Brother DCP-8060, DCP 8065DN User Manual 2

0 (0)

USER’S GUIDE

DCP-8060 DCP-8065DN

If you need to call Customer Service

Please complete the following information for future reference:

Model Number: DCP-8060 and DCP-8065DN

(Circle your model number)

Serial Number: 1

Date of Purchase:

Place of Purchase:

1The serial number is on the back of the unit. Retain this User’s Guide with your sales receipt as a permanent record of your purchase, in the event of theft, fire or warranty service.

Register your product on-line at

http://www.brother.com/registration

By registering your product with Brother, you will be recorded as the original owner of the product. Your registration with Brother:

may serve as confirmation of the purchase date of your product should you lose your receipt;

may support an insurance claim by you in the event of product loss covered by insurance; and,

will help us notify you of enhancements to your product and special offers.

The most convenient and efficient way to register your new product is online at http://www.brother.com/registration

© 2006 Brother Industries, Ltd.

Brother numbers

IMPORTANT

For technical help, you must call the country where you bought the machine. Calls must be made from within that country.

Register your product

By registering your product with Brother International Corporation, you will be recorded as the original owner of the product. Your registration with Brother:

may serve as confirmation of the purchase date of your product should you lose your receipt;

may support an insurance claim by you in the event of product loss covered by insurance; and,

will help us notify you of enhancements to your product and special offers.

Please complete and fax the Brother Warranty Registration And Test Sheet or, for your convenience and most efficient way to register your new product, register on-line at

http://www.brother.com/registration

FAQs (frequently asked questions)

The Brother Solutions Center is our one-stop resource for all your Fax Machine/Multi-Function Center needs. You can download the latest software and utilities and read FAQs and troubleshooting tips to learn how to get the most from your Brother product.

http://solutions.brother.com

Note

You can check here for Brother driver updates.

For Customer Service

In USA: 1-800-284-4329 (voice) 1-901-379-1215 (fax)

1-800-284-3238 (TTY service for the hearing-impaired)

In Canada: 1-877-BROTHER (voice) (514) 685-4898 (fax)

Service Center Locator (USA only)

For the location of a Brother authorized service center, call 1-800-284-4357.

Service Center Locations (Canada only)

For the location of a Brother authorized service center, call 1-877-BROTHER.

i

Brother fax back system (USA only)

Brother has installed an easy-to-use fax back system, so you can get instant answers to common technical questions and product information for all Brother products. This system is available 24 hours a day, 7 days a week. You can use the system to receive faxed instructions and an Index of fax back subjects.

In USA only: 1-800-521-2846

Ordering accessories and supplies

For best quality results use only genuine Brother accessories, which are available at most Brother retailers. If you cannot find the accessory you need and you have a Visa, MasterCard, Discover, or American Express credit card, you can order accessories directly from Brother. (In the USA, you can visit us online for a complete selection of the Brother accessories and supplies that are available for purchase.)

In USA:

1-888-879-3232 (voice)

 

1-800-947-1445 (fax)

 

 

 

 

 

 

 

http://www.brothermall.com

 

In Canada:

1–877–BROTHER (voice)

 

 

 

 

Description

 

 

Item

Toner Cartridge

 

 

TN-550 (Standard, Prints approx. 3,500 pages)

 

 

 

TN-580 (High yield, Prints approx. 7,000 pages)

 

 

 

 

Drum Unit

 

 

DR-520

 

 

 

IEEE-1284 Bi-directional Cable

 

F2A046-10

 

 

 

 

Paper Tray #2 (Option)

 

 

LT-5300

 

 

 

 

User’s Guide

 

 

LP2049001 (English for USA and Canada)

 

 

 

LP2049002 (French for Canada)

 

 

 

 

Quick Setup Guide

 

 

LP2053001 (English for USA and Canada)

 

 

 

LP2053002 (French for Canada)

 

 

 

 

 

ii

Notice - Disclaimer of Warranties

(USA and Canada)

BROTHER’S LICENSOR(S), AND THEIR DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS (COLLECTIVELY BROTHER’S LICENSOR) MAKE NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, REGARDING THE SOFTWARE. BROTHER’S LICENSOR(S) DOES NOT WARRANT, GUARANTEE OR MAKE ANY REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF THE USE OF THE SOFTWARE IN TERMS OF ITS CORRECTNESS, ACCURACY, RELIABILITY, CURRENTNESS OR OTHERWISE. THE ENTIRE RISK AS TO THE RESULTS AND PERFORMANCE OF THE SOFTWARE IS ASSUMED BY YOU. THE EXCLUSION OF IMPLIED WARRANTIES IS NOT PERMITTED BY SOME STATES IN THE USA AND SOME PROVINCES IN CANADA. THE ABOVE EXCLUSION MAY NOT APPLY TO YOU.

