Breville 800BLXL -B User Manual

Size:
741.67 Kb
Download

Die-CastHemisphere Blender™

Instruction Booklet Livret d’instructions

800BLXL /B

CONGRATULATIONS CONTENTS

On the purchase of your new Breville Die-Cast

Hemisphere Blender

4 Breville recommends safety fi rst

6Know your Breville Die-CastHemisphere Blender™

8Operating your Breville Die-CastHemisphere Blender™

14Cleaning your Breville Die-CastHemisphere Blender™

16Blending Chart

17Do's and don'ts

19Troubleshooting

20One year limited warranty

2

BREVILLE RECOMMENDS SAFETY FIRST

IMPORTANT SAFEGUARDS

We at Breville are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer, foremost in mind. In addition, we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions:

READ ALL INSTRUCTIONS BEFORE USE

AND SAVE FOR FUTURE REFERENCE

Carefully read all instructions before operation and save for future reference.

Remove any packaging material and promotional labels before using the Breville Die Cast Hemisphere Blender™ for the fi rst time.

To protect against electrical shock, do not immerse cord, plug or motor base in water or any other liquid.

Always use the appliance on a dry, level surface.

The use of attachments not sold or recommended by the manufacturer may cause fi re, electric shock or injury.

Do not remove the blender pitcher from the motor base while blender is in operation.

Do not place hands in pitcher unless the unit is disconnected from the power outlet. A scraper may be used but must be used only when the blender is not running.

Disconnect the blender from the power outlet before removing pitcher from base. Blades are sharp - handle carefully.

To reduce risk of injury, never place blade assembly on base without jar properly attached.

Always operate the blender with cover in place.

Do not use this blender for any purpose other than food or beverage preparation.

Do not blend a dry, thick or heavy mixture for more than 10 seconds without turning the blender off. Then, stir ingredients before continuing to blend.

Do not process boiling liquids. Let cool before placing in pitcher.

Do not leave the appliance unattended when in use. Young children should be supervised when near the appliance.

Do not allow cord to hang over the edge of a table or counter, touch hot surfaces, or become knotted.

Do not place appliance on or near a hot gas or electric burner, or where it could touch any other source of heat.

Unplug appliance from the power outlet when not is use, before putting on or taking off parts, and before cleaning.

This appliance is for household use only. Do not use this appliance for anything other than its intended use. Do not use outdoors.

This appliance has a polarized plug. To reduce the risk of electric shock, this plug will fi t in a polarized outlet only one way. If the plug does not fi t fully into the outlet, reverse the plug. If it still does not fi t, contact a qualifi ed electrician. Do not modify the plug in any way.

BREVILLE RECOMMENDS SAFETY FIRST

FOR ALL ELECTRICAL APPLIANCES

Fully unwind the cord before use.

To protect against electric shock, do not immerse the cord, plug or motor base in water or any other liquid.

Do not allow the cord to hang over the edge of a table or counter, touch hot surfaces or become knotted.

This appliance is not intended for use by young children or infi rm persons unless they have been adequately supervised by a responsible person to ensure they can use the appliance safely.

Young children should be supervised to ensure that they do not play with the appliance.

It is recommended to regularly inspect the appliance. Do not use the appliance if the power supply cord, plug or appliance becomes damaged in any way. Return the entire appliance to the nearest authorized Breville Service Center for examination and/or repair.

Any maintenance other than cleaning should be performed at an authorized Breville Service Center.

SAVE THESE INSTRUCTIONS

This appliance is for household use only. Do not use this appliance for anything other than its intended use. Do not use in moving vehicles or boats. Do not

use outdoors.

4

 

5

 

 

 

KNOW

your Breville Die-CastHemiphere Blender™

KNOW YOUR BREVILLE DIE-CASTHEMISPHERE BLENDER™

BPA Free 2L Jug

Constructed from heavy-dutyBPA Free Copolyester materials, provides optimal toughness with commercial volume and style. The professional grade, shatter resistant jug is remarkably strong and lightweight.

