Buffalo Technology AirStation G54 WLI2-CB-G54L User Manual

Size:
2.31 Mb
Download

User Manual

Wireless 54Mbps Notebook Adapter WLI2-CB-G54L

PY00-30042-DM20-01

Installation / Setup

802.11g Wireless 54Mbps Notebook Adapter

1.Installing the Wireless 54Mbps Notebook Adapter Drivers:

Insert the AirNavigator CDinto the CD-ROM drive of the PC. The Air Navigator Setup Wizard launches automatically. If the Air Navigator Setup Wizard does not launch automatically, launch the wizard manually by selecting Start>>Runto open the Run dialog box. Enter D:\Setup.exein the Open field. D: represents the letter assigned to the CD-ROM drive. If another letter is assigned to the CD-ROM drive, your command should refelect that difference. Click the OKbutton to launch the wizard.

2

Installation / Setup

Select Install Wireless Adapter. Click the OKbutton to begin the installation process.

Click Next to coutinue the process.

Review the Software License Agreement. Click the Yes button to confirm your agreement with the terms and continue installing the Wireless PCI Adapter drivers. Click theNo button to abort the installation process.

3

Installation / Setup

2. Installing the Wireless 54Mbps Notebook Adapter:

Windows XP

Firmly insert the Wireless Notebook Adapter into an available CardBus slot. CardBus slots are located on one side of the notebook. Please consult the Notebook Manufacturer's documentation for CardBus installation instructions.

If the Found New Hardware Wizard launchs, please see Page 5.

When the Wireless 54Mbps Notebook Adapter is successfully installed, click the Finish button.Restart your PC if prompted and skip to Page 10.

4

Installation / Setup

If the Found New Hardware Wizardlaunchs, select Install the software automaticallyand click the Nextbutton.

If multiple drivers are listed, select the most recent driver version and Click the Next button.

If the Hardware Installation window opens, stating that your driver does not pass Windows Logo testing, click the

Continue Anyway button.

When the Wireless 54Mbps Notebook Adapter is successfully installed, click the Finish button.Restart your PC if prompted.

5

Installation / Setup

Windows 98SE/ME/2000

Firmly insert the Wireless Notebook Adapter into an available CardBus slot. CardBus slots are located on one side of the notebook. Please consult the Notebook Manufacturer's documentation for CardBus installation instructions.

If the Add New Hardware Wizard launchs, please see the Next Pages.

When the Wiress 54Mbps Notebook Adapter is successfully installed, click the Finish button. Restart your PC if prompt and skip to Page 13 to install Client Manager.

6

Installation / Setup

If the Add New Hardware Wizard launches, Click theNext button to continue the wizard.

Serect Search for the best driver for your device. Click theNext button to continue the wizard.

Select only the CD-ROMdrives checkbox, and clear any other checkboxes that are serected. Click theNext button to continue the wizard.

7

Installation / Setup

Click the Next button to continue the wizard.

When the Wireless Notebook Adapter is successfully installed, click the Finish button and restart your PC if prompted.

If the Copying Files… window opens, please select theX:\CBG54L and click theOK button to copy the files. If the window opens again, please selectX:\CBG54 and click theOK button to complete the wizard. (“X” is the drive letter of your PC’sCD-ROMdrive.)

8

Installation / Setup

Windows 2000: If the Digital Signature Not Foundpage opens, informing that no digital signature exists for the driver you are installing, click the Yesbutton to continue the installation process. When the Wireless

Notebook Adapter is successfully installed, click the Finish button.Restart your computer if prompted.

See the Installing Client Managersection to install the Client Manager.

9

Installation / Setup

3.Configuring Wireless Zero Configuration Service:

Note: Skip to Page 13 if you are not using Windows XP or prefer not to use Windows XP's Wireless Zero Configuration service.

If the Wireless Zero Configuration Service is activated, Windows will scan for available wireless access points once the Wireless Notebook Adapter is properly installed. If Windows detects one or more access points, a networking icon appears on the task bar. One or more wireless networks are available appears as a caption accompanying the icon.

Note: If the Wireless Zero Configuration Service is not functioning, select Start>Control Panel>Administrative Tools>Services. Select Automatic in the Startup Type field of Wireless Zero Configuration Service to enable the Wireless Zero Configuration Service. The default value of Wireless Zero Configuration Service is Automatic.

Right click the networking icon in the taskbar and select

View Available Wireless Networks to display a list of available wireless networks. Select an access point network nameor SSIDand click the Connectbutton to establish a connection.

You may need to check the box indicating you are connecting to an unsecured network. See Page 11 if you need to enter an SSID network name or WEP/WPA encryption key.

10