IN NO EVENT WILL BROTHER’S LICENSOR(S) BE LIABLE TO YOU FOR ANY CONSEQUENTIAL, INCIDENTAL OR INDIRECT DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, AND THE LIKE) ARISING OUT OF THE USE OR INABILITY TO USE THE SOFTWARE EVEN IF BROTHER’S LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME STATES IN THE USA AND SOME PROVINCES IN CANADA DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. IN ANY EVENT BROTHER’S LICENSOR’S LIABILITY TO YOU FOR ACTUAL DAMAGES FROM ANY CAUSE WHATSOEVER, AND REGARDLESS OF THE FORM OF THE ACTION (WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE), WILL BE LIMITED TO $50.

Compilation and Publication Notice

Under the supervision of Brother Industries Ltd., this manual has been compiled and published, covering the latest product descriptions and specifications.

The contents of this manual and the specifications of this product are subject to change without notice.

Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited to typographical and other errors relating to the publication.

iii

Brother® Three-Year Limited Warranty and Exchange Service

For DCP-8060 and DCP-8065DN

(USA only)

Who is covered:

This limited warranty ("warranty") is given only to the original end-use/retail purchaser (referred to in this warranty as "Original Purchaser") of the accompanying product, consumables and accessories (collectively referred to in this warranty as "this Product").

If you purchased a product from someone other than an authorized Brother reseller in the United States or if the product was used (including but not limited to floor models or refurbished product), prior to your purchase you are not the Original Purchaser and the product that you purchased is not covered by this warranty.

What is covered:

This Product includes a Machine and Consumable and Accessory Items. Consumable and Accessory Items include but are not limited to toner, drums, print heads and ink cartridges.

Except as otherwise provided herein, Brother warrants that the Machine and the accompanying Consumable and Accessory Items will be free from defects in materials and workmanship, when used under normal conditions.

This warranty applies only to products purchased and used in the United States. For products purchased in, but used outside, the United States, this warranty covers only warranty service within the United States (and does not include shipping outside the United States).

What is the length of the Warranty Period(s):

Machines have a two-stage warranty: 2 years from the original purchase date and an additional warranty up to 3 years from the original purchase date.

Accompanying Consumable and Accessories Items have a one-stage warranty: 90 days from the original purchase date or the rated life of the Consumable Item, whichever occurs first.

What is NOT covered:

This warranty does not cover:

1Physical damage to this Product;

2Damage caused by improper installation, improper or abnormal use, misuse, neglect or accident (including but not limited to transporting this Product without the proper preparation and/or packaging);

3Damage caused by another device or software used with this Product (including but not limited to damage resulting from use of non Brother®-brand parts and Consumable and Accessory Items);

4Consumable and Accessory Items that expired in accordance with a rated life; and,

5Problems arising from other than defects in materials or workmanship.

6Normal Periodic Maintenance Items, such as Paper Feeding Kit, Fuser and Laser Units.

This warranty is VOID if this Product has been altered or modified in any way (including but not limited to attempted warranty repair without authorization from Brother and/or alteration/removal of the serial number).

What to do if you think your Product is eligible for warranty service:

Report your issue to either our Customer Service Hotline at 1-800-284-4329 or a Brother Authorized Service Center within the applicable warranty period. Supply Brother or the Brother Authorized Service Center with a copy of your dated bill of sale showing that this Product was purchased within the U.S. For the name of local Brother Authorized Service Center(s), call 1-800-521-2846 or visit our web site at www.brother.com.

What Brother will ask you to do:

After contacting Brother or a Brother Authorized Service Center, you may be required to deliver (by hand if you prefer) or send the Product properly packaged, freight prepaid, to the Authorized Service Center together with a photocopy of your bill of sale.

You are responsible for the cost of shipping, packing product, and insurance (if you desire). You are also responsible for loss or damage to this Product in shipping.

iv

Brother® Three-Year Limited Warranty and Exchange Service

For DCP-8060 and DCP-8065DN

(USA only)

What Brother will do:

First 2 Years:

If the problem reported concerning your Machine and/or accompanying Consumable and Accessory Item(s) is covered by this warranty and if (i) you first reported the problem with your Machine to Brother or an Authorized Service Center within 2 years from the original purchase date or (ii) you first reported the problem with the accompanying Consumable and Accessory Items to Brother or an Authorized Service Center within the earlier of 90 days from the original purchase date or the rated life of the item, Brother or its Authorized Service Center will repair or replace the Machine and/or accompanying Consumable and Accessory Item(s) at no charge to you for parts or labor. The decision as to whether to repair or replace the Machine and/or accompanying Consumable and Accessory Item(s) is made by Brother in its sole discretion. Brother reserves the right to supply a refurbished or remanufactured replacement Machine and/or accompanying Consumable and Accessory Item(s) and use refurbished parts provided such replacement products conform to the manufacturer's specifications for new product/parts. The repaired or replacement Machine and/or accompanying Consumable and Accessory Item(s) will be returned to you freight prepaid or made available for you to pick up at a conveniently located Authorized Service Center.

2 Years to 3 Years:

If the problem reported concerning your Machine is covered by this warranty and if you first reported the problem after 2 years, but before 3 years from the original purchase date, Brother or its Authorized Service Center will repair the Machine at no charge to you for parts or labor. Brother reserves the right to use refurbished parts provided such refurbished parts conform to the manufacturer's specifications for new product/parts. The repaired Machine will be returned to you freight prepaid or made available for you to pick up at a conveniently located Authorized Service Center.

