Bradford-White 105-B User Manual

Size:
266.14 Kb
Download

EFFICIENCY

RATING

CERTIFIED

Residential Energy Saver

High Input Direct Vent Water Heater

Features:

Bradford White is ISO registered to the

9001 9001 standard.

S T A N D A R D

All residential storage models meet or exceed efficiency requirements of the Department of Energy. ASHRAE Standard 90.1 b (current standard) and the National Appliance Energy Conservation Act of 1987 recent amendment effective January 20, 2004 which supercedes all state and local efficiency requirements.

1" Non-CFC foam insulation—surroundsthe tank surface, saving energy by retarding loss of heat.

Closed combustion—allair for combustion is taken directly from the outside. Theco-axialvent pipe (pipe inside a pipe) draws combustion air in through the outer pipe (6"), and exhausts the products of combustion through the inner pipe (4").

Co-axial—rotationalventing at top of unit.

Heat Traps—factoryinstalled, minimizes heat loss through piping.

Water Connections—3/4"NPT factory installed true dielectric fittings. Extends water heater life and eases installation.

No electrical power necessary.

Piezo igniter—forease of lighting the pilot.

Vitraglas® lined tank—BradfordWhite water heater tanks are protected from the corrosive effects of hot water by an exclusive ceramicporcelain-likecoating. The Bradford White high silica Vitraglas® lining provides a tough interior surface for our water heater tanks.

Factory installed Hydrojet® Total PerformanceSystem—cold inlet sediment reducing device. Helps prevent sediment build up in tank. Increases first hour delivery of hot water while minimizing temperature build up at top of tank.

Protective magnesium anode rod—provides added protection against corrosion for long trouble-free service.

Brass drain valve.

T&P relief valve—included.

Side Tappings—forspace heating purposes.

Fully automatic controls—automatictemperature selection at your fingertips.Built-inenergycut-offswitch prevents abnormally high water temperature for extra safety.Built-ingas pressure regulation. Fastacting thermostat starts heat recovery cycle sooner.

Optional vent kits—allowfor up to 8 foot max vertical and 8 foot max horizontal (2.4 meters). AllDH-1models must be terminated horizontally

Six or ten year limited warranty on steel tank—heavy gauge steel automatically formed, rolled and welded to assure a continuous seam for glass lining.

Six year limited warranty on parts.

Design certified by CSA International. (formerly AGA and CGA)

MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 7,063,133 B2; 5,954,492; 5,954,492; 5,761,379; 5,943,984; 5,081,696; 5,988,117; 6,142,216; 5,199,385; 5,574,822; 5,372,185; 5,485,879; 5,277,171; (B1)5,341,770; 5,660,165; 5,596,952; 5,682,666; 4,904,428; 5,023,031; 5,000,893; 4,669,448; 4,829,983; 4,808,356; 5,115,767; 5,092,519; 5,052,346; 4,416,222; 4,628,184; 4,861,968; 4,672,919; Re. 34,534. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 1,272,914; 1,280,043; 1,289,832; 2,045,862; 2,112,515; 2,108,186; 2,107,012; 2,092,105.5.

 

 

 

 

 

X

 

 

 

 

 

The standard vent kit (239-42979-00)is ordered and shipped separately. The

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

components are as follows: 4" vent tube*, 6" Air Intake Tube, Vent Terminal, Inner Wall

6.5 inch (16.5 cm)

 

11 1/2

 

 

 

 

 

 

 

 

 

 

 

 

Term Mounting Flange, Outer Wall Term. Mounting Flange, Vent Terminal Hardware,

 

 

 

 

 

 

 

 

 

 

 

 

 

Min. Diameter Hole in Wall

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RTV Silicone Sealant, 4" Vent Elbow and a 6" Air Intake Elbow. The vent tube and air

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

11 9/16

 

 

 

 

 

 

 

 

 

 

 

 

 

 

intake tube telescopes from 13 3/4" to 23 11/16".

 

Y

7 3/16”

 

 

 

 

 

 

 

 

Boot Extension

 

 

 

Horizontal "X"

 

 

 

 

H

 

 

 

 

 

 

SIDE WATER OUTLET

 

 

 

16 1/4

18

25 1/4

37 3/4

61 5/16

 

 

 

 

 

17 3/16

20 11/16

35 3/16

57 7/8

107 5/16

 

 

 

 

11 9/16

order

order

no add'l

order

order

 

 

 

 

kit F

kit G

kit req'd

kit H

kit I

 

 

A

 

 

 

 

B

 

16 5/16

*order

order

order

order

order

C

 

 

 

E & F

DRAIN VALVE

 

"Y"

17 1/4

kit F (2)

kit G & F

kit F

kit H & F

kit F & I

1/2” GAS

SIDE WATER INLET

 

18 1/16

order

order

order

order

order

CONNECTION

 

 

Vertical

20 3/4

kit F & G

kit G (2)

kit G

kit G & H

kit G & I

 

 

 

35 1/4

kit F

kit G

kit H

kit H (2)

kit I

D

G

 

 

25 5/16

order

order

order

order

order

Horizontal Installation Only

 

38 1/16

order

order

order

order

order

 

57 15/16

kit H & F

kit H & G

kit H (2)

kit H (3)

kit H & I

 

 

 

 

 

 

 

 

61 3/8

order

order

order

order

order

Optional Kits:

 

 

 

107 3/8

kit I & F

kit I & G

kit I

kit I & H

kit I (2)

Part Number

Description

243-42516-00

Kit F – Telescopes from 434" to 51116"

243-42517-00

Kit G – Telescopes from 612" to 9316"

243-42514-00

Kit H – Telescopes from 1334" to 231116"

243-42512-00

Kit I – Telescopes from 491316" to 951316"

*(2) = Order two of the kits referenced.

