Bradford-White SW-2-65-L User Manual

Size:
473.48 Kb
Download

Residential PowerStor® SeriesSingle-Wall

Energy Saver Indirect Water Heater

The PowerStor® SeriesSingle-WallModels feature:

Heat Exchanger—Single-Wall112" O.D. glass coated (Vitraglas®) carbon steel coil. The coil has a heat transfer area of 14.2 sq. ft. and a stored water volume of 2.7 Gal. Maximum supply temperature from the boiler must not exceed 250° F.

Factory Installed Hydrojet® Total PerformanceSystem—Cold water inlet sediment reducing device helps prevent sediment build up in tank. Increases first hour delivery of hot water while minimizing temperature build up in tank.

Vitraglas® Lining—BradfordWhite water heater tanks are protected from the corrosive effects of hot water by an exclusive ceramicporcelain-likecoating. The Bradford White high silica Vitraglas® lining provides a tough interior surface for our hot water tanks.

Immersed Adjustable Honeywell Aquastat—Fast acting immersion aquastat for automatic temperature control (adjustable from 80°F to 160°F).

Supply and Return Connections—1"NPT female connections are located on the front for both the boiler collector supply and return.

2" Non-CFC Foam Insulation—Coversthe side and top of tank, reducing the amount of heat loss. This results in less energy consumption, improved operation efficiencies and jacket rigidity.

Potable Water Connections—3⁄4"NPT factory installed true dielectric fittings extend water heater life and eases installation.

Three Protective Aluminum Anode Rods—Provide added protection against corrosion for long trouble-free service.

Steel Tank—Heavygauge steel automatically formed, rolled and welded to assure a continuous seam for glass lining.

T&P Relief Valve—Included.

Brass Drain Valve.

I=B=R Certified—Thesewater heaters are rated by the Institute of Boiler and Radiation Manufacturers (I=B=R) to provide accurate performance data within the standards of the certification. The I=B=R rating is issued by the Hydronics Institute Division of GAMA and provide a recognized standard for proper comparison of hydronic appliances.

Photo is of

SW-2-65-L

Limited Lifetime Tank and Heat Exchanger Warranties / 6-YearLimited Warranty on Component Parts.

For more information on warranty, please visit www.bradfordwhite.com

For products installed in USA, Canada and Puerto Rico. Some states do not allow limitations on warranties. See complete copy of the warranty included with the heater.

MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 7,063,133 B2; 5,954,492; 5,761,379; 5,943,984; 5,081,696; 5,988,117; 6,142,216; 5,199,385; 5,574,822; 5,372,185; 5,485,879; 5,277,171; (B1)5,341,770; 5,660,165; 5,596,952; 5,682,666; 4,904,428; 5,023,031; 5,000,893; 4,669,448; 4,829,983; 4,808,356; 5,115,767; 5,092,519; 5,052,346; 4,416,222; 4,628,184; 4,861,968; 4,672,919; Re. 34,534. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 1,272,914; 1,280,043; 1,289,832; 2,045,862; 2,112,515; 2,108,186; 2,107,012; 2,092,105.

Vitraglas® and Hydrojet® are registered trademarks of Bradford White® Corporation.

554-B-0508-A

Residential PowerStor® Indirect Water Heater

Single Wall Energy Saver Models

Meet or exceed ASHRAE 90.1b (current standard)

Model

Capacity

A

B

C

D

E

F

G

Approx.

 

 

Floor to

Jacket

Floor to

Floor to

Floor to

Floor to

Floor to

Shipping

Number

 

 

 

 

Heater

Dia.

T&P

Water

Exchanger

Exchanger

Aquastat

Weight

 

 

 

 

U.S. Imp.

Top

 

Conn.

Conn.

Outlet

Inlet

 

 

 

 

 

 

 

 

 

 

 

 

Gal.

Gal.

in.

in.

in.

in.

in.

in.

in.

lbs.

SW-2-30-L

30

25

335/8

22

281/4

343/8

53/8

271/2

111/2

140

SW-2-40R-L

38

32

411/8

22

343/8

417/8

53/8

271/2

111/2

172

SW-2-50R-L

48

40

461/4

22

401/8

47

53/8

271/2

111/2

180

SW-2-65-L

60

50

591/4

22

531/8

60

53/8

271/2

111/2

196

SW-2-80-L

75

62

59

24

527/8

593/4

53/8

271/2

111/2

224

SW-2-120-L

116

97

621/2

281/4

553/4

631/4

63/8

281/2

111/2

355

 

 

 

 

 

 

 

 

 

 

 

Model

Capacity

A

B

C

D

E

F

G

Approx.

