Brother 885-X06-X08-X16-X18-X26-X28 User Manual

Size:
2.71 Mb
Download

Operation Manual

Sewing Machine

Product Code: 885-X06/X08/X16/X18/X26/X28

Manual de instrucciones

Máquina de coser

Código de producto: 885-X06/X08/X16/X18/X26/X28

ENGLISH

ESPAÑOL

Please visit us at http://solutions.brother.com where you can get product support and answers to frequently asked questions (FAQs).

Visítenos en http://solutions.brother.com donde hallará consejos para la solución de problemas así como la lista de preguntas y respuestas más frecuentes.

——————

IMPORTANT SAFETY

INSTRUCTIONS

Please read these safety instructions before attempting to use the machine.

DANGER - To reduce the risk of electric shock:

1 Always unplug the machine from the electrical outlet immediately after using, when cleaning, when making any user servicing adjustments mentioned in this manual, or if you are leaving the machine unattended.

WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons.

2 Always unplug the machine from the electrical outlet when making any adjustments mentioned in the instruction manual:

To unplug the machine, switch the machine to the symbol “O” position to turn it off, then grasp the plug and pull it out of the electrical outlet. Do not pull on the cord.

Plug the machine directly into the electrical outlet. Do not use an extension cord.

Always unplug your machine if the power is cut.

3 Never operate this machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or water is spilled on the unit. Return the machine to the nearest authorized dealer or service center for examination, repair, electrical or mechanical adjustment.

While the machine is stored or in use if you notice anything unusual, such as an odor, heat, discoloration or deformation, stop using the machine

and immediately unplug the power cord.

When transporting the machine, be sure to carry it by its handle. Lifting the machine by any other part may damage the machine or result in the machine falling, which could cause injuries.

When lifting the machine, be careful not to make any sudden or careless movements, otherwise you may injure your back or knees.

4 Always keep your work area clear:

Never operate the machine with any air openings blocked. Keep ventilation openings of the machine and foot control free from the build up of lint, dust, and loose cloth.

Do not store objects on the foot controller.

Do not use extension cords. Plug the machine directly into the electrical outlet.

Never drop or insertany object intoany opening.

Do not operate where aerosol (spray) products are being used or where oxygen is being administered.

Do not use the machine near a heat source, such as a stove or iron; otherwise, the machine, power cord or garment being sewn may ignite, resulting in fire or an electric shock.

Do not place this machine on an unstable surface, such as an unsteady or slanted table, otherwise the machine may fall, resulting in injuries.

5 Special care is required when sewing:

Always pay close attention to the needle. Do not use bent or damaged needles.

1

———————

Keep fingers away from all moving parts. Special care is required around the machine needle.

Switch the machine to the symbol “O” position to turn it off when making any adjustments in the needle area.

Do not use a damaged or incorrect needle plate, as it could cause the needle to break.

Do not push or pull the fabric when sewing, and follow careful instruction when freehand stitching so that you do not deflect the needle and cause it to break.

6 This machine isnot a toy:

Your close attention is necessary when the machine is used by or near children.

The plastic bag that this machine was supplied in should be kept out of the reach of children or disposed of.

Never allow children to play with the bag due to the danger of suffocation.

Do not use outdoors.

7 For a longer service life:

When storing this machine, avoid direct sunlight and high humidity locations. Do not use or store the machine near a space heater, iron, halogen lamp, or other hot objects.

Use only neutral soaps or detergents to clean the case. Benzene, thinner, and scouring powders can damage the case and machine, and should never be used.

Always consult the operation manual when replacing or installing any assemblies, the presser feet, needle, or other parts to assure correct installation.

8 For repair or adjustment:

If the Light unit (light-emittingdiode) is damaged, it must be replaced by authorized dealer.

In the event a malfunction occurs or adjustment is required, first follow the

troubleshooting table in the back of the operation manual to inspect and adjust the machine yourself. If the problem persists, please consult your local authorized Brother dealer.

Use this machine only for its intended use as described in this manual.

Use accessories recommended by the manufacturer as contained in this manual.

The contents of this manual and specifications of this product are subject to change without notice.

For additional product information, visit our web site at www.brother.com

SAVE THESE INSTRUCTIONS

This machine is intended for household use.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

FOR USERS IN THE UK, EIRE, MALTA AND CYPRUS ONLY

IMPORTANT

In the event of replacing the plug fuse, use a fuse approved by ASTA to BS 1362, i.e. carrying the

mark, rating as marked on plug.

Always replace the fuse cover. Never use plugs with the fuse cover omitted.

