology CD in your computer CD drive

 

 

2. Double-clickonTurboUSB.dmg.

 

 

3. Navigate to the “TurboUSB” directory on the Desktop and

 

 

double-clickon TurboUSBHDDInstall.

 

 

4. After the Bu alo TurboUSB software is installed, click Restart.*

 

 

* You must restart your Mac.

 

 

 

 

2

Is TurboUSB enabled?

 

 

If TurboUSB is enabled, the icon of your USB storage device will look as

 

 

indicated.

 

 

 

 

 

Technical Specifications

 

 

 

 

 

 

 

 

 

 

USB Standards:

 

USB Specification Rev. 2.0

Seek Time:

Max. 11 milliseconds

 

 

 

 

 

 

 

 

 

Transmission Speed:

 

Max. 480 Mbps

Power Consumption:

Max. 25W, Average 17W

 

 

 

 

 

 

 

 

 

 

 

 

Power Supply:

 

 

 

 

 

 

 

AC100-240V50/60Hz

Dimensions:

1.77” (W) x 7.86” (H) x 6.41” (D)

 

 

 

 

 

 

 

 

/ 45(W) x 200(H) x 163(D) mm

 

 

 

 

 

 

 

 

 

 

 

 

 

Weight:

 

 

 

 

2.8 lb. / 1.5 kg

 

 

 

Operating Environment:

5 - 35 degree C / 41 - 95 degree F

 

 

 

 

 

 

 

 

20-80%humidity(non-condensing)

5

EN

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CE Mark Warning

This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

Environmental Information

The equipment that you have purchased has required the extraction and use of natural resources for its production.

The equipment may contain hazardous substances that could impact health and the environment.

In order to avoid the dissemination of those substances in our environment and to diminish the pressure on the natural resources, we encourage you to use the appropriate take-backsystems.

The take-backsystems will reuse or recycle most of the materials of your end life equipment in a sound way.

The crossed-outwheeled bin symbol invites you to use those systems.

If you need more information on the collection, reuse and recycling systems, please contact your local or regional waste administration.

Technical Support

USA/Canada:

 

 

Helpdesk Hours

24 hours a day, 7 days a week

Phone

866-752-6210toll-free

Email

info@buffalotech.com

Europe:

 

 

Helpdesk Hours

Monday-Thursday

9:00 AM - 6:00 PM

 

Friday

9:00 AM - 4:30 PM

Phone

+353 61 70 80 50

 

Phone (UK only)

08712 50 12 60

 

Email

helpdesk@buffalo-technology.ie