BT BT STUDIO 1100 User Manual

Size:
495.68 Kb
Download

User Guide

BT STUDIO 1100

Section

Welcome…

to your BT Studio 1100 Digital Cordless Telephone

Use Caller Display to see who is calling before you pick up the phone and keep track of incoming calls with the 30 number Calls list.

Use the phonebook to store and dial up to 30 of most frequently used phone numbers.

As a Digitally Enhanced Cordless Telephony (DECT) product, your BT Studio 1100 provides digital quality call clarity.

This User Guide provides you with all the information you need to get the most from your phone.

Before you make your first call you will need to set up your phone. Follow the simple instructions in ‘Getting Started’, on the next few pages.

Need help?

If you have any problems setting up or using your BT Studio 1100 please contact the Helpline on

0870 605 8047.

Alternatively, you may find the answer in ‘Help’ at the back of this guide.

Section

Got everything?

BT Studio 1100 handset BT Studio 1100 base

2 x AAA NiMH rechargeable batteries Mains power adaptor (item code 872260 black product or 016113 white product) Telephone line cord

If you have purchased a BT Studio 1100 multiple pack you will also have the following with each additional handset:

BT Studio 1100 charger 2 x AAA NiMH rechargeable batteries Mains power adaptor for charger (item code 021299 black product or 016116 white product))

4 In this guide

Getting started

Location . . . . . . . . . . . . . . . . . . . . . . . 6 Setting up the base and handset . . . . . 6

Getting to know your phone

Handset buttons . . . . . . . . . . . . . . . . . 10 Sample screen .. . . . . . . . . . . . . . . . . . 11 Base buttons and LEDs . . . . . . . . . . . . 12 Navigating the menus . . . . . . . . . . . . . 13 Menu map. . . . . . . . . . . . . . . . . . . . . . 13

Using the phone

Switching the handset power on/off . . 14 Make an external call . . . . . . . . . . . . . 14 Preparatory dialling . . . . . . . . . . . . . . 14 End a call . . . . . . . . . . . . . . . . . . . . . . 14 Receiving calls . . . . . . . . . . . . . . . . . . 14 Call timer . . . . . . . . . . . . . . . . . . . . . . 15 Earpiece volume . . . . . . . . . . . . . . . . 15 Handset ringer volume . . . . . . . . . . . . 16 Secrecy . . . . . . . . . . . . . . . . . . . . . . . 16 Redial . . . . . . . . . . . . . . . . . . . . . . . . . 16 Last number redial . . . . . . . . . . . . . . . 17 Delete a redial number . . . . . . . . . . . . 17 Delete the redial list . . . . . . . . . . . . . . 17

Phonebook

Store a phonebook entry . . . . . . . . . . 18 Character map . . . . . . . . . . . . . . . . . . 19 Dial a phonebook entry . . . . . . . . . . . 20 Delete a phonebook entry . . . . . . . . . 20 Edit a phonebook entry . . . . . . . . . . . . 21

Caller Display and the calls list

View and dial a calls list entry . . . . . . . 23 Delete a calls list entry . . . . . . . . . . . . 23 Delete all calls list entries . . . . . . . . . . 24 Copy a calls list entry to the

phonebook . . . . . . . . . . . . . . . . . . . . . 24 Call Waiting . . . . . . . . . . . . . . . . . . . . 25

Handset settings

To change the external ringer melody . 26 To change the external ringer volume . 27 To change the internal ringer melody . 27 To change the internal ringer volume . 28 Key beeps . . . . . . . . . . . . . . . . . . . . . 28 Switch beeps on/off . . . . . . . . . . . . . . 29 Auto answer . . . . . . . . . . . . . . . . . . . . 29 Selecting a language . . . . . . . . . . . . . 30 To switch key lock on . . . . . . . . . . . . . 31

In this guide

5

 

 

Quick key lock . . . . . . . . . . . . . . . . . . 31 To switch key lock off . . . . . . . . . . . . . 31 Naming a handset . . . . . . . . . . . . . . . . 32