If the Machine and/or accompanying Consumable and Accessory Item(s) are not covered by this warranty (either stage), you will be charged for shipping the Machine and/or accompanying Consumable and Accessory Item(s) back to you.

The foregoing are your sole (i.e., only) and exclusive remedies under this warranty.

What happens when Brother elects to replace your Machine:

When a replacement Machine is authorized by Brother, and you have delivered the Machine to an Authorized Service Center, the Authorized Service Center will provide you with a replacement Machine after receiving one from Brother. If you are dealing directly with Brother, Brother will send to you a replacement Machine with the understanding that you will, after receipt of the replacement Machine, supply the required proof of purchase information, together with the Machine that Brother agreed to replace. You are then expected to pack the Machine that Brother agreed to replace in the package from the replacement Machine and return it to Brother using the shipping bill supplied by Brother in accordance with the instructions provided by Brother. Since you will be in possession of two machines, Brother will require that you provide a valid major credit card number. Brother will issue a hold against the credit card account number that you provide until Brother receives your original Product and determines that your original Product is entitled to warranty coverage. Your credit card will be charged up to the cost of a new Product only if: (i) you do not return your original Product to Brother within five (5) business days; (ii) the problems of your original Product are not covered by the warranty; (iii) the proper packaging instructions are not followed and has caused damage to the product; or (iv) the warranty period on your original Product has expired or has not been sufficiently validated with a copy of the proof of purchase (bill of sale). The replacement Machine you receive (even if refurbished or remanufactured) will be covered by the balance of the warranty period remaining on the original Product, plus an additional thirty (30) days. You will keep the replacement Machine that is sent to you and your original Machine shall become the property of Brother. Retain your original

Accessory Items and a copy of the return shipping bill, signed by the courier.

v

Brother® Three-Year Limited Warranty and Exchange Service

For DCP-8060 and DCP-8065DN

(USA only)

Limitations:

Brother is not responsible for damage to or loss of any equipment, media, programs or data related to the use of this Product. Except for that repair or replacement as described above, Brother shall not be liable for any direct, indirect, incidental or consequential damages or specific relief. Because some states do not allow the exclusion or limitation of consequential or incidental damages, the above limitation may not apply to you.

THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER WARRANTIES, WRITTEN OR ORAL, WHETHER EXPRESSED BY AFFIRMATION, PROMISE, DESCRIPTION, DRAWING, MODEL OR SAMPLE. ANY AND ALL WARRANTIES OTHER THAN THIS ONE, WHETHER EXPRESS OR IMPLIED, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED.

This Warranty is the only warranty that Brother is giving for this Product. It is the final expression and the exclusive and only statement of Brother's obligations to you. It replaces all other agreements and understandings that you may have with Brother or its representatives.

This warranty gives you certain rights and you may also have other rights that may vary from state to state.

This Warranty (and Brother's obligation to you) may not be changed in any way unless you and Brother sign the same piece of paper in which we (1) refer to this Product and your bill of sale date, (2) describe the change to this warranty and

(3) agree to make that change.

Important: We recommend that you keep all original packing materials, in the event that you ship this Product.

© 2004 Brother International Corporation

vi

BROTHER MULTIFUNCTION CENTER/FACSIMILE MACHINE

LIMITED WARRANTY (Canada only)

Pursuant to this limited warranty of 1 year from the date of purchase for labour and parts, Brother International Corporation (Canada) Ltd. (“Brother”), or its Authorized Service Centers, will repair this MFC/Facsimile machine free of charge if defective in material or workmanship. This Limited Warranty does not include cleaning, consumables (including, without limitation, print cartridges, print head, toner and drum) or damage caused by accident, neglect, misuse or improper installation or operation, any damage caused from service, maintenance, modifications, or tampering by anyone other than a Brother Authorized Service Representative, or from the use of supplies or consumable items that are non-Brother products. Operation of the MFC/Facsimile machine in excess of the specifications or with the Serial Number or Rating Label removed shall be deemed abuse and all repairs thereafter shall be the sole liability of the end-user/purchaser. In order to obtain warranty service, the MFC/Facsimile machine must be delivered or shipped freight prepaid by the end user/purchaser to a “Brother” Authorized Service Center, together with your Proof of Purchase in the form of a Sales Receipt.

For laser products: Failure to remove the Toner Cartridge (and Toner Drum Unit on applicable models) during shipping will cause severe damage to the MFC/Facsimile and will VOID the Warranty. (Refer to your User’s Guide for proper packaging.)

For ink-jet products: Do not remove the ink cartridges during shipping. Damage to your print head resulting from packing without the ink cartridges will VOID your warranty. (Refer to your User’s Guide for proper packaging.)

BROTHER DISCLAIMS ALL OTHER WARRANTIES EXPRESSED OR IMPLIED INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, EXCEPT TO THE EXTENT THAT ANY WARRANTIES IMPLIED BY LAW CANNOT BE VALIDLY WAIVED.

