Breville BMF600XL Issue - E11 User Manual

Size:
1.76 Mb
Download

Breville Customer Service Center

US Customers

Canada Customers

Mail:

Breville USA

Mail:

Breville Canada

 

19400 S. Western Ave

 

2555, Avenue de l’Aviation

 

Torrance CA

 

Pointe-Claire(Montreal)

 

CA 90501-1119

 

Quebec H9P 2Z2

Phone: Customer Service

Phone: Customer Service

 

1 (866) BREVILLE

 

1 (866) BREVILLE

Email:

Customer Service:

Email:

Customer Service:

 

askus@brevilleusa.com

 

askus@breville.ca

www.breville.com

Breville is a registered trademark of Breville Pty. Ltd. A.B.N. 98 000 092 928.

Copyright Breville Pty. Ltd. 2011.

Due to continued product improvement, the products illustrated/photographed in this booklet may vary slightly from the actual product.

the Milk Café™

Instruction Booklet

 

Instruction Book - Livret d’instructions

Model BMF600XL Issue - E11

BMF600XL

CONGRATULATIONS

on the purchase of your new Breville Milk Café™

Contents

4 Breville recommends safety first

7 Know your Breville Milk Café™

10 Operating your Breville Milk Café™

16 Care & cleaning

18 Hints & tips

20 Troubleshooting

24 Recipes

29 One Year Limited Warranty

30 French

3

Breville recommends safety first

We at Breville are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer, foremost in mind. In addition, we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions:

Important safeguards

This product is an ISM device that complies with Part 18 of the FCC Rules and with

Canadian ICES-001.

Read all instructions

Carefully read all instructions before operating the appliance for the first time and save for future reference.

Remove and safely discard any packaging materials and promotional labels before using the appliance for the first time.

To eliminate a choking hazard for young children, remove and safely discard the protective cover fitted to the power plug of this appliance.

To protect against electrical shock, do not immerse the power cord, power plug or motor base in water or any other liquid, or allow moisture to come into contact with these parts.

Do not place the appliance near the edge of a bench or table during operation.

Do not place the appliance on or near a hot gas or electric burner, or where it could touch any other source of heat.

Do not use on a sink drain board.

Always use the appliance on a dry, level surface.

Keep the appliance clear of walls, curtains and other heat or steam sensitive materials.

Provide adequate space above and on all sides for air circulation around the appliance.

Unwind the power cord fully before use.

Do not allow the power cord to hang over the edge of a table or counter, touch hot surfaces or become knotted.

The appliance is not intended to be operated by means of an external timer or separate remote control system.

Do not touch hot surfaces. Use handles or knobs.

The appliance has been designed specifically for the purpose of foaming milk and other dairy milk alternatives and is not intended to whip, thicken or heat other food substances eg. oil, eggs, butter, heavy whipping cream, soups, gravies etc.

The appliance is not designed to mix a large quantity of dry ingredients or melt large food pieces eg. cubed chocolate, ground nuts, whole spices, fresh herbs, ice cubes etc.

The underside of the jug must always be clean and dry before placing onto the power base.

Attach the jug lid securely to the jug before operation. Do not remove the jug lid during operation.

Use caution when pouring foamed milk from the jug as the jug and hot milk may scald.

Do not operate the appliance without liquid. Always fill to at least the ‘MIN’ marking and no more than the ‘MAX’ marking inside the jug.

The jug must only be used with the power base provided. Do not use attachments other than those provided with the appliance as it may result in fire, electric shock or injury to persons.

Do not put metal or similar items into the jug as this may damage or affect the operation of the appliance.

Breville recommends safety first

To disconnect, press the START|STOP button (the button surround should stop flashing), then remove the plug from from power outlet.

Always remove the plug from the power outlet and allow to cool if the appliance is not in use, before attempting to move the appliance, before cleaning, disassembling, assembling and when storing the appliance.

Keep the appliance and accessories clean. Strictly follow the care and cleaning instructions described in this book.

Do not use harsh abrasive, caustic cleaners or oven cleaners when cleaning the appliance.

