Conical Burr Grinder™
Instruction Booklet Livret d’instructions
BCG450XL /A
CONGRATULATIONS |
|
|
|
CONTENTS |
|
|
|
|
|
|
|
on the purchase of your new Breville Conical Burr Grinder™ |
4 |
Breville recommends safety first |
|
|
6 |
Know your Breville Conical Burr |
|
|
|
|
Grinder™ |
|
8 |
Operating your Breville Conical Burr |
|
|
|
|
Grinder™ |
|
10 |
Care & cleaning your Breville Conical |
|
|
|
|
Burr Grinder™ |
|
14 |
One year limited warranty |
|
BREVILLE RECOMMENDS SAFETY FIRST
We at Breville are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions:
Important safeguards
Read all instructions
•Carefully read all instructions before operating and save for future reference.
•To protect against electric shock, do not immerse the grinder, plug or cord in water or any other liquid.
•Remove any promotional stickers or packaging materials before using the coffee grinder for the first time.
•Do not place the appliance near the edge of a bench or table during operation. Always use the appliance on a dry, level surface.
•To turn the appliance off, remove the plug from the power outlet. Remove the plug when the appliance is not being used and before cleaning.
•The Coffee Grinder should not be switched on until the bean container and lid are locked into position in the Grinding Chamber.
•Do not leave the appliance unattended when in use.
•Do not move the grinder whilst in operation.
•Do not place this appliance on or near a hot gas or electric burner, or where it could touch a heated oven.
•Do not use on metal surfaces, for example, a sink drain board.
•Do not use on an inclined surface.
•Do not operate this appliance for longer
than 2 minutes at a time as this could cause overheating. Allow to cool for at least 2 minutes after each use. Allow appliance to cool down for 10-15 minutes after long operation.
•Keep the appliance clean. Follow the cleaning instructions provided in this book.
•Avoid contacting moving parts
•The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock or injury.
•Check Hopper for presence of foreign objects before using.
•This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.
BREVILLE RECOMMENDS SAFETY FIRST
FOR ALL ELECTRICAL APPLIANCES
•Fully unwind the cord before use.
•Do not let the cord hang over the edge of a table or counter, touch hot surfaces or become knotted.
•The appliance is not intended for use by young children or infirm persons unless they have been adequately supervised by a responsible person to ensure that they can use the appliance safely.
•Young children should be supervised to ensure that they do not play with the appliance.
•It is recommended to regularly inspect the appliance. Do not use the appliance if power supply cord, plug or actual appliance becomes damaged in any way. Return the entire appliance to the nearest authorised Breville service centre for examination and/or repair.
•This appliance is for household use only. Do not use this appliance for anything other than its intended use. Do not use in moving vehicles or boats. Do not use outdoors.
•The installation of a residual current device (safety switch) is recommended to provide additional safety protection when using electrical appliances. It is advisable that a safety switch with a rated residual operating current not exceeding 30mA be installed in the electrical circuit supplying the appliance. See your electrician for professional advice.
TO ENSURE CONTINUED PROTECTION AGAINST ELECTRIC SHOCK, CONNECT TO PROPERLY GROUNDED OUTLETS ONLY.
SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY
4 |
|
5 |
|
|
|
KNOW
your Breville Conical Burr Grinder™
KNOW YOUR BREVILLE conical burr grinder™
Bean container (removable) holds up to 5 oz of coffee beans
Stylish stainless steel design
Tidy cord storage
Non-slip feet
Bean Container Lid
with transparent window
Grind selector control
with suggested coffee style settings
Conical burr grinder
inside the Grinding Chamber
Touch activated start/stop button
Timer Selector Dial
7
OPERATING
your Breville Conical Burr Grinder™
OPERATING YOUR BREVILLE conical burr Grinder ™
Before first use
Before first use, remove any promotional stickers or packaging material attached to your coffee grinder.
1.Remove the Bean Container, Bean Container Lid and Ground Coffee Container and wash in warm soapy water with a soft cloth. Rinse and dry thoroughly. Before each use, ensure Grinding Chamber and Ground Coffee Container are clean and empty.
2.Remove the Burr Grinder inside the Grinding Chamber by gripping the small inner black plastic frame and pulling out the top ring.
3.Using a soft cloth, wipe off any excess protecting oil from the Burr Grinder and place it back into the Grinding Chamber.
4.Place the Bean Container into the Grinding Chamber so the ‘ALIGN’ arrow on the Bean Container aligns with the ‘ALIGN’ arrow on top left-hand side of the Grinder. Turn the Bean Container clockwise to lock into position.
5.Measure the desired quantity of whole coffee beans or spices directly into the Bean Container and cover with Bean Container lid.
6.Plug the Grinder into a 110v power outlet.
7.To select the desired fineness of grind, rotate the Bean Container and align the white marker on the front panel of the Grinder with one of the following settings:
COARSE |
– Percolator |
MEDIUM |
– French Press |
FINE |
– Filter |
EXTRA FINE |
– Espresso |
SUPER FINE |
– Turkish |
NOTE:
In order to remove any excess protecting oils from the Burr Grinder, it is necessary to grind 1.75 oz (50g) of coffee beans on the Super Fine (Turkish) setting. Discard this initial ground coffee.
8.Rotate the Timer Selector Dial to select the desired grinding time.
9.Press the ‘START’ button on the front of the Grinder to begin grinding. The Coffee Grinder will begin grinding
the coffee/spices directly into the Ground Coffee Container and will stop automatically when grinding is complete. To stop the grinding cycle at any time, push the ‘START’ button again. If the ‘START’ button is pressed again, the grinder will start from the beginning of the timed cycle.
10.Remove the plug from the power outlet.
11.Gently tap the side of the Grinder, above the Ground Coffee Container, so that any grinds remaining in the release chute are released into the Ground Coffee Container.
12.Remove the Bean Container, Bean Container Lid and Ground Coffee Container and wash in warm soapy water with a soft cloth. Rinse and dry thoroughly.
13.Wipe the Grinding Chamber with a soft dry cloth and replace the Bean Container, Bean Container Lid and Ground Coffee Container back into position.
14.Rewind the power cord into the cord storage area located under the Grinder base.
9
Loading...