No oral or written information, advice or representation provided by Brother, its Authorized Service Centers, Distributors, Dealers, Agents or employees, shall create another warranty or modify this warranty. This warranty states Brother’s entire liability and your exclusive remedy against Brother for any failure of the MFC/Facsimile machine to operate properly.

Neither Brother nor anyone else involved in the development, production, or delivery of this MFC/Facsimile machine shall be liable for any indirect, incidental, special, consequential, exemplary, or punitive damages, including lost profits, arising from the use of or inability to use the product, even if advised by the end user/purchaser of the possibility of such damages. Since some Provinces do not allow the above limitation of liability, such limitation may not apply to you.

This Limited Warranty gives you specific legal rights and you may also have other rights which vary from Providence to Providence.

Warranty Service is available at Brother Authorized Service Centers throughout Canada. For Technical Support or for the name and location of your nearest Authorized Service Center call 1–877–BROTHER.

Internet support: support@brother.ca or browse Brother’s Web Site: www.brother.com

Brother International Corporation (Canada) Ltd. 1 Rue Hôtel de Ville

Dollard-Des-Ormeaux, QC H9B 3H6

vii

Table of Contents

 

Section I General

 

1

General information

 

 

Using the documentation .......................................................................................

2

 

Symbols and conventions used in the documentation ....................................

2

 

Accessing the complete User’s Guide ...................................................................

3

 

Viewing documentation ...................................................................................

3

 

Accessing Brother Support (For Windows®) .........................................................

5

 

Control panel overview ..........................................................................................

6

 

Status LED indications ....................................................................................

8

2

Loading documents and paper

 

 

Loading documents .............................................................................................

10

 

Using the ADF ...............................................................................................

10

 

Using the scanner glass ................................................................................

11

 

Acceptable paper and other media......................................................................

11

 

Recommended media ...................................................................................

11

 

Handling and using media .............................................................................

12

 

Loading paper and other media...........................................................................

14

 

Loading paper................................................................................................

14

 

Loading envelopes and other media .............................................................

15

 

Printable Area................................................................................................

16

3

General setup

 

 

Paper settings......................................................................................................

17

 

Paper Type ....................................................................................................

17

 

Paper Size .....................................................................................................

17

 

Tray use in Copy mode .................................................................................

18

 

Tray use in Print mode ..................................................................................

18

 

Volume Settings...................................................................................................

19

 

Beeper volume ..............................................................................................

19

 

Ecology features ..................................................................................................

19

 

Toner save.....................................................................................................

19

 

Sleep time......................................................................................................

19

 

Turning off the scanner lamp .........................................................................

20

 

LCD Contrast .......................................................................................................

20

 

User Settings List ........................................................................................

20

4

Security features

 

 

Security................................................................................................................

21

 

Secure Function Lock....................................................................................

21

viii

Section II Copy

 

5

Making copies

 

 

How to copy.........................................................................................................

26

 

Making a single copy .....................................................................................

26

 

Making multiple copies ..................................................................................

26

 

Stop copying..................................................................................................

26

 

Copy options........................................................................................................

26

 

Changing copy quality ...................................................................................

27

 

Changing text copy resolution .......................................................................

27

 

Enlarging or reducing the image copied ........................................................

28

 

Making N in 1 copies or a poster ...................................................................

29

 

Duplex (2-sided) copying (DCP-8065DN only)..............................................

31

 

Sorting copies using the ADF ........................................................................

33

 

Adjusting contrast ..........................................................................................

33

 

Tray Select ....................................................................................................

34

 

Out of Memory message .....................................................................................

34

Section III Software

 

6

Software and Network features

 

 

Software and Network features ...........................................................................

36

Section IV Appendixes

 

A

Safety and Legal

 

 

Choosing a location .............................................................................................

38

 

To use the machine safely...................................................................................

39

 

Important Information...........................................................................................

42

 

Federal Communications Commission (FCC)

 

 

Declaration of Conformity (USA only)........................................................

42

 

Industry Canada Compliance Statement (Canada only) ..............................

43

 

Disconnect device .........................................................................................

43

 

LAN connection ............................................................................................

43

 

International ENERGY STAR® Compliance Statement ................................

43

 

Laser safety ...................................................................................................

44

 

FDA regulations.............................................................................................

44

 

Important safety instructions..........................................................................

45

 

Trademarks ...................................................................................................

47

B

Options

 

 

Options ................................................................................................................

48

 

Optional Paper Tray (LT-5300)............................................................................

49

 

Memory Board .....................................................................................................

49

 

DIMM types ...................................................................................................

49

 

Installing extra memory .................................................................................

50

ix

C

Troubleshooting and routine maintenance

 

 

Troubleshooting ...................................................................................................

51

 

If you are having difficulty with your machine ................................................

51

 

Improving the print quality .............................................................................

55

 

Error messages ...................................................................................................

59

 

Document jams..............................................................................................

62

 

Paper jams ....................................................................................................

63

 

Routine maintenance...........................................................................................

68

 

Cleaning the outside of the machine .............................................................

68

 

Cleaning the scanner glass ...........................................................................

69

 

Cleaning the laser scanner window...............................................................