Intelligent

Engineering

High torque, powerful motor, highly efficient blades and precision engineered

components allow the blender to operate at speeds up to half as fast as other blenders. Lower speeds mean quieter operation and a longer lasting motor.

Hemisphere™ System

Revolutionary blade technology with extra wide blades which hug the bowl to eliminate food being trapped. The serrated blades are engineered from surgical grade stainless steel for durability that ensures the blade stays sharp.

*Due to continued product improvement, the products illustrated/photographed in this brochure may vary slightly from the actual product.

Breville Assist™ Lid

Reliable leak free lid with one finger leverage removal ensures the lid is sealed tight during operation yet simple to remove.

Easy Clean, Dishwasher Safe

Intelligent design means easy to clean surfaces and fewer components that dismantle in seconds and are dishwasher safe.

Die-CastDesign

Bold design with professional grade die-castsurfaces for durability

and long lasting performance.

Speed Control

Pre-programmedelectronic settings automatically alter speeds to optimize blending results.

Capped buttons illuminate for clarity when selected.

Blade Removal

The one piece blade removal system

is ergonomically designed for ease of cleaning.

6

 

7

 

 

 

OPERATING

your Breville Die-CastHemiphere Blender™

OPERATING YOUR BREVILLE DIE-CASTHEMISPHERE BLENDER™

Before first use

Before using your Breville Die-CastHemisphere Blender™ for the fi rst time, remove any packaging material and promotional labels. Ensure the appliance is switched off at the power outlet and the power cord is unplugged.

Wash the lid, inner lid, blender jug and blade assembly (refer to Disassembling the blender on page 12) of the Breville Die-CastHemisphere Blender™ in warm, soapy water with a soft cloth.

Rinse and dry thoroughly. Do not place parts in the dishwasher (with the exception of the blender jug, lid and inner lid). The blender jug, lid and inner lid may be washed in the dishwasher.

Ensure the blade assembly has been removed from the blender jug before placing the blender into the dishwasher. The motor base can be wiped with a damp cloth.

Dry thoroughly.

Assembling the Blender

1.To assemble the blender jug, place the silicon seal onto the blade assembly.

2.Upturn the blender jug and insert the blade assembly into the jug base.

8

 

9

 

 

 

OPERATING YOUR BREVILLE DIE-CASTHEMISPHERE BLENDER™

3.Twist the Blade Removal System counterclockwise until fi rmly screwed into position.

4.Place the motor base on a fl at, dry surface such as a bench top. Ensure that the motor base is switched off at the power outlet and the power cord is unplugged. Turn the blender jug

upright and insert on to the motor base. The handle of the blender jug can be positioned to the left or right hand side of the appliance.

Using the blender

1.To turn the blender on press the ‘Power’ button on the far left of the control panel. The ‘Power’ button will illuminate and

fl ash indicating the blender is powered on. When the jug is placed on the base all lights will illuminate signalling the blender is ready for use.

NOTE:

When using your Breville Die-CastHemisphere Blender™ for the first time, you may notice an odor coming from the motor. This is normal and will dissipate with use.

2.Add food or liquid into the blender jug ensuring not to exceed the ‘MAX’ mark.

3.Place the blender lid fi rmly into position on the top of the blender jug. If not already in place, insert the clear inner lid into the blender lid and turn clockwise or counterclockwise to lock into position.

5.Plug the power cord into a 110/120v power outlet.

OPERATING YOUR BREVILLE DIE-CASTHEMISPHERE BLENDER™

NOTE:

When the blender jug is filled at or near the ‘MAX’ line, place one hand on the blender lid to avoid displacement of the lid during operation. Do not blend hot ingredients, allow to cool before placing into the blender jug.

NOTE:

Operate the blender only for the appropriate amount of time

required. The Die-CastHemisphere Blender™ will automatically stop blending on the Blend function and on the Smoothie and Ice/Auto Pulse functions to avoid over processing.

