BAS-415 - Quick Reference Guide
For Technical Assistance Please Call 1-877-4BROTHER
ENTERING DISK DATA & SETTING THE COLOR SEQUENCE
1. |
|
Use BACK and FORWARD keys |
||
|
to pick an empty memory location. |
|||
2. |
Insert floppy disk into disk drive |
|||
3. |
ENTER |
Press ENTER. |
||
|
||||
4. |
|
Press UP or DOWN arrow to begin |
||
|
reading the disk. |
|||
5. |
|
Press UP or DOWN arrows to scroll |
||
|
the disk directory. |
|||
|
|
* |
Press (*) key to read |
|
|
|
the design name. |
||
6. |
ENTER |
Press ENTER to copy the design to |
||
the machine memory. |
||||
|
||||
7. |
START |
Press START to calculate design |
||
size and number of color changes. |
||||
|
||||
8. |
NEEDLE |
Press NEEDLE SET to enter |
||
SET |
color programming mode. |
|||
9. |
|
Press UP or Down arrow keys to |
||
|
assign needle number (Color). |
|||
|
|
|
A = Needle Number 10 |
|
|
|
|
B = Needle Number 11 |
|
|
|
|
C = Needle Number 12 |
|
10. |
Press FORWARD arrow to select |
|||
next color of design or BACK arrow |
for previous color of design.
11. |
END |
Press END to exit needle set mode. |
|
||
|
|
12.
13.
14.
#
START
Use ARROW keys to center your design in the frame.
Press (#) key to trace the mask (outside edge) of the design.
Press START to start sewing.
ENTER A DESIGN FROM EDITOR MODE
|
Use BACK and FORWARD keys |
|
to pick an empty memory location. |
ENTER |
Press ENTER. |
#Press the (#) key until “EDITOR” appears on the screen.
Press UP or DOWN arrows to begin reading computer directory.
ENTER |
Press ENTER to copy the design to |
|
the machine memory. |
||
|
||
START |
Press START to calculate design |
|
size and number of color changes. |
||
|
Program color sequence (see Step 8)
Use ARROW keys to center your design (see Step 12)
Press (#) key to trace the mask of the design (see Step 13)
Press START to start sewing (see Step 14)
ENTER A DESIGN FROM THE MACHINE MEMORY
|
Use BACK and FORWARD keys |
|
to pick a design from memory. |
ENTER |
Press ENTER to view design name |
START |
Press START to calculate design |
|
size and number of color changes. |
||
|
||
Program color sequence (see Step 8) |
Use ARROW keys to center your design (see Step 12)
Press (#) key to trace the mask of the design (see Step 13)
Press START to start sewing (see Step 14)