70

 

Cleaning the corona wire ...............................................................................

71

 

Cleaning the drum unit ..................................................................................

72

 

Replacing the toner cartridge (TN-550/TN-580) ............................................

73

 

Replacing the toner cartridge ........................................................................

74

 

Replacing the drum unit (DR-520).................................................................

76

 

Replacing periodic maintenance parts.................................................................

78

 

Packing and shipping the machine ......................................................................

79

 

Machine Information ............................................................................................

80

 

Checking the serial number...........................................................................

80

 

Checking the page counters..........................................................................

80

 

Checking remaining life of parts ....................................................................

80

D

Menu and Features

 

 

On-screen programming......................................................................................

81

 

Menu table.....................................................................................................

81

 

Memory storage.............................................................................................

81

 

Menu keys ...........................................................................................................

81

 

Menu Table..........................................................................................................

83

 

Entering Text .......................................................................................................

89

E

Specifications

 

 

General ................................................................................................................

91

 

Print media...........................................................................................................

92

 

Copy ....................................................................................................................

93

 

Scan.....................................................................................................................

94

 

Print .....................................................................................................................

95

 

Interfaces .............................................................................................................

95

 

Computer requirements .......................................................................................

96

 

Consumable items ...............................................................................................

97

 

Ethernet wired network (DCP-8065DN only) .......................................................

98

F

Glossary

 

 

Glossary...............................................................................................................

99

G

Index

 

 

Index ..................................................................................................................

100

x

Section I

General

General information

2

Loading documents and paper

10

General setup

17

Security features

21

1 General information

Using the documentation

Thank you for buying a Brother machine! Reading the documentation will help you make the most of your machine.

Symbols and conventions used in the documentation

The following symbols and conventions are used throughout the documentation.

Bold Bold style indentifies keys on the machine control panel or computer screen.

Italics Italicized style emphasizes an important point or refers you to a related topic.

Courier Courier New font identifies the New messages shown on the LCD

of the machine.

Warning icons tell you what to do to avoid the risk of injury.

Electrical Hazard icons alert you to a possible electrical shock.

Hot Surface icons warn you not to touch MFC parts that are hot.

Caution icons tell you about procedures you must follow to prevent damaging the machine.

Incorrect setup icons alert you to devices and operations that are not compatible with the machine.

Note icons give useful tips.

2

Accessing the complete User’s Guide

The printed User’s Guide does not contain all the information about your machine. The advanced features of the Printer, Network and Scanner are explained in the complete User’s Guide that you can find on the CD-ROM.

Viewing documentation
Viewing documentation (Windows®)

To view the documentation, from the Start menu, point to Brother, MFL Pro Suite from the program group, and then click

User’s Guide.

If you have not installed the software, you can find the documentation by following the instructions below:

a Turn on your PC. Insert the Brother CD-ROM labeled Windows® into your CD-ROM drive.

b If the language selection screen appears, click your language.

c If the model name screen appears, click your model name.The CD-ROM main menu will appear.

If this window does not appear, use

Windows® Explorer to find and run the setup.exe program from the root directory of the Brother CD-ROM.

General information

d Click Documentation.

 

e Click the documentation you want to

1

read:

 

Setup Guide: Setup and software installation instructions.

User's Guide (3 manuals): User’s Guide for stand-alone operations, Network User’s Guide, and Software User’s Guide.

PaperPort User's Guide: Document management software.

How to find Scanning instructions

There are several ways you can scan documents. You can find the instructions as follows:

Software User's Guide:

Scanning a document using the TWAIN driver in Chapter 2

Scanning a document using the WIA driver (For Windows® XP only)

in Chapter 2

Using ControlCenter2 in Chapter 3

Network Scanning (For models with built-in network support) in Chapter 4

PaperPort® User's Guide

Instructions for scanning directly from ScanSoft® PaperPort®

3

Chapter 1

Viewing Documentation (Macintosh®)

a Turn on your Macintosh®. Insert the Brother CD-ROM labeled Macintosh® into your CD-ROM drive. The following window will appear.

b Double-click the Documentation icon.

c If the language selection screen appears, double-click your language.

d Double-click the documentation you want to read:

Setup Guide: Setup and Software installation instructions.

User's Guides (3 manuals): User’s Guide for stand-alone operations, Network User’s Guide, and Software User’s Guide.

How to find Scanning instructions

There are several ways you can scan documents. You can find the instructions as follows:

Software User's Guide:

Scanning from a Macintosh® in Chapter 8 (For Mac OS® 9.1-9.2/Mac OS® X 10.2.4 or greater)

Using ControlCenter2 in Chapter 9 (For Mac OS® X 10.2.4 or greater)

Network Scanning in Chapter 10 (For Mac OS® X 10.2.4 or greater)

Presto!® PageManager® User's Guide

Instructions for scanning directly from Presto!® PageManager®

4

Accessing Brother

Support

(For Windows®)

You can find all the contacts you will need, such as Web support (Brother Solutions Center), Customer Service and Brother Authorized Service Centers on page i and on the Brother CD-ROM.