This appliance is for household use only. Do not use the appliance for anything other than its intended purpose as described in this book. Do not use outdoors. Do not use in moving vehicles or boats.

Do not leave the appliance unattended when in use.

This appliance is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with the appliance.

Regularly inspect the power cord, power plug and actual appliance for any damage. Do not operate if damaged in any way

or after the appliance malfunctions. Immediately cease use of the appliance and visit www.Breville.com or call Breville Customer Service at1-866-BREVILLE

for examination, repair or adjustment.

For any maintenance other than cleaning, visit www.Breville.com or call Breville Customer Service at1-866-BREVILLE.

This appliance is equipped with a power cord having a grounding wire with a grounding plug. The appliance must be grounded using a 3-holeproperly grounded outlet. In the event of an electrical short circuit, grounding reduces the risk of electrical shock.

If the appliance is of the grounded type, the extension cord should be a grounding 3-wirecord.

If the power outlet is a standard 2-prongwall outlet, it is your personal responsibility and obligation to have it replaced with a properly grounded3-prongwall outlet.

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord or use an adapter.

Consult a qualified electrician if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded.

WARNING

Always ensure the frothing disc is securely attached to the milk jug before use.

WARNING

Frothing disc is a choking hazard. Children must always be supervised and never left unattended with appliance.

WARNING

Never immerse the power base, power cord or power plug in water or allow moisture to come into contact with these parts.

4

 

5

 

 

 

Breville recommends safety first

NOTE

This product has been tested and found to comply with the limits for ISM equipment. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation.

Apart from general care and cleaning of the product, no maintenance of the radio frequency system is required. Changes or modifications to the product could void the user’s authority to operate the equipment.

If this product does cause harmful interference to radio or television reception

– which can be determined by turning the product off and on – the user is encouraged to correct the interference by one or more of the following measures:

−−Reorient or relocate the product.

−−Increase the separation between the product and the receiver.

−−Connect the product into an outlet on a circuit different from that to which the receiver is connected.

BREVILLE ASSIST™ PLUG

Your Breville appliance comes with a unique Assist™ Plug, conveniently designed with

a finger hole in the power plug for easy and safe removal from the wall outlet. For safety reasons it is recommended you plug your Breville appliance directly into its own electrical outlet on a dedicated circuit separate from other appliances. If the electric circuit is overloaded with other

appliances, your appliance may not function properly. Use in conjunction with a power strip or extension cord is not recommended.

SHORT CORD INSTRUCTIONS

Your Breville appliance is fitted with a short power supply cord as a safety precaution to prevent personal injury or property damage resulting from pulling, tripping or becoming entangled with a longer cord. Do not allow children to use or be near this appliance without close adult supervision. Longer detachable power supply cords or extension cords are not recommended but may be used if care is exercised. If an extension cord is used, (1) the marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance, (2) the cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally and (3) the extension cord must include a 3-pronggrounding plug.

FOR HOUSEHOLD USE ONLY SAVE THESE INSTRUCTIONS

KNOW

your Breville Milk Café™

6

KNOW your Breville Milk Café™

 

KNOW your Breville Milk Café™

 

 

 

A

 

B

A. Measuring Cap

 

 

 

 

 

For measuring and adding ingredients

 

 

 

once mixing has started.

 

 

B.

Jug Lid

 

 

 

With Breville Assist™ Ring-PullRemoval.

 

 

C. Dishwasher Safe Milk Jug

 

 

 

Stainless steel jug with inner measurement

 

 

 

markings and pouring spout.

 

 

D.

Power Base

C

 

 

Induction Heating Technology provides

 

 

 

gentle, even heat distribution.

 

 

E.

START | STOP Push-Dial

 

 

 

Press the center of the dial to start or

 

 

 

stop operation. Turn the dial to adjust

 

 

 

the temperature. ‘COLD STIR’ setting

 

H

 

stirs without heating.

 

 

F.

LED Indicator

 

 

 

Button surround illuminates when power

 

 

 

is on; flashes when the frothing cycle is

 

 

 

activated; or will cease to illuminate in

 

 

 

standby mode.