The Breville Die-CastHemisphere Blender™ features a patent pending assist lid. This allows the lid to fi t tightly onto the blender jug, avoiding displacement during operation. The ring pull design allows the user to easily remove the lid with a simple leverage action.

The speed can be changed at any time during the blending process. Each time a new speed is selected its button will illuminate and the previous speed button illumination will go out.

5.For ice-crushingor ingredients that require short bursts of power, select the Ice/Auto Pulse button. The blender will start to operate and the Ice/Auto Pulse button will illuminate.

The 'Power' button will continue to fl ash. The pre-programmedfunctions have been designed to run for a specifi c time.

Function

Programmed Time

 

 

Blend

60 Seconds (1 minute)

 

 

Smoothie

60 Seconds (1 minute)

 

 

Ice/Auto Pulse

60 Seconds (1 minute)

 

 

4.Select the required speed (Blend, Smoothie or Ice/Auto Pulse) by pressing the corresponding speed button. The blender will start to operate and only the selected speed button will illuminate. The ‘Power’ button will continue to fl ash.

NOTE:

The smoothie function has a unique processing technique that blends the denser ingredients at a lower speed, then increases as ingredients thicken. This may happen several times while blending smoothies.

6.To stop blending at any time, press the selected speed button. The ‘Power’ button can also be pressed.

10

 

11

 

 

 

OPERATING YOUR BREVILLE DIE-CASTHEMISPHERE BLENDER™

 

OPERATING YOUR BREVILLE DIE-CASTHEMISPHERE BLENDER™

 

 

 

7.At the end of use, always ensure the Breville Die Cast Hemisphere Blender is turned off by pressing the ‘Power’ button on the control panel. Then unplug the cord. Ensure the motor and blades have completely stopped before attempting to move the appliance, or when the Breville Die-CastHemisphere Blender™ is not in use and before disassembling, cleaning and storing.

NOTE:

During the blending process, ingredients may stick to the sides of the blender jug. To push the food back onto the blades, press the ‘Power’ button on the control panel and remove the power cord.

Remove the lid and use a plastic spatula to scrape down the sides of the jug. Replace the lid before recommencing blending.

NOTE:

If the blades become stuck, the blender will automatically turn off. To reset, turn the blender off at the power outlet, clean the jug and blades with a spatula and then turn back on. The blender will be reset.

If any moisture or liquid appears on top of the motor base during blending, press the ‘Power’ button on the control panel, and remove the power plug. Remove the blender jug. Wipe the motor base immediately with a dry cloth or paper towelling to absorb the liquid. Check the blender jug is correctly assembled.

NOTE:

The Die-CastHemisphere Blender™ features a motor overload protection feature. If the motor is being overloaded, the motor will stop and the key LED's will illuminate and flash. To restart the blender again, unplug from the mains let it cool down for 30 minutes or longer.

Dissassembling the blender

1.Always ensure the Breville Die-CastHemisphere Blender™ is switched off by pressing the ‘Power’ button on the control panel. Then unplug the power cord.

2.Remove the blender jug from the motor base by grasping the handle and lifting the jug in an upward direction. Remove the blade assembly by upturning the blender jug and twisting the Blade Removal System clockwise, then lift upwards and away from the base of the blender.

3.Remove the silicon seal from the blade assembly.

12

 

13

 

 

 

CLEANING

your Breville Die-CastHemiphere Blender™

CLEANING YOUR BREVILLE DIE-CASTHEMISPHERE BLENDER™

Cleaning the motor base

1.Wipe the motor base with a soft, damp cloth then dry thoroughly.

2.Wipe any excess food particles from the power cord.

NOTE:

Do not use abrasive scouring pads or cleaners when cleaning the parts or motor base as they may scratch the surface.

Cleaning the blender jug, lid, inner lid and blade assembly

1.Wash all parts in warm soapy water with a soft cloth. Use a kitchen bottle brush to dislodge stubborn foods. Rinse and dry thoroughly.