Click Brother Support on the main menu. The following screen will appear:

To access our web site (www.brother.com) click

Brother Home Page.

To view all Brother Numbers, including Customer Service numbers for the USA and Canada, click Support Information.

To access the USA Brother online shopping mall (www.brothermall.com) for additional product and service information, click Brother Mall.com.

For the latest news and product support information (http://solutions.brother.com/), click

Brother Solutions Center.

To return to the main page, click Back. Or, if you have finished, click Exit.

General information

1

5

Chapter 1

Control panel overview

DCP-8060 and DCP-8065DN have similar control keys.

1Status LED (light emitting diode)

The LED will flash and change color depending on the machine’s status.

2LCD (liquid crystal display)

Displays messages to help you use your machine.

3Menu keys:

Menu

Accesses the main menu.

Clear/Back

Deletes entered data or lets you exit the menu.

OK

Selects a setting. d or c

Scrolls backwards or forwards through menu selections.

a or b

Scrolls through the menus and options.

4Dial pad

Used to enter text.

5Stop/Exit

Stops an operation or exits from a menu.

1

2

 

 

 

 

 

 

 

 

9

 

 

8

6Start

Starts copying or scanning.

7Copy keys

Duplex (DCP-8065DN only)

You can choose Duplex to copy on both sides of the paper.

Contrast/Quality (DCP-8065DN only)

Lets you change the quality or contrast for the next copy.

Contrast (DCP-8060 only)

Lets you change the contrast for the next copy.

Quality (DCP-8060 only)

Lets you change the quality for the next copy.

Enlarge/Reduce

Reduces or enlarges copies.

Tray Select

Lets you change which tray will be used for the next copy.

Sort

Sorts multiple copies using the ADF.

N in 1

You can choose N in 1 to copy 2 or 4 pages onto one page.

6

General information

2

3

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8

7

 

 

8Scan

Puts the machine in Scan mode.

(For details about scanning, see Software User’s Guide on the CD-ROM.)

9Print keys Secure

Prints data saved in memory when you enter your four-digit password.

(For details about using the Secure key, see the Software User’s Guide on the CD-ROM.)

Job Cancel

5

1

6

Press this key to cancel a print job and clear the machine’s memory.

7

Chapter 1

Status LED indications

The Status LED (light emitting diode) will flash and change color depending on the machine’s status.

The LED indications shown in the table below are used in the illustrations in this chapter.

LED

 

 

 

 

LED Status

 

 

 

 

 

LED is off.

 

 

 

 

 

 

 

 

 

 

 

LED is on.

 

Green

 

Yellow

Red

 

 

 

 

 

 

LED is blinking.

 

Green

 

Yellow

Red

 

 

 

 

 

LED

Machine Status

 

Description

 

 

 

 

 

Sleep Mode

 

The power switch is off or the machine is in Sleep mode.

 

 

 

 

 

Warming Up

 

The machine is warming up for printing.

Green

 

 

 

 

 

 

 

 

 

 

Ready

 

The machine is ready to print.

Green

 

 

 

 

 

 

 

 

 

 

Receiving Data

 

The machine is either receiving data from the computer,

 

 

 

 

processing data in memory, or printing data.

Yellow

 

 

 

 

 

 

 

 

 

Data Remaining in

Print data remains in the machine memory.

 

Memory

 

 

 

Yellow

 

 

 

 

 

 

 

 

 

 

 

8

 

 

 

 

 

 

 

 

General information

 

 

 

 

 

 

 

 

Service error

Follow the steps below.

 

 

 

 

1. Turn off the power switch.

1

 

Red

 

2. Wait a few seconds, and then turn it back on and try to print

 

 

 

 

 

again.

 

 

 

 

 

 

 

 

If you cannot clear the error and you see the same service call

 

 

 

 

indication after turning the machine back on, please call Brother

 

 

 

 

Customer Service. (See Brother numbers on page i.)

 

 

 

 

 

 

 

 

Cover open

The front cover or fuser cover is open. Close the cover.

 

 

 

 

 

 

 

 

Toner Life End

Replace the toner cartridge with a new one.

 

 

Red

 

 

 

 

Paper error

Put paper in the tray or clear the paper jam. Check the LCD

 

 

 

 

message.

 

 

 

 

 

 

 

 

Scan lock

Check that the scanner lock lever is released.

 

 

 

 

 

 

 

 

Others

Check the LCD message.

 

 

 

 

 

 

 

 

Out of memory

Memory is full.

 

 

 

 

 

 

Note

When the power switch is off or the machine is in Sleep mode, the LED is off.

9

2 Loading documents and paper

Loading documents

All scan and copy operations can be performed from the ADF or the scanner glass.

Using the ADF

You can use the ADF (automatic document feeder) to scan or copy sheets of paper. The ADF feeds each sheet one at a time.

When loading the ADF, make sure that documents written with ink are completely dry.

Single-Sided Document

Documents must be from 5.8 to 8.5 inches (148.0 to 215.9 mm) wide and from 5.8 to 14 inches (148.0 to 355.6 mm) long, and of a

standard weight (20 lb (80 g/m2)).

