BT BT RELATE 3000 User Manual
Size:
1.06 Mb
Download

6346 Relate 3000 UG [2] 12/8/04 11:19 am Page 1

BT Relate 3000 ~ Issue 3 ~ Edition 02 ~ 12.08.04 ~ 6346

User Guide

BT RELATE 3000

6346 Relate 3000 UG [2] 12/8/04 11:19 am Page 2

BT Relate 3000 ~ Issue 3 ~ Edition 02 ~ 12.08.04 ~ 6346

Welcome…

to your BT Relate 3000 Telephone with Caller Display*

Quickdial memory buttons let you store numbers and dial them with a single press. A further 10 names and numbers can be stored in the directory.

1471 & 1571 dedicated buttons let you hear who called you last and dial your network’s answering service.

Handsfree function allows you to make and receive calls over the built-inloudspeaker, without lifting the handset

Amplify incoming or outgoing call volume.

Voice prompts help you use the phone’s features.

VIP ringer - lets you select a different ring tone for important callers.

Wall or desktop mountable – lets you place your phone where it’s most convenient.

*You must subscribe to your network provider’s Caller Display service for this feature to work. A quarterly fee is payable.

6346 Relate 3000 UG [2] 12/8/04 11:19 am Page 3

BT Relate 3000 ~ Issue 3 ~ Edition 02 ~ 12.08.04 ~ 6346

This User Guide provides you with all the information you need to get the most from your phone.

Before you make your first call you will need to set up your phone. Follow the simple instructions in ‘Getting Started’, on the next few pages.

Need help?

If you have any problems setting up or using your BT Relate 3000 please refer to the ‘Help’ section on page 27 of this guide.

Got everything?

BT Relate 3000 telephone

4 x AA batteries

Mains power adaptor

Telephone line cord

Screw & wall plugs for wall-mounting

Base stand

6346 Relate 3000 UG [2] 12/8/04 11:19 am Page 4

BT Relate 3000 ~ Issue 3 ~ Edition 02 ~ 12.08.04 ~ 6346

4In this guide

Getting started

Location . . . . . . . . . . . . . . . . . . . . . . . 6 Install the batteries . . . . . . . . . . . . . . . 6 Connect the mains power adaptor . . . . . 6 Connect the telephone line . . . . . . . . . . 7 Setting the time . . . . . . . . . . . . . . . . . . 7 Setting the ringer volume . . . . . . . . . . . 8 Attach the base stand (optional). . . . . . . 8 Raised on a flat surface. . . . . . . . . . . . . 8Wall-mounted. . . . . . . . . . . . . . . . . . . .9

Getting to know your phone . . . . . . . . 10

Using the phone

Making and ending calls . . . . . . . . . . . . 12 Preparatory dialling . . . . . . . . . . . . . . . 12 Receiving calls . . . . . . . . . . . . . . . . . . . 12 Make a handsfree call . . . . . . . . . . . . . . 12 Answer a call handsfree . . . . . . . . . . . . 13 Secrecy. . . . . . . . . . . . . . . . . . . . . . . . 13 Redial the last number . . . . . . . . . . . . . 13 Redial one of the last 5 numbers . . . . . . 14 Copy a redial number to the directory . . 14 1471 button . . . . . . . . . . . . . . . . . . . . 14 1571 button . . . . . . . . . . . . . . . . . . . . 15 M1 – M3 Quickdial memory buttons. . . . 15 Storing Quickdial numbers . . . . . . . . . . 15 Dialling Quickdial numbers . . . . . . . . . . 16 Deleting Quickdial numbers. . . . . . . . . . 16

Data port . . . . . . . . . . . . . . . . . . . . . . 16 Headset. . . . . . . . . . . . . . . . . . . . . . . 17

Directory

Store name and number . . . . . . . . . . . . 18 Dial from the directory . . . . . . . . . . . . . 19Delete entries . . . . . . . . . . . . . . . . . . . 19

Caller Display and the calls list

Caller Display . . . . . . . . . . . . . . . . . . . . 20 Calls list. . . . . . . . . . . . . . . . . . . . . . . . 20View list . . . . . . . . . . . . . . . . . . . . . . . 21 Dial a number in the list . . . . . . . . . . . . 21 Copy a number to the directory . . . . . . . 21

Personalise your phone

Setting your preferences . . . . . . . . . . . . 22Ringer tone . . . . . . . . . . . . . . . . . . . . . 23LCD contrast . . . . . . . . . . . . . . . . . . . . 23Amplify lock . . . . . . . . . . . . . . . . . . . . 23 VIP ringer . . . . . . . . . . . . . . . . . . . . . . 24Voice prompts . . . . . . . . . . . . . . . . . . . 24Beeps tones . . . . . . . . . . . . . . . . . . . . . 24Call amplifier . . . . . . . . . . . . . . . . . . . . 24Key lock . . . . . . . . . . . . . . . . . . . . . . . 25Recall/M3 . . . . . . . . . . . . . . . . . . . . . . 25 Factory settings . . . . . . . . . . . . . . . . . . 26Re-settingthe phone to its