NOTE:

The blender jug, lid and inner lid can be washed in the dishwasher on a standard wash setting. Ensure the blade assembly has been removed from the blender jug before placing the blender into the dishwasher.

NOTE:

It is recommended that you periodically fill the jug 1/3 full with warm soapy water and run a blending cycle to help clean and dislodge any buildup in the blade assembly.

Removing stubborn or strong food stains and odors

Strong smelling foods such as garlic, fi sh and some vegetables such as carrots may leave an odor or stain on the blender jug and lid. To remove, soak blender jug and lid for 5 minutes in warm soapy water. Then wash with a mild detergent and warm water, rinse well and dry thoroughly.

Storage

Store your Breville Die-CastHemisphere Blender™ upright with the blender jug, lid and inner lid assembled and inserted on the motor base or beside it. Do not place anything on top.

NOTE:

The blending blades are extremely sharp. Avoid any contact with fingers and hands. Use caution when handling and storing.

NOTE:

The blender jug is made from BPA Free Copolyester materials.

14

 

15

 

 

 

BLENDING CHART

Food

Preparation & Usage

Quantity

Function

Time

 

 

 

 

 

Lean meat/

Trim excess fat and sinew,

9 oz

Blend or Auto

10-20secs

poultry

cut into ¾ in cubes.

 

Pulse

 

 

Use: Mince

 

 

 

 

 

 

 

 

Fish/seafood

Remove skin and bones and

10½ oz

Blend or Auto

10-15secs

 

cut into ¾ in cubes.

 

Pulse

 

 

Use: Mince

 

 

 

 

 

 

 

 

Raw veg.

Peel and cut into ¾ in cubes.

7 oz

Blend or Auto

10-30secs

 

Use: Stuffi ng, fi llings, puree,

 

Pulse

 

 

 

 

 

 

soup

 

 

 

 

 

 

 

 

Nuts

Remove shells.

7 oz

Auto Pulse

10-30secs

 

Use: Cakes, toppings,

 

 

 

 

pastes

 

 

 

 

 

 

 

 

Bread or biscuit

Cut bread into ¾ in pieces,

3½ oz

Auto Pulse

10-30secs

crumbs

break up biscuits.

 

 

 

 

Use: Cheesecake crust

 

 

 

 

 

 

 

 

Mayonnaise

Mix the egg yolk and vinegar.

4½ oz

Blend

10-15secs

 

Add the oil.

 

 

then

 

Use: Dressings

 

 

30-60secs

 

 

 

 

 

 

 

 

 

Whipped

Add sugar or vanilla if desired

10 fl oz

Blend/Auto

10 secs

cream

Use: Topping

 

Pulse

1-2times

 

 

 

 

 

 

 

 

 

Herbs/spices

Whole or halved

1 cup

Blend or Auto

20-30secs

 

Use: Pastes, sauces

 

Pulse

 

 

 

 

 

 

 

 

 

 

Smoothie

Milk, whole fresh fruits,

Max

Smoothie

20-60secs

 

yoghurt, ice cream

27 fl oz

 

 

 

Use: Milkshakes, frappes

 

 

 

 

 

 

 

 

Fresh fruit

Whole, chopped berries.

9 oz

Blend

20-30secs

 

Use: Dessert sauce

 

 

 

 

 

 

 

 

Dried fruit

Chopped dry fruit.

10½ oz

Auto Pulse

20-30secs

 

Use: Fruit mince

 

 

 

 

 

 

 

 

Ice

Crush

9 oz

Ice/Auto Pulse

10-20secs

 

Use: Mixed drinks, cocktails

 

 

 

 

 

 

 

 

NOTE:

This blending chart should be used as a guide only.

DO'S AND DON'TS

Do’s

Use the Blend function for for drinks or cocktail making, emulsions such as mayonnaise, dressings, marinades and foods that require mixing until just combined, such as batters, also for pureeing soups and aerating liquids.