If the available electrical outlet is not suitable for the plug supplied with this equipment, you should contact your authorized dealer to obtain the correct lead.

2

——————

CONTENTS

 

IMPORTANT SAFETY INSTRUCTIONS ...........

1

1. KNOWING YOUR SEWING

 

MACHINE ..................................

4

ACCESSORIES .................................................

4

Optional accessories ..........................................

4

THE MAIN PARTS ...........................................

5

Flat bed attachment ............................................

5

USING YOUR SEWING MACHINE ................

6

Connecting plugs ...............................................

6

Main power and sewing light switch ..................

7

Foot controller ....................................................

7

Checking the needle ...........................................

7

Replacing the needle ..........................................

7

Changing the presser foot ...................................

8

THE CONTROLS .............................................

9

Pattern selection dial ..........................................

9

Stretch stitching ..................................................

9

Patterns and stitch names .................................

10

Stitch length dial ..............................................

12

Stitch width dial ...............................................

12

Reverse sewing lever ........................................

13

THREADING THE MACHINE .......................

13

Winding the bobbin .........................................

13

Lower threading ...............................................

15

Lower threading (for models equipped with a

 

quick-setbobbin) .............................................

16

Upper threading ...............................................

17

Using the needle threader (for models equipped

with a needle threader) .....................................

19

Drawing up the lower thread ............................

21

FABRIC, THREAD, AND NEEDLE

 

COMBINATIONS .........................................

22

2. SEWING BASICS ......................

23

Please read before sewing ................................

23

Starting sewing .................................................

23

Trial sewing ......................................................

24

Changing the sewing direction .........................

24

Sewing thick fabrics .........................................

24

Sewing thin fabrics ...........................................

25

Sewing stretch fabrics .......................................

25

Stitching cylindrical pieces ...............................

25

Sewing with a twin needle (Option) .................

25

Thread tension .................................................

27

3. BUILT-INSTITCHES .................

28

Straight stitching ...............................................

28

Zigzag stitching .................................................

28

Blind hem stitching ...........................................

28

Shell tuck stitching ............................................

30

Elastic stitching .................................................

30

Double action stitching .....................................

31

Fagoting ............................................................

31

Overedge stitching ............................................

32

Feather stitching ................................................

33

Triple zigzag stretch stitching ............................

33

Decorative stitching ..........................................

33

4. SEWING BUTTONHOLES AND

 

BUTTONS ...............................

34

Making a buttonhole

 

(1-stepautomatic buttonhole) ...........................

34

Adjusting buttonholes .......................................

36

Sewing buttons .................................................

37

5. USING ATTACHMENTS AND

 

APPLICATIONS .......................

38

Zipper insertion ................................................

38

Gathering ..........................................................

39

Darning ............................................................

39

Appliqués .........................................................

39

OPTIONAL ACCESSORIES ...........................

40

Using the walking foot ......................................

40

Using the quilting guide ....................................

41

Using the quilting foot ......................................

41

Using the 1/4-inchquilting foot ........................

42

Using the narrow hemmer foot .........................

42

Using the blind stitch foot .................................

44

6. APPENDIX ................................

45

MAINTENANCE ...........................................

45

Restrictions on oiling ........................................

45

Precautions on storing the machine ..................

45

Cleaning ...........................................................

45

TROUBLESHOOTING ..................................

47

INDEX ..........................................................

50

3

———————

1 KNOWING YOUR SEWING MACHINE

1

ACCESSORIES

We have designed these accessories to help you easily perform most sewing tasks.

1.

2.

3.

4.

5.

6.

7.

8.

9.

 

No.

Part Name

Part Code

 

 

Americas

Others

1

Zigzag foot “J”

XC4901-021

(on machine)

 

 

 

2

Buttonhole foot “A”

XD1792-031

3

Zipper foot “I”

XE9369-001

4

Darning Plate

XC6063-021

5

Button sewing foot “M”

XE2137-001

No.

Part Name

Part Code

 

 

Americas

Others

6

Bobbin

SA156

SFB:

(One is on machine)

XA5539-151

 

 

7

Needle set

3-pieceset:

XE5328-001

(90/14 needle)

2-pieceset:XE7064-001

 

8

Oval screwdriver

XE5241-001

9

Foot controller

See page 5

Note

● The included accessories vary depending on the machine model.

Optional accessories

The following are available as optional accessories to be purchased separately. Depending on the model you purchased, the following accessory may be included with your machine.

1.

2.

3.

4.

5.

 

6.

7.

8.

 

No.