 

 

G. Cord Wrap

D

 

H. ‘On Board’ Disc Storage

 

 

I.

‘Cappuccino’ Frothing Disc

E

 

 

For thick and creamy froth.

 

J.

‘Latte’ Frothing Disc

 

 

F

For smooth and silky milk.

 

I

G J

8

 

9

 

 

 

OPERATING

your Breville Milk Café™

OPERATING YOUR BREVILLE Milk Café™

Before first use

Before first use, ensure you have all parts and accessories - power base, milk jug, latte disc, cappuccino disc, jug lid and measuring cap.

Remove and safely discard all promotional labels and packing materials attached to the Breville Milk Cafe™.

Wash the milk jug, frothing discs, lid and measuring cap in warm soapy water then rinse and dry thoroughly. Wipe the exterior of the power base with a soft damp cloth then dry thoroughly.

Frothing Hot Milk

CAPP LATTÉ

WIDER DISC END FACES DOWN

1.Place the milk frother on a flat level surface and plug the power cord into a 110V-120Vpower outlet. The START | STOP button surround will illuminate.

NOTE

After 30 seconds of non-use,the milk frother will enter standby mode. The button surround will cease to illuminate. To reactivate, turn or press the START | STOPpush-dial.

2. Select the‘Capp’ or‘Latté’ frothing disc.

Choose the ‘Capp’ disc for thick and creamy froth or the‘Latté’ disc for smooth and silky milk.

3.Insert the frothing disc onto the shaft at the base of the milk jug. Ensure the disc is inserted the correct way with the wider part of the disc at the bottom of the jug. The disc should ‘click’ securely onto the shaft.

NOTE

If the disc is not inserted correctly it may dislodge during operation, a grinding noise may be heard, or milk will not swirl.

Do not operate the milk frother without a frothing disc inserted into the milk jug as this can cause uneven heating and burning.

WARNING

Frothing disc is a choking hazard. Children must always be supervised and never left unattended with

the appliance.

11

OPERATING YOUR BREVILLE Milk Café™

4.Pour the required amount of cold, fresh (or freshly opened) milk into the milk jug then cover with the jug lid. Always use cold milk and fill the milk jug between the MIN and MAX level markings. Overfilling may result in spillage, while underfilling prevents the frothing disc from working optimally.

NOTE

Never operate without the minimum level of liquid in the milk jug. The milk frother will automatically turn off if the milk jug is empty. If this occurs, you will need to wait for the milk frother to cool down before re-use,refer to page 14.

MIN MAX

For optimum results, there are different measurement markings within the milk jug. The chart on the right shows the approximate number of cups produced at each of the measurement markings. This is a guide only as the frothing disc selected and the type of milk, for example whole milk (vitamin D), 2%, 1%, fat-free,half-and-halfetc., can create different amounts of froth.

JUG MARKING

FROTHING DISC

MAKES

 

 

APPROX.

 

 

 

HOT CHOC MAX

Cappuccino

3 cups

25 fl.oz (750ml)

(recommended)

 

 

OR

 

 

Latte

 

 

 

 

CAPP / LATTE MAX

Cappuccino

2-3cappuccinos

16 fl.oz (500ml)

OR

 

 

Latte

 

 

 

 

8 fl.oz (250ml)

Cappuccino

1-2cappuccinos

 

OR

 

 

Latte

 

 

 

 

MIN

Cappuccino

1 cappuccino

 

OR

 

 

Latte

 

 

 

 

NOTE

For optimum froth, do not exceed the CAPP/LATTE MAX (16 fl.oz, 500ml) measurement marking inside the milk jug.

5.Ensure the jug lid is securely attached and the outside of the milk jug is clean. Place the milk jug onto the power base, ensuring the jug is sitting flat.

6.Turn the START | STOP push-dialto the desired temperature. When frothing milk for a cappuccino or latte, we recommend staying within the ‘OPTIMUM MILK TEMP’ range, however this is up to your personal preference.