2-Sided Document (DCP-8065DN only)

When you load a 2-sided document, the document must be from 5.8 to 8.5 inches (148.0 to 215.9 mm) wide and from 5.8 to 11.7 inches (148.0 to 297.0 mm) long.

For information on the capacity of the ADF see Specifications on page 91.

a Unfold the ADF document output support flap (1).

1

b Fan the pages well.

c Place your documents face up, top edge first in the ADF until you feel them touch the feed roller.

d Adjust the paper guides to fit the width of your documents.

CAUTION

To avoid damaging your machine while using the ADF, do not pull on the document while it is feeding.

To scan non-standard documents see

Using the scanner glass on page 11.

10

Using the scanner glass

You can use the scanner glass to scan or copy the pages of a book or single sheets of paper. Documents can be up to 8.5 inches wide and up to 14 inches long (215.9 mm wide to 355.6 mm long).

To use the scanner glass, the ADF must be empty.

a Lift the document cover.

b Using the document guidelines on the left, center the document face down on the scanner glass.

c Close the document cover.

CAUTION

If the document is a book or is thick, do not slam the cover or press on it.

Loading documents and paper

Acceptable paper and other media

Print quality may vary according to the type of

2

paper you are using.

You can use the following types of media: plain paper, transparencies, labels or envelopes.

For best results, follow the steps below:

Use paper made for plain paper copying.

Use paper that is 20 to 24 lb (75 to 90 g/m2).

Use labels or transparencies which are designed for use in laser printers.

When using transparencies remove each sheet immediately to prevent smudging or paper jams.

Avoid touching the printed surface of the paper immediately after printing.

Use long grain paper with a neutral Ph value, and a moisture content of approx. 5%.

Recommended media

To get the best print quality, we suggest using the following paper.

Paper Type

Item

Plain paper

Xerox 4200DP 20 lb

 

 

 

Hammermill Laser Paper 24

 

lb

 

 

 

(Xerox Premier 80g/m2)

 

(Xerox Business 80 g/m2)

 

(M-real DATACOPY 80 g/m2)

Recycled paper

(Xerox Recycled Supreme)

 

 

Transparency

3M CG 3300

 

 

Labels

Avery laser label #5160

 

(Avery laser label L7163)

 

 

11

Chapter 2

Handling and using media

Store paper in its original packaging and keep it sealed. Keep the paper flat and away from moisture, direct sunlight and heat.

Avoid touching either side of transparencies, as this can decrease the print quality.

Only use transparencies recommended for laser printing.

Only use sharply creased envelopes.

Improper Setup

Do not use any of the following paper, as they will cause paper feed problems: damaged, coated, curled, wrinkled, highly textured, irregularly shaped, or paper that has previously been printed on by a printer.

1 0.08 in. (4 mm) or longer

12

Loading documents and paper

Paper capacity of the paper tray

 

 

Paper size

Paper types

No. of sheets

 

Paper Tray

 

A4, Letter, Legal,

Plain paper, Recycled

up to 250 [20 lb (80

 

(Tray #1)

 

Executive, A5, A6, B5,

paper and Bond paper

g/m2)]

2

 

 

B6 and Folio 1

 

 

 

 

Transparency

up to 10

 

 

 

 

 

 

 

 

 

 

Multi-purpose tray

 

Width: 2.75 to 8.5 in.

Plain paper, Recycled

up to 50 [20 lb (80

 

(MP tray)

 

(69.9 to 215.9 mm)

paper, Bond paper,

g/m2)]

 

 

 

Length: 4.57 to 16.0 in.

Envelope and Labels

 

 

 

 

(116.0 to 406.4 mm)

Transparency

up to 10

 

 

 

 

 

 

 

Paper Tray

 

A4, Letter, Legal,

Plain paper, Recycled

up to 250 [20 lb (80

 

(Tray #2)

 

Executive, A5, B5, B6

paper and Bond paper

g/m2)]

 

 

 

and Folio 1

 

 

 

1 Folio size is 8 in. × 13 in.

 

 

 

 

13

Brother DCP-8060, DCP 8065DN User Manual 2

Chapter 2

Loading paper and other media

When printing on plain paper 16 to 28 lb (60

to 105 g/m2) or laser transparencies use the paper tray.

For printing on other types of media use the MP tray (Multi-purpose tray).

Loading paper

a Unfold the output paper tray support flap.

b Pull the paper tray completely out of the machine.

c While pressing the blue paper-guide release lever (1), slide the paper guides to fit the paper size. Make sure that the guides are firmly in the slots.

For legal size paper, press the lever (2) located at the back of the tray and pull out of the back of the open tray. Move the tray lock button (3) to the lock position.

(1)

(2)

(3)

 

(1)

d Fan the stack of paper well to avoid paper feeding problems.

e Insert the paper into the paper tray with the top edge of the paper first and the print side down.

Make sure that the paper is flat in the tray and below the maximum paper mark (1).

(1)

f Push the paper tray firmly back into the machine.

14

Loading envelopes and other media

Use the MP tray when printing envelopes, labels, and thick paper.

a Open the MP tray and lower it gently.

b Pull out the MP tray support.