Part Name

Part Code

 

 

Americas

Others

1

Extra spool pin

XE2241-001

2

Twin needle

X57521-021

(2.0/75 needle)

 

 

 

3

Walking Foot

SA107

F034N:

XC2165-002

 

 

 

4

Quilting Foot

SA129

F005N:

XC1948-052

 

 

 

No.

Part Name

Part Code

 

 

Americas

Others

5

1/4-inchQuilting Foot

SA125

F001N:

XC1944-052

 

 

 

6

Narrow Hemmer Foot

SA127

F003N:

XC1945-052

 

 

 

7

Blind Stitch Foot

SA134

F018N:

XC1976-052

 

 

 

8

Quilting guide

SA132

F016N:

XC2215-052

 

 

 

4

KNOWING YOUR SEWING MACHINE—————

THE MAIN PARTS

6 5 4

3 2

1

7

 

E

 

 

8

 

 

 

 

J

 

 

D

 

 

9

 

 

F

 

 

 

 

 

0

 

 

K

G

 

 

 

 

 

 

 

 

 

 

A

C

 

 

H

I

 

B

 

 

 

1Bobbin winder (Page 13)

This winds the thread onto the bobbin for use as the lower thread.

2Stitch length dial (Page 12)

Rotate the dial to control the stitch length.

3Spool pin (Page 14, 17)

This holds the spool of thread.

4Stitch width dial (Page 12)

Rotate the dial to control the stitch width.

5Upper tension-controldial (Page 27)

This controls the tension of the upper thread.

6Thread guide (Page 14, 17)

This is used when winding the thread onto the bobbin and then threading the machine.

7Thread take-uplever (Page 18)

8Thread cutter (Page 24)

Pass the threads through the thread cutter to cut them.

9Needle threader (Page 19)

(This is only available on certain models.)

0Quick-setbobbin (Page 16)

(This is only available on certain models.)

AFlat bed attachment with accessory compartment (Page 5)

BPresser foot (Page 8)

CReverse sewing lever (Page 13)

Push this lever to stitch in the reverse direction.

DPattern selection dial (Page 9)

Rotate the dial in either direction to choose the stitch you want.

EHandwheel

Used to manually raise and lower the needle.

FButtonhole fine-adjustmentscrew (Page 36)

GMain power and sewing light switch (Page 7)

You can turn the main power and sewing light switch on and off.

HFoot controller jack / socket (Page 6)

Plug in the foot controller plug and connect the machine to the power supply.

IPresser foot lever (Page 18)

Used to raise and lower the presser foot.

JButtonhole lever (1-Stepautomatic buttonhole) (Page 34)

Lower the buttonhole lever when sewing buttonholes.

KFoot controller (Page 7)

You can use this to control the sewing speed, and to start and stop sewing.

Foot Controller: Model KD-1902for 110/120V area ModelKD-2902for 220/240V area

The foot controller part code differs depending on the country or region. Contact your dealer or the nearest authorized service center.

Flat bed attachment

The accessories can be stored in a compartment inside the flat bed attachment.

1 Slideopen theit. flat bed attachment to the left to

1

2

1Flat bed attachment

2Storage compartment

5

———————

USING YOUR SEWING MACHINE

1

WARNING

Use only regular household electricity for the power source. Using other power sources may result in fire, electric shock, or damage to the machine.

Make sure that the plugs on the power cord are firmly inserted into the electrical outlet and the power supply jack on the machine.

Do not insert the plug on the power cord into an electrical outlet that is in poor condition.

Turn off the main power and remove the plug in the following circumstances:

When you are away from the machine

After using the machine

When the power fails during use

When the machine does not operate correctly due to a bad connection or a disconnection

During electrical storms

CAUTION

Use only the power cord included with this machine.

Do not use extension cords or multi-plugadapters with many other appliances plugged in to them. Fire or electric shock may result.

Do not touch the plug with wet hands. Electric shock may result.

When unplugging the machine, always turn off the main power first. Always grasp the plug to remove it from the outlet. Pulling on the cord may damage the cord, or lead to fire or electric shock.

Do not allow the power cord to be cut, damaged, modified, forcefully bent, pulled, twisted, or bundled. Do not place heavy objects on the cord. Do not subject the cord to heat. These things may damage the cord and cause fire or electric shock. If the cord or plug is damaged, take the machine to your authorized dealer for repairs before continuing use.

Unplug the power cord if the machine is not to be used for a long period of time. Otherwise a fire may result.

Connecting plugs

1Connect the foot controller plug to the machine.

2Connectoutlet. the power supply plug to a wall

2

1

Note

If a power outage occurs while the sewing machine is being operated, turn off the main power and unplug the power supply cord. When restarting the sewing machine, follow the necessary procedure to correctly operate the machine.