Base settings

To change the base PIN code . . . . . . . 33 De-registera handset from the base . . 34 To change the ringer melody . . . . . . . . 34 To change the ringer volume . . . . . . . . 35 Reset if you have forgotten your

PIN code . . . . . . . . . . . . . . . . . . . . . . 36

Using additional handsets

Registering a new GAP compatible handset to your BT Studio 1100 base . 37 Internal calls . . . . . . . . . . . . . . . . . . . . 38 Receiving internal calls . . . . . . . . . . . . 38 Paging . . . . . . . . . . . . . . . . . . . . . . . . 38 Transferring calls . . . . . . . . . . . . . . . . 39

Using additional bases

Registering your BT Studio 1100

handset to another base . . . . . . . . . . . 40 Selecting a base to use . . . . . . . . . . . . 41

Help . . . . . . . . . . . . . . . . . . . . . . . . . .43

General information

Safety . . . . . . . . . . . . . . . . . . . . . . . . . 46 General . . . . . . . . . . . . . . . . . . . . . . . 46 Cleaning . . . . . . . . . . . . . . . . . . . . . . . 47 Environmental . . . . . . . . . . . . . . . . . . 48 Product disposal instructions . . . . . . . 49 Guarantee . . . . . . . . . . . . . . . . . . . . . . 50 Returning your phone . . . . . . . . . . . . . 51 How many telephones can you have? . 52 R&TTE . . . . . . . . . . . . . . . . . . . . . . . . 52 Declaration of Conformance . . . . . . . . 53 Switchboard compatibility . . . . . . . . . . 53 Switchboard external line

access code . . . . . . . . . . . . . . . . . . . . 53 To insert a pause . . . . . . . . . . . . . . . . 54 Recall . . . . . . . . . . . . . . . . . . . . . . . . . 54 Dialling mode . . . . . . . . . . . . . . . . . . . 54 Temporary change to dialling mode . . . 55

6 Getting started

WARNING

Do not place your BT Studio 1100 in the bathroom or other humid areas.

Handset range

The BT Studio 1100 has a range of 300 metres outdoors when there is a clear line of sight between the base and the handset. When there is no clear line of sight between the base and the handset, e.g. base indoors and handset either indoors or outdoors, the range could be reduced to 50 metres. Thick stone walls can severely affect the range.

Signal strength

The icon on your handset indicates when you are in range. When it flashes, you are out of range.

When you move out of range of the base, you will hear the out of range tone. This tone is repeated until you move back into range.

IMPORTANT

The base station must be plugged into the mains power socket at all times.

Do not connect the telephone line until the handset is fully charged.

Which socket?

Power socket

Telephone line socket

If you have purchased a BT Studio 1100 multiple pack please follow instructions A andB

A Location

You need to place your BT Studio 1100 close enough to a mains power and telephone socket so that the cables will reach.

The strength of the handset signal depends on where you site the base. Make sure it is at least 1 metre away from other electrical appliances to avoid interference.

Setting up the base and handset

1.Plug the power adaptor and telephone cable into the back of the base.

2.Plug the power adaptor into the mains wall socket and switch the power on. When connected correctly, the green Power light on the base comes on.

 

 

Getting started

7

3. Install the 2 x AAA rechargeable batteries supplied.

Talk/Standby time

 

In ideal conditions, the handset

 

Then slide the battery compartment cover into place.

 

batteries should give about 10

 

 

 

hours talk time or 100 hours

 

 

 

standby on a single charge. The

 

 

 

base must remain plugged in to

 

 

 

the mains and switched on at all

 

 

 

times.

 

 

 

Note that new batteries do not

 

 

 

reach full capacity until they have

 

 

 

been in normal use for several

 

 

 

days.

 

 

 

Battery symbols

 

 

 

– Battery fully charged

 

 

 

– Battery half charged

 

 

 

– Battery low

 

 

 

Battery low warning

 

With batteries installed the display will show:

If the battery charge becomes low

 

during a call you will hear a

 

 

 

 

 

 

warning beep every minute

 

 

 

(provided the battery warning tone

 

 

 

is set to on, see page 28-29).If the

 

 

 

battery runs out you will be cut off.