*(3) = Order three of the kits referenced.

The bold text above show what kit(s) are needed in addition to the standard vent and air intake tubes. If the standard vent and air intake tubes are not used in the venting system (those that do not have bold text) they can be discarded or saved.

For vent distances not found in the selection chart above, please contact the Product Management Department for sizing recommendations.

Energy Saver Direct Vent Models

CEC listed.

 

 

78% Recovery Efficiency for all models.

 

 

NATURAL GAS

 

 

 

 

 

 

 

A

B

 

C

D

 

E

 

F

G

 

 

 

 

 

 

 

 

 

GPH Rec.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

50˚C/90˚F Rise

Ht. to

 

 

Ht. to

Ht.to

Ht. to

Space

Space

Vent

Approx.

 

 

Imp.

U.S.

 

 

 

 

 

 

Center Line

Jacket

Top of

Gas

T&P

Htg.

Htg.

Dia.

Shpg.

 

Model

Gal.

Gal.

Liters

Input

KW

Imp.

US

LPH

of Vent

Dia.

Heater

Conn.

Conn.

Outlet

Inlet

in. mm.

Wt.

 

Number

Cap.

Cap.

BTU

Gal.

GPH

in.

mm.

in.

mm.

in.

mm.

in.

mm.

in.

mm.

in.

mm.

in.

mm.

Lbs. Kg.

 

DH1-504T6BN(LP)

40

48

182

50,000

14.7

43

53

201

7514

1911

20

508

5834 1492

1514

387

5214 1327

5214 1327

1534

400

4/6 102/152

197/89.4

 

DH1-65T6BN

54

65

246

55,000

16.1

47

58

220

7814

1988

22

559

62

1557

1514

387

56

1422

56

1422

1534

400

4/6 102/152

243/110

 

DH1-75S6BN(LP)

62

75

284

60,000

17.6

51

63

238

7512

1918

2412

622

59

1499

1514

387

52

1321

52

1321

1612

419

4/6 102/152

281/127

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

For 10 year models, change suffix from “6” to “10”.

All propane gas heaters are equipped with Cast Iron Burner.

Change suffix “BN” to “CX”.

Suitable for Water (Potable) Heating and Space Heating

Toxic chemicals, such as those used for boiler treatment, shall NEVER be introduced into this system. This unit may NEVER be connected to any existing heating system or component(s) previously used with a non-potablewater heating appliance.

(LP) Propane Gas Inputs

 

 

 

Recovery at

 

50°C Rise and 90°F Rise

 

Imp.

U.S.

Liters/

DH1-504T6CX

GPH

GPH

Hr.

48,000 BTU/H 14.1 KW 41

50

189

DH1-75S6CX

57,000 BTU/H 16.7 KW 48

60

227

General

All gas water heaters are certified at 300 PSI (2068 kPa) test pressure and 150 PSI (1034 kPa) working pressure. All water connections are 34" (19mm) NPT on 11" (703mm) centers on top of unit, all gas connections12" (13mm). All models design certified by CSA International (formerly AGA and CGA). Recovery based on rated efficiency.

Meets NAECA requirements. All natural gas models meet SCAQMD requirements.

Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.

6-YearLimited Warranty on Component Parts

BRADFORD WHITE CORPORATION has a 6-yearwarranty on replaceable parts– thermostat, burner, dip tube, drain valve and piezo igniter. These quality components are manufactured for us by industry leaders and will be replaced in the event of failure during the parts warranty period (exclusive of shipping andre-installationcost).§

6 or 10-YearLimited Tank Warranties

BRADFORD WHITE CORPORATION LIMITED WARRANTY: Protects your investment in a quality glass-linedheater. If the tank leaks for reasons of faulty materials, workmanship, or corrosion within the warranty period, the heater will be replaced with a comparable heater of our manufacture (exclusive of shipping andre-installationcost).§

§Some states do not allow limitations on warranties. See complete copy of the warranty included with this product. Indicated warranties apply to USA, Canada and Puerto Rico installations.

Vitraglas® and Hydrojet® are registered trademarks of Bradford White® Corporation. ©2006, Bradford White Corporation. All rights reserved.

For U.S. and Canada field service, contact your professional installer or local Bradford White sales representative.

Sales/800-523-2931

Fax/215-641-1670

Technical Support/ 800-334-3393

Fax/269-795-1089

Warranty/800-531-2111

Fax/269-795-1089

International:

Telephone/215-641-9400

Telefax/215-641-9750

Fax on Demand:

888-538-7833

wbradfordwhite.com

Mississauga, ON

Sales/Technical Support

866-690-0961

905-238-0100

Fax/905-238-0105

www.bradfordwhitecanada.com

105-B-HIDV-1106-A

Printed in U.S.A.