(For U.S.A. only)

This appliance has a polarized plug (one blade wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug.

If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the plug in any way.

6

KNOWING YOUR SEWING MACHINE—————

Main power and sewing light switch

This switch turns the main power and sewing light on or off.

1

2

1Turn on (toward the ‘I’ mark)

2Turn off (toward the ‘O’ mark)

Foot controller

When you press the foot controller down lightly, the machine will run at a low speed. When you press harder, the machine’s speed will increase. When you take your foot off the foot controller, the machine will stop.

1

2

1Slower

2Faster

You should make sure that nothing is placed on the foot controller when the machine is not in use.

CAUTION

Do not allow pieces of cloth and dust to build up on the foot controller. Doing so could cause a fire or an electric shock.

Note

(For U.S.A. only)

Foot Controller: Model KD-1902

This foot controller can be used on the machine with product code 885-X06,885-X08,885-X26,885-X28.

The product code is mentioned on the machine rating plate.

Checking the needle

The sewing needle must always be straight and sharp for smooth sewing.

Checking the needle correctly

Put the flat side of the needle on a flat surface. Check the needle from the top and the sides. Dispose of any bent needles safely.

1

2

1Parallel space

2Level surface (bobbin cover, glass, etc.)

Replacing the needle

CAUTION

Always turn off the machine before you change the needle. Otherwise, injuries may occur if the foot controller is accidentally pressed and the machine starts sewing.

Only use sewing machine needles for home use. Other needles may bend or break and cause injury.

Never sew with a bent needle. A bent needle will easily break and cause injury.

1Turn off the machine.

2Raise the needle by turning the handwheel toward you (counterclockwise) so that the mark on the wheel points up.

3Lower the presser foot lever.

1

1 Presser foot lever

7

———————

CAUTION

Before replacing the needle, place fabric or paper under the presser foot to prevent the needle from falling into the hole in the needle plate.

4Hold the needle with your left hand, and then use an oval screwdriver to turn the needle clamp screw counterclockwise to remove the needle.

2 1

1Use an oval screwdriver

2Needle clamp screw

Do not use excessive force when loosening or tightening the needle clamp screw, otherwise certain parts of the sewing machine may be damaged.

5With the flat side of the needle toward the back of the machine, insert the needle until it touches the needle stopper. Next, tighten the needle clamp using an oval screwdriver.

2

3

1

1Use an oval screwdriver

2Needle stopper

3Needle

Install the twin needle in the same way.

CAUTION

Make sure you insert the needle until it

1

touches the stopper, and securely tighten

 

the needle clamp screw with an oval

 

screwdriver, otherwise the needle may

 

break or the machine may be damaged.

 

Changing the presser foot

CAUTION

Always turn off the machine before you change the presser foot. If you leave the power on and step on the controller, the machine will start and you may be injured.

Always use the correct presser foot for the stitch pattern you have chosen. If you use the wrong presser foot, the needle may strike the presser foot and bend or break, and may cause injury.

Only use presser feet that have been designed to be used with this machine. Using any other presser foot may cause accident or injury.

You will have to change the presser foot depending on what you want to sew and how.

1Turn off the machine. Raise the presser foot lever.

2Raise the needle by turning the handwheel toward you (counterclockwise) so that the mark on the wheel points up.

3Press the black button at the back of the presser foot holder to release the presser foot.

1

2

3

1

Black button

 

2

Presser foot holder

 

3

Presser foot

4Put a different presser foot on the needle plate so that the bar on the presser foot is in line with the slot on the shank.

8

KNOWING YOUR SEWING MACHINE—————

5Lower the presser foot lever and fix the presser foot onto the shank. If the presser foot is in the correct place, the bar should snap in.

12

1Shank

2Bar

Presser foot installation orientation

CAUTION

If the presser foot is not installed with the correct orientation, the needle may strike the presser foot, which may bend or break the needle and cause injury.

THE CONTROLS

Pattern selection dial

CAUTION

When you use the pattern selection dial to choose a pattern, raise the needle by turning the handwheel toward you (counterclockwise) so that the mark on the wheel points up. If the needle is in the down position when you turn the pattern selection dial, the needle, presser foot or fabric may be damaged.

To choose a stitch, simply turn the pattern selection dial in either direction. The next section shows recommended stitch lengths and widths.

2

1

1Pattern selection dial

2Chosen pattern number

Stretch stitching

Raise the needle by turning the handwheel toward you (counterclockwise) so that the mark on the wheel points up.

Setting the stitch length dial to “” changes the selected pattern to a stretch stitch.

9