Bradford-White 65T-65FB-3N User Manual

Size:
382.86 Kb
Download

Light Duty Commercial Atmospheric Vent

Energy Saver Gas Water Heater

Photo is of 65T-65FB-3N

The Light Duty FVIR Defender Safety System® Models Feature:

Advanced ScreenLok® Technology Flame ArrestorDesign—Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater.

Resettable Thermal Switch—Provenand reliable bimetallic switch prevents burner and pilot operation in case of ongoing flammable vapor burn inside of the combustion chamber or restricted air flow.

Piezo Igniter—Easyand quick lighting of the pilot burner by push button.

Pedestal Base—Ruggedand durable base allows easy transport, positioning, and provides corrosion resistant contact with floor.

Maintenance Free—Noregular cleaning of air inlet openings or flame arrestor is required under normal conditions.

Sight Window—Offersa view into the combustion chamber to observe the operation of the pilot and burner.

Factory installed Hydrojet® Total PerformanceSystem—Cold water inlet sediment reducing device helps prevent sediment build up in tank. Increases first hour delivery of hot water while minimizing temperature build up in tank.

Vitraglas® Lining—BradfordWhite water heater tanks are protected from the corrosive effects of hot water by an exclusive ceramicporcelain-likecoating. The Bradford White high silica Vitraglas® lining provides a tough interior surface for our water heater tanks.

Precise Temperature Control—Adjustablethermostat to any temperature up to 180°F. Anauto-resetEnergyCut-Off(ECO) shuts off all gas in the event of an overheat condition (Not recommended for 180°F sanitizing).

Side Connections—3/4"NPT tappings allow easy connections for space heating applications (potable water only).

2" Non-CFC Foam Insulation—Coversthe sides and top of tank, reducing the amount of heat loss. This results in less energy consumption, improved operation efficiencies and jacket rigidity.

Water Connections—3/4"NPT factory installed true dielectric fittings extend water heater life and eases installation.

Factory Installed Heat Traps—Designincorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation.

Protective Magnesium Anode Rod—Provides added protection against corrosion for long trouble free service.

“Snap Lock” Draft Diverter.

Flue Baffle—Maximizesthe amount of heat absorbed by the tank and reduces heat loss during standby periods.

Steel Tank—Heavygauge steel automatically formed, rolled and welded.

T&P Relief Valve—Installed.

Brass Drain Valve.

Design Certified by CSA International (formerly AGA/CGA).

3 or 5-YearLimited Tank Warranties /1-YearLimited Warranty on Component Parts.

For more information on warranty, please visit www.bradfordwhite.com

For products installed in USA, Canada and Puerto Rico. Some states do not allow limitations on warranties. See complete copy of the warranty included with the heater.

MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,954,492; 5,761,379; 5,943,984; 5,081,696; 5,988,117; 6,142,216; 5,199,385; 5,574,822; 5,372,185; 5,485,879; 5,277,171; (B1)5,341,770; 5,660,165; 5,596,952; 5,682,666; 4,904,428; 5,023,031; 5,000,893; 4,669,448; 4,829,983; 4,808,356; 5,115,767; 5,092,519; 5,052,346; 4,416,222; 4,628,184; 4,861,968; 4,672,919; Re. 34,534;

7,270,087 B2. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 1,272,914; 1,280,043; 1,289,832; 2,045,862; 2,112,515; 2,108,186; 2,107,012; 2,092,105; 2,409,271.

Defender Safety System®, ScreenLok®, Vitraglas® and Hydrojet® are registered trademarks of Bradford White® Corporation.

700-B1008

Commercial Atmospheric Vent Gas Water Heater

Light Duty Energy Saver Models

 

 

 

 

 

Meet or exceed ASHRAE 90.1b (current standard) C.E.C. Listed

NATURAL GAS AND LIQUID PROPANE GAS

 

 

 

 

 

 

 

80% Thermal Efficiency

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Model

Capacity

 

 

 

Recovery at

 

A

B

C

D

E

F

G

H

K

Approx.