 

 

Floor to

Jacket

Floor to

Floor to

Floor to

Floor to

Floor to

Shipping

Number

 

 

 

 

Heater

Dia.

T&P

Water

Exchanger

Exchanger

Aquastat

Weight

 

 

 

 

 

 

Top

 

Conn.

Conn.

Outlet

Inlet

 

 

 

Liters

mm.

mm.

mm.

mm.

mm.

mm.

mm.

kg.

SW-2-30-L

114

854

559

718

873

137

699

292

64

SW-2-40R-L

143

914

559

873

1064

137

699

292

77

SW-2-50R-L

182

1175

559

1019

1194

137

699

292

82

SW-2-65-L

227

1505

559

1349

1524

137

699

292

89

SW-2-80-L

284

1499

610

1343

1518

137

699

292

102

SW-2-120-L

439

1588

718

1416

1607

162

720

292

161

DOE Water Heater Performance

 

 

 

POTABLE

 

 

CONNECTIONS

 

 

 

(TYPICAL)

ANODE RODS

 

 

(TYPICAL)

 

 

 

 

 

B

 

B

 

 

 

 

 

DA

 

 

 

C

DA

F

C

F

 

 

G

 

G

 

E

 

E

General

All units are certified at 300 PSI (2068 kPa) test pressure

 

Maximum First

Continuous

Approximate

Model

Hour Rating

Draw Rating

Boiler Output

Number

(Gal.) @

(Gal./Min.) @

Needed for

 

140°F

115°F

140°F

115°F

Ratings (BTU/Hr.)

SW-2-30-L

279

429

4.2

6.7

220,000

SW-2-40R-L

288

438

4.2

6.7

220,000

SW-2-50R-L

297

447

4.2

6.7

220,000

SW-2-65-L

306

456

4.2

6.7

220,000

SW-2-80-L

321

470

4.2

6.7

220,000

SW-2-120-L

357

507

4.2

6.7

220,000

Based on 200°F boiler water temperature and 50°F potable water inlet.

I=B=R Water Heater Ratings

 

First Hour

Continuous

Standby

Minimum

Minimum

Model

Delivery

Draw Rating

Heat Loss

Output Rate

Heat Source

@ 135°F

@ 135°F

Rating

of Heat Source

Flow Rate

Number

(Gal.)

(Gal./Hr.)

(°F/Hr.)

(BTU/Hr.)

(Gal./Min.)

SW-2-30-L

255

235

1.2

157,000

13.7

SW-2-40R-L

260

235

1.1

157,000

13.7

SW-2-50R-L

265

235

0.9

157,000

13.7

SW-2-65-L

275

235

0.8

157,000

13.7

SW-2-80-L

295

235

0.6

157,000

13.7

SW-2-120-L

315

235

0.4

157,000

13.7

These certified ratings were obtained with a heat source output rate and flow rate as specified and a 180°F boiler water supply temperature. Other results will be obtained under different conditions.

and 150 PSI (1034 kPa) working pressure. All potable water connections are 3/4" (19mm) NPT on 8" (203mm) centers.

Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.

Suitable for Water (Potable) Heating and Space Heating.

Toxic chemicals, such as those used for boiler treatment, shall NEVER be introduced into the potable side of this system. The potable side may NEVER be connected to any existing heating system or component(s) previously used with a non-potablewater heating appliance.

Ambler, PA

For U.S. and Canada field service, contact your professional installer or local Bradford White sales representative.

Sales 800-523-2931Fax 215-641-1670 / Technical Support 800-334-3393Fax 269-795-1089Warranty 800-531-2111Fax 269-795-1089International:Telephone 215-641-9400Telefax 215-641-9750 /www.bradfordwhite.com

Sales / Technical Support 866-690-0961 / 905-238-0100Fax 905-238-0105 / www.bradfordwhite.com

©2008, Bradford White Corporation. All rights reserved.

 

 

554-B-0508-A

Printed in U.S.A.