Use a combination of the Blend and Ice/ Auto Pulse functions to suit the foods being processed.

Use the Smoothie function to blend fruits, ice cream and yoghurts into thick smoothies, whips and milkshakes.

Use the Ice/Auto Pulse function for foods that only require short bursts of power such as chopping nuts and crushing ice.

Use the Ice/Auto Pulse function with short bursts of power, when blending drinks containing ice cubes or frozen fruit.

Ensure all foods are cut into cubes (approx. 1 inch square) where appropriate to achieve an even result.

Do not put more than 2 cups of warm ingredients into the Breville Die-CastHemisphere Blender™ before blending commences. After the blending process has begun and the blades are turning you may slowly add another 1½ cups of ingredients through the opening in the lid if desired.

Thick mixtures puree more effi ciently if the Breville Die-CastHemisphere Blender™ is ¼ to ½ full.

When using several ingredients, place liquid ingredients in the blender jug before solid ingredients, unless specifi ed in the recipe. When blending thick or dry mixtures it may be necessary to stop the Breville Die Cast Hemisphere Blender™ and scrape down the sides of

the blender jug with a plastic or rubber spatula, once or twice during blending. Do not use metal utensils as they may damage the blades or blender.

Don’t

Do not operate a heavy mixture for more than 10 seconds. For normal

blending tasks, for example, mayonnaise, dressings etc., do not operate for

longer than 2 minutes at one time without turning off the Breville Die-CastHemisphere Blender™ and stirring the ingredients, and then continue blending.

Do not operate the Breville DiCast Hemisphere Blender™ without having the blender lid in position. To add additional ingredients whilst blending, remove the inner lid and place ingredients through the opening in the lid.

Do not place any objects, other than food or liquid, into the Breville Die-CastHemisphere Blender™ whilst the motor is running.

Do not use the blender jug to store food.

The blender will not knead dough or mash potatoes.

Do not remove the blender jug while the Breville Die-CastHemisphere Blender™ is operating. Always make sure the blender is switched off by pressing the ‘Power’ button, switch off the power at the power outlet and unplug the power cord from the power outlet.

Do not overload the Breville Die-CastHemisphere Blender™ with more than the specifi ed quantity of ingredients as doing so could cause the motor to stall. Turn the Breville Die Cast Hemisphere Blender off by pressing the ‘Power’ button on the control panel, switch

off the power at the power outlet and

16

 

17

 

 

 

DO'S AND DON'TS

unplug the cord. Remove a portion of the mixture from the blender jug before continuing.

Do not place hot or boiling ingredients into the Breville Die-CastHemisphere Blender™; allow to cool before placing into the blender jug.

Do not place the Breville Die-CastHemisphere Blender™ near the edge of a bench or table during operation.

Ensure that the surface is level, clean and free of water, fl our and other substances. Vibration during operation may cause the appliance to move.

TROUBLESHOOTING

POSSIBLE PROBLEM

EASY SOLUTION

 

 

 

Check that the blender jug and lid are securely

 

locked into position.

 

Check that the blade assembly is correctly

Motor doesn’t start or

attached to the base of the blender jug.

 

blade doesn’t rotate

Check that the ‘Power’ button and selected

 

 

function or speed setting is illuminated.

 

Check that the power plug is securely inserted

 

into the power outlet and switched on

 

 

 

Either too much food is being blended at one time

 

or the pieces are too large.

Food is unevenly

Try cutting food into smaller pieces of even size

chopped

and processing a smaller amount per batch.

 

For best results, the food should be chopped into

 

pieces no larger than ¾ inch.

 

 

Food is chopped too

The food is over processed. Try using the Auto

fine or is watery

Pulse function or process for a shorter time.

 

 

Food sticks to blades

The mixture may be too thick. Try adding more

and jug

liquid to the mixture and/or use another function.

 

 

LEDs start to flash and

The motor is being overloaded. Unplug the

blender from the power outlet and wait 30

buttons do not respond

minutes or longer.

 

 

 

18

 

19