 

STUDIO

1

You will need to recharge the

 

handset before using it again.

 

 

 

During charging, the (battery) icon

 

 

 

will scroll in the display.

 

The icon will flash while the handset searches for the base.

4.Place the handset in the base to charge, the red charging light comes on and the icon begins scrolling.

8

Getting started

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Battery performance

When the handset has linked with the base the idle

 

To keep your batteries in the best

 

display will be shown:

 

condition, leave the handset off

 

the base for a few hours at a time

 

 

 

 

 

 

 

 

Running the batteries right down

 

 

 

 

 

 

 

 

at least once a week will help them

 

 

 

 

 

 

 

 

last as long as possible.

 

 

 

 

 

 

 

The charge capacity of rechargeable batteries will reduce with time as they wear out, giving the handset less talk/standby time. Eventually they will need to be replaced. New batteries are available from the BT Studio 1100 Helpline on 0870 605 8047.

After charging your handset for the first time, subsequent charging time is about 6–8hours a day. Batteries and handset may become warm during charging. This is normal.

BT Studio 1100 Twin handset

Your BT Studio 1100 handsets are the same, so instructions

throughout this guide apply to both.

Handset numbers

Once registered with the base, each handset will display its handset number, andrespectively.

STUDIO 1

You should charge the handset for at least 24 hours on first charge.

5.Once fully charged, plug the telephone line cord into the telephone wall socket.

BT Studio 1100 multiple pack owners only

B Location

You need to place your BT Studio 1100 charger close enough to a mains power socket so that the cable will reach.

You will need to do the following for each additional handset:

Getting started

9

 

 

Setting up the charger

1.Plug the power adaptor cable into the underside of the charger.

2.Plug the power adaptor into the mains wall socket and switch the power on.

3.Install the 2 x AAA rechargeable batteries supplied into the handset.

4.Place the handset in the charger and charge the handset for at least 24 hours. The red Charging light on the charger comes on and theicon will scroll.

Once the batteries are charged, the icon will flash in the handset display.

Once the handset registers with the base, the icon stops flashing.

Your BT Studio 1100 is ready for use.

10 Getting to know your phone

Handset buttons

Redial/P

Opens the redial list, page 16.

Enters a Pause when storing numbers, page 18 & 53.

Clr./Secrecy

Delete characters, page 18.

Delete calls list entries, page 23.

During a call, press to stop your caller hearing you, page 16.

Talk

Press to make, receive and end calls, page 14.

Press and hold to switch key lock on,page 31.

Press any button then to switch off.

Power / R (Recall)

Switch the handset on/off, page 14.

Used when connected to a switchboard/PBX (page 53) and for some BT Calling Features.

Digit al

C l a r i t

y

ecre

cy

P

 

 

 

S

 

 

 

 

Clr

 

Redial Menu

 

 

 

 

C

 

 

 

 

 

 

a

 

 

 

 

 

 

l

 

 

 

 

 

 

l

 

 

 

 

 

 

s

 

 

 

 

 

Vol

 

 

 

1

 

 

 

 

DE

 

 

A

3

F

 

 

 

 

 

 

 

 

2

BC

 

 

 

 

 

 

 

 

GH

 

 

 

MN

 

 

 

6

 

4

I

5

J

O

 

 

 

 

 

KL

 

 

 

 

 

 

 

 

P

 

 

 

 

WX

QR

 

 

 

9

Y

7

S

T

UV

Z

 

 

 

 

 

 

 

 

8

 

 

 

 

 

 

 

 

 

 

 

0

 

 

 

 

 

R

 

 

Int

 

In-uselight

Comes on when you make/receive a call.

Select /Menu

Press to select menu options, page 13.

Press to access the menu, page 13.

Calls list/Scroll

Opens the Calls list and lets you scroll through the entries, page 23.

Cancel/Phonebook

Go back one level/exit the menu, page 13.

Access the phonebook, page 18.

Int

Use to make an internal call, page 38.

Or to transfer a call to an additional BT Studio 1100 handset, page 39.