original settings . . . . . . . . . . . . . . . . . . 26

6346 Relate 3000 UG [2] 12/8/04 11:19 am Page 5

BT Relate 3000 ~ Issue 3 ~ Edition 02 ~ 12.08.04 ~ 6346

In this guide

5

Help . . . . . . . . . . . . . . . . . . . . . . . . . . 27

General information

Safety . . . . . . . . . . . . . . . . . . . . . . . . . 28

General . . . . . . . . . . . . . . . . . . . . . . . . 28

Cleaning . . . . . . . . . . . . . . . . . . . . . . . 28

Environmental . . . . . . . . . . . . . . . . . . . 28

Technical information . . . . . . . . . . . . . . 29

How many telephones can you have? . . 29

Switchboard compatibility . . . . . . . . . . 30

Recall . . . . . . . . . . . . . . . . . . . . . . . . . 30

Guarantee . . . . . . . . . . . . . . . . . . . . . . 31

Returning your phone . . . . . . . . . . . . . . 32

R&TTE . . . . . . . . . . . . . . . . . . . . . . . . 33

Declaration of Conformance . . . . . . . . . 33

6346 Relate 3000 UG [2] 12/8/04 11:19 am Page 6

BT Relate 3000 ~ Issue 3 ~ Edition 02 ~ 12.08.04 ~ 6346

6Getting started

WARNING

Do not place your BT Relate 3000 in the bathroom or other humid areas.

Battery low warning

When your batteries need replacing the battery low icon is displayed.

Replace the batteries by following the steps for battery installation.

Battery performance

New batteries will power your

BT Relate 3000 display for approx. 18 months provided you are also using the mains adaptor to power your BT Relate 3000. If you do not use the power supply then the battery life is approximately 6 months.

Even if your batteries run out or are removed, your BT Relate 3000 will retain any personalised settings for:

One-touchQuickdial memories

Display contrast

Voice prompt

VIP ringer

Loudspeaker volume

Ring tone

Location

Make sure your BT Relate 3000 is close enough to a telephone socket so that the cable will reach.

Install the batteries

1.Turn the phone over, remove the battery compartment cover, then insert the 4 AA alkaline batteries as indicated.

2. Replace the battery cover.

Connect the mains power adaptor

1.Plug the mains power adaptor into the POWER socket on the base of your BT Relate 3000.

6346 Relate 3000 UG [2] 12/8/04 11:19 am Page 7

BT Relate 3000 ~ Issue 3 ~ Edition 02 ~ 12.08.04 ~ 6346

 

Getting started

7

2. Plug the other end into the mains power wall socket.

The voice prompts will not work if

 

 

the mains power is not connected

 

 

and switched on.

 

Connect the telephone line

1. Plug the telephone line cord into the telephone wall socket.

Setting the time

1.Press . Display showsWHERE?. Now press

(located between the andmemory buttons). The display briefly showsSETUP MODE thenHOLD STORE TO EXIT before moving to the first optionRINGER TONE.

2.Press repeatedly until the display shows12:00AM or the currently set time.

3.Use the keypad to enter the time, e.g. 0907 = 9:07.

The clock is 12 hour format.

4.Use the buttons to selectAM orPM, then pressto save the settings and return to standby.

If you have subscribed to your network’s Caller Display service, the time will be set automatically when you receive your first call.

Holding the button down will save any settings changed and exit theset-upmode.

6346 Relate 3000 UG [2] 12/8/04 11:19 am Page 8

8Getting started

Position in 3 different ways

Flat

Raised

BT Relate 3000 ~ Issue 3 ~ Edition 02 ~ 12.08.04 ~ 6346

Setting the ringer volume

The ringer switch is located on the underside of your Relate 3000. There are 3 volume levels: OFF, LOW and HI.

Your BT Relate 3000 is now ready to use.

You may wish to make additional personalised settings. Turn to page 22 to read about the options.

Attach the base stand (optional)

Your BT Relate 3000 can be positioned in 3 different ways; either on a flat surface, in a raised position or wall-mountedusing the screws and wall plugs provided.

Raised on a flat surface

1.Make sure all the cables on the underside of the base are pressed into the cable channels and not in the way.

2.Insert the clips on the base stand into the holes in the base

of your phone marked

RAISED POSITION. You may need to be quite firm to fix it securely.

Wall mounted

6346 Relate 3000 UG [2] 12/8/04 11:19 am Page 9

BT Relate 3000 ~ Issue 3 ~ Edition 02 ~ 12.08.04 ~ 6346

 

Getting started

9

Wall-mounted

Before you wall-mountyour BT

 

 

Relate 3000 check that:

 

Use the base stand provided as a template to pencil on the wall where the drill holes should go.

1.Drill the holes for the screws using a 8mm drill bit. Then insert the wall plugs provided.

2.Insert the screws, leaving about 5mm sticking out.

3.Insert the clips on the base stand into the holes in the base of your phone marked WALL MOUNT. You may need to be quite firm to fix it securely.

The wall can support the weight of the phone.

The position you choose leaves sufficient space so that the phone is clear of any obstruction on the wall, such as a shelf or a cupboard.

The power cable and telephone line cord will reach their correct wall points.

4.Position the wall-mountingslots in the base stand over the screw heads and gently pull the phone downward to make sure it is securely in place. You will need to rotate the handset hook to stop the handset from falling off.

Handset hook

Rotate the handset hook 180˚ so that the handset will stay in position when the phone is wall-mounted.