Bowers & Wilkins 600 Series 2 DM605 S2 User Manual
F l o o r- standing loudspeaker system
●The DM