 

 

 

 

 

 

100°F Rise*

 

Floor to

Jacket

V

Floor to

Floor to

Floor to

Floor to

Floor to

Depth

Shipping

 

Number

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Flue

Dia.

Size

T&P

Gas

Space

Space

Water

 

Weight

 

 

 

 

Nat.

LP

Nat.

Nat.

LP

LP

 

 

 

 

 

Conn.

 

 

Conn.

Conn.

Htg.

Htg.

Conn.

 

 

 

 

U.S. Imp.

BTU/H

BTU/H

U.S.

Imp.

U.S.

Imp.

 

 

 

 

 

Return

Outlet

 

 

 

 

 

Gal. Gal.

Input

Input

GPH

GPH

GPH

GPH

in.

in.

in.

in.

in.

in.

in.

in.

in.

lbs.

50

 

48

40

65,000

61,000

63

53

59

49

591/4

22

4

50

13

131/2

50

57

26

164

65

 

65

54

65,000

63,000

63

53

61

51

63

24

4

531/2

123/16

131/2

531/2

603/4

28

205

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Model

Capacity

 

 

 

Recovery at

 

A

B

C

D

E

F

G

H

K

Approx.

 

 

 

 

 

 

56°C Rise*

 

Floor to

Jacket

V

Floor to

Floor to

Floor to

Floor to

Floor to

Depth

Shipping

 

Number

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Flue

Dia.

Size

T&P

Gas

Space

Space

Water

 

W

 

 

 

 

Nat.

LP

 

Nat.

LP

 

 

 

 

 

 

Conn.

 

 

Conn.

Conn.

Htg.

Htg.

Conn.

 

 

 

 

Liters

kW

kW

Liters/

Liters/

 

 

 

 

 

Return

Outlet

 

 

 

 

 

Input

Input

 

Hour

Hour

mm.

mm.

mm.

mm.

mm.

mm.

mm.

mm.

mm.

kg.

50

 

182

19.1

17.9

 

238

223

1550

559

102

1270

330

343

1270

1448

660

74

65

 

246

19.1

18.4

 

238

231

1600

609

102

1359

309

342

1359

1543

711

93

Propane models feature a Titanium Stainless Steel propane burner. For 5 year models, change suffix “3” to “5”.

*Based on manufacturers rated recovery efficiency. NSF kits available.

For Propane (LP) models change suffix "B" to "S" and "N" to"X".

 

 

C

B

 

 

K

 

 

H

 

A

 

 

D&G

 

E

F

 

 

Meets NAECA Requirements

General

All gas water heaters are certified at 300 PSI test pressure (2068 kPa) and 150 PSI working pressure (1034 kPa). All potable water connections are 3⁄4" NPT (19mm) on 8" (203mm) centers. All gas connections 1⁄2" (13mm).

All models design certified by CSA International (formerly AGA/CGA),ANSI standard Z-21.10.1and peak performance rated.

Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.

Suitable for Water (Potable) Heating and Space Heating.

Toxic chemicals, such as those used for boiler treatment, shall NEVER be introduced into this system. This unit may NEVER be connected to any existing heating system or component(s) previously used with a non-potablewater heating appliance.

Ambler, PA

For U.S. and Canada field service, contact your professional installer or local Bradford White sales representative.

Sales 800-523-2931Fax 215-641-1670 / Technical Support 800-334-3393Fax 269-795-1089Warranty 800-531-2111Fax 269-795-1089International:Telephone 215-641-9400Telefax 215-641-9750 /www.bradfordwhite.com

Sales / Technical Support 866-690-0961 / 905-238-0100Fax 905-238-0105 / www.bradfordwhite.com

©2008, Bradford White Corporation. All rights reserved.

 

 

700-B1008

Printed in U.S.A.