If the temperature setting is changed during operation, the milk frother will stop at the new temperature selected.

The exception is if a lower temperature is selected mid-cycleand the milk has already exceeded the lower temperature. In this case, the milk frother will immediately stop.

OPERATING YOUR BREVILLE Milk Café™

ONLY PRESS ONCE, FIRMLY

7.Only press the START | STOP push-dialonce, firmly..Frothing has started once the milk frother beeps once and the button surround slowly flashes. If the milk frother does not do this, try pushing the START | STOPpush-dialagain to ensure it has been properly activated.

NOTE

Do not remove the milk jug from the power base during operation. Doing so may dislodge the frothing disc and cause a grinding noise. Always press the center of the START | STOP push-dialbefore removing the jug.

Operation has stopped once the button surround has stopped flashing.

WARNING

Appliance surfaces will be hot during and after operation.

8.When the milk has reached the selected temperature, the milk frother will automatically stop and beep twice. This will take anywhere between 2 -7minutes depending on the quantity of milk used. Carefully remove the milk jug from the power base as the milk jug and contents will be hot. Be careful not to place the milk jug on a table cloth, plastic surface or heat sensitive surface which may scorch or melt. Remove the jug lid, pour and/or spoon out the frothed milk.

9.Clean the milk jug and frothing disc immediately after use. Both will be hot, so follow the instructions on page 17 and allow them to cool completely before disassembling.

NOTE

When frothing multiple batches, to prevent the Boil Dry Protection from activating (see page 14), we recommend allowing the milk jug

to cool for approximately 5 minutes, or filling the milk jug with water for faster cooling. For best results, we also recommend cleaning the milk jug and frothing disc before re-use.

NOTE

After frothing the first batch of milk you may notice the power base begin to hum. This is normal. It

is the cooling fan preventing the milk frother from overheating and will automatically cease to hum once adequately cooled. During this time, you may still use the milk frother unless the Boil Dry Overheat Protection as been activated

(see page 14).

USING THE ‘COLD STIR’ SETTING

The ‘Cold Stir’ setting allows you to stir already cold or hot milk without additional heat.

Use it to froth milk for cold beverages such as an iced cappuccino; to blend in syrups and flavorings for an iced chocolate or mocha; or to stir in dissolvable instant drinking powders into milk or water.

The ‘Cold Stir’ setting will operate for 60 seconds before automatically stopping. You canre-selectthe‘Cold Stir’ setting if desired.

12

 

13

 

 

 

OPERATING YOUR BREVILLE Milk Café™

NOTE

The milk frother has been designed specifically for the purpose of foaming milk and other dairy milk alternatives and is not intended to whip, thicken or heat other food substances eg. oil, eggs, butter, heavy whipping cream, soups, gravies etc.

The milk frother is not designed to mix a large quantity of dry

ingredients or melt large food pieces eg. cubed chocolate, ground nuts, whole spices, fresh herbs or ice cubes.

Adding Ingredients

Always allow the milk frother to start for a few seconds before using the measuring cap to gradually add ingredients. If using one of the heated settings, this will allow the milk to warm up and help dissolve the additional ingredients.

Always add ingredients slowly and in small quantities. Adding ingredients too quickly can cause the frothing disc to dislodge or stop spinning.

NOTE

Frothing results differ depending on the ingredients used. For example, adding dense ingredients like thick syrups, heavy powders and large flakes can significantly reduce the amount of foam.

Safety Features

Standby

After 30 seconds of non-use,the milk frother will enter standby mode. The button surround will cease to illuminate. To reactivate the milk frother out of standby mode, turn or press the START | STOPpush-dial.

Boil Dry, Overheating Protection

The milk frother will automatically cease to operate if the milk jug overheats. This can be caused if the milk jug is empty, if liquid is below the MIN measurement marking, or after consecutive uses. If this occurs, 3 alerts will sound. Unplug the power cord from the power outlet, wait approximately 5 minutes for the milk frother to cool down or fill the milk jug with water for faster cooling. Once

adequately cooled, you will be able to reactive the milk frother and recommence frothing.