Loading documents and paper

Loading Envelopes

Before loading, press the corners and sides of the envelopes to make them as flat as possible.

2

CAUTION

Do not use the following types of envelopes, as they will cause paper feed problems:

That are of a baggy construction.

That are embossed (have raised writing on them).

That have clasps or staples.

That are pre-printed on the inside.

Glue

Rounded

Double

Triangular

flap

flap

flap

 

 

c Insert the media into the MP tray with the top edge first and the printing side face up.

15

Chapter 2

Printable Area
Printable Area for copies

The printable area of your machine begins at approximately 0.12 in. (3 mm) from the top and bottom and 0.09 in. (2.3 mm) from both sides of the paper.

2

2

1

1

10.12 in. (3 mm)

20.09 in. (2.3 mm)

Note

This printable area shown above is for a single copy using Letter size paper. The printable area changes with the paper size.

16

Printable Area when printing from a computer

When using the default driver the printable area is smaller than the paper size, as shown below.

Portrait

2

2

1

1

10.16 in. (4.23 mm)

20.25 in. (6.35 mm)

Landscape

2

2

1

1

10.16 in. (4.23 mm)

20.2 in. (5.08 mm)

Note

The printable area shown above is for Letter size paper. The printable area changes with the paper size.

3 General setup

Paper settings

Paper Type

Set up the machine for the type of paper you are using. This will give you the best print quality.

a Choose one of the options below:

To set the paper type for the MP Tray press Menu, 1, 1, 1.

To set the paper type for Tray#1 press Menu, 1, 1, 2.

To set the paper type for Tray#2 press Menu, 1, 1, 3 if you installed the optional tray.

11.Paper Type 1.MP Tray

aPlain

bThick Select ab & OK

b Press a or b to select Thin, Plain,

Thick, Thicker, Transparency or Recycled Paper. Press OK.

c Press Stop/Exit.

Note

Transparency is not available for the optional Tray #2.

You can choose Transparency only if

A4, Letter, Legal or Folio size was chosen as the paper size.

Paper Size

You can use nine sizes of paper for printing

 

copies: A4, Letter, Legal, Executive, A5, A6,

3

B5, B6 and Folio (8”×13”).

When you change the size of paper in the tray, you will also need to change the setting for paper size at the same time so your machine can fit the document on the page.

a Choose one of the options below:

To set the paper size for the MP Tray press Menu, 1, 2, 1.

To set the paper size for Tray#1 press Menu, 1, 2, 2.

To set the paper size for Tray#2 press Menu, 1, 2, 3 if you installed the optional tray.

12.Paper Size 1.MP Tray

aLetter

bLegal Select ab & OK

b Press a or b to select A4, Letter,

Legal, Executive, A5, A6, B5, B6,

Folio or Any. Press OK.

c Press Stop/Exit.

Note

Any (size) appears only when you select the MP tray (Menu, 1, 2, 1).

If you select Any for the MP Tray Paper Size: You must choose MP Only for the Tray Use setting. You cannot use the Any Paper Size selection for the MP tray when making N in 1 copies. You must choose one of the other available Paper Size selections for the MP tray.

A6 size is not available for the optional Tray #2.

17

Chapter 3

Tray use in Copy mode

You can change the priority tray that the machine will use for printing copies.

When you select Tray#1 Only, MP Only or

Tray#2 Only 1, the machine loads the paper only from that tray. If the selected tray is out of paper, No Paper will appear on the LCD. Insert the paper in the empty tray.

To change the tray setting follow the instructions below:

a Press Menu, 1, 5, 1.

15.Tray Use 1.Copy

aMP>T1

bT1>MP Select ab & OK

b Press a or b to select Tray#1 Only,

Tray#2 Only 1, MP Only,

MP>T1>T2 1 or T1>T2 1>MP. Press OK.

1Tray#2 Only or T2 appears only if the optional tray is installed.

c Press Stop/Exit.

Note

When loading the documents from the ADF and MP>T1>T2 or T1>T2>MP is selected, the machine looks for the tray with the most suitable paper and pulls paper from that tray. If no tray has suitable paper, the machine pulls paper from the higher priority tray.

When using the scanner glass, your document is copied from the higher priority tray even if more suitable paper is in another paper tray.

Tray use in Print mode

You can change the default tray the machine will use for printing from your computer.

a Press Menu, 1, 5, 2.

15.Tray Use 2.Print

aMP>T1

bT1>MP Select ab & OK

b Press a or b to select Tray#1 Only,

Tray#2 Only 1, MP Only,

MP>T1>T2 1 or T1>T2 1>MP. Press OK.

1Tray#2 Only or T2 appears only if the optional tray is installed.

Note

The setting in the printer driver will take priority over the setting made on the control panel.

If the control panel is set to

Tray#1 Only, Tray#2 Only, MP Only or MP>T1>T2 and you choose ‘Auto Select’ in the printer driver, the tray use will be MP>T1>T2.

If the control panel is set to T1>T2>MP and you choose ‘Auto Select’ in the printer driver, the tray use will remain T1>T2>MP.

18

Loading...
+ 86 hidden pages