Thermal Fuse & Current Protection

This feature protects the milk frother in case of major fault. If this occurs, the milk

frother will automatically turn off and will not reactivate. Immediately cease use, remove the power plug from the power outlet and visit www.Breville.com or call Breville Customer Service at 1-866-BREVILLEfor examination, repair or adjustment.

OPERATING YOUR BREVILLE Milk Café™

PREPARATION GUIDE

As a general guide, the chart below shows some suggested milks, ingredients and uses for the milk frother.

 

 

 

 

 

 

 

 

 

FRESH

COW

SOY

GOAT

SHEEP

 

 

 

MILK

Full cream

Full cream

 

 

SUITABLE

low fat, skim

& low fat

 

 

 

 

LIQUIDS

UHT

COW

SOY

GOAT/

OAT/

ALMOND

 

 

 

 

MILK

Full cream

Full cream

SHEEP

RICE

 

 

low fat, skim

& low fat

 

 

 

 

 

 

 

 

 

POWDERS/

 

 

 

 

 

 

 

DRINKING

COCOA

CHAI

CHOCOLATE

 

 

SUITABLE

FLAKES

CHOCOLATE

POWDER

TEA

FLAKES

 

 

INGREDIENTS

TOPPINGS/

CHOCOLATE

CARAMEL

CHAI

MAPLEHONEY

MAPLE

 

 

 

 

SYRUPS

TEA

 

 

 

 

 

 

 

 

HOT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HOT

CAPPUCCINO

LATTÉ

FLAT

CHAI

 

 

DRINKS

CHOCOLATE

WHITE

LATTÉ

 

RECIPES

COLD

ICED

ICED

ICED

ICED

 

 

 

 

 

 

CARAMEL

 

 

 

DRINKS

CHOCOLATE

COFFEE

MOCHA

 

 

 

LATTÉ

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

14

 

15

 

 

 

CARE & CLEANING

for your Breville Milk Café™

CARE & CLEANING FOR YOUR Breville Milk Café™

Both the milk jug and frothing disc should be cleaned immediately after each use to prevent build-upof milk residue.

1.Unplug the power cord from the power outlet before cleaning.

2.The milk jug and frothing disc will be hot immediately after use, so carefully remove the milk jug from the power base and fill with tap water. Once the milk jug and frothing disc have cooled completely, remove the frothing disc and rinse off any milk in warm water.

3.Wash the milk jug, jug lid, measuring cap and frothing disc in warm soapy water, rinse and dry thoroughly.

The seal from the lid can be removed and washed separately.

4.Wipe the exterior of the power base with a soft damp cloth. Dry thoroughly.

NOTE

Do not use alkaline or abrasive cleaning agents, steel wool or scouring pads on any part of the milk frother as these can damage the appliance surfaces.

NOTE

Never immerse the power base in water or any other liquid. The outside of the milk jug must always be clean and dry before placing on the power base prior to use.

NOTE

The milk jug, jug lid, measuring cap and frothing discs can be washed in the dishwasher (top shelf only).

However to extend the life of the frothing discs, we recommend these are washed by hand.

17

HINTS & TIPS

for your Breville Milk Café™

HINTS & TIPS FOR YOUR Breville Milk Café™

hints & tips

Always use cold, fresh (or freshly opened) milk.

Some milks and milk brands produce more froth than others. For example, we have found that some soy milks produce very airy froth, while others do not. Experiment with different milk options and frothing discs to achieve the desired result.

For optimum froth, do not exceed the CAPP/LATTE MAX (16 fl.oz, 500ml) measurement marking inside the milk jug.

Always allow the milk frother to start for a few seconds before using the measuring cap to gradually add ingredients. This will allow the milk to warm up and help dissolve the additional ingredients.

Remove excess air bubbles from frothed milk by gently tapping the milk jug on a bench.

Swirl frothed milk in a circular motion before pouring milk into a cup or glass.

Pour frothed milk promptly to avoid the milk from separating. Frothed milk that is not used immediately should not be reheated.

Ensure the milk jug and frothing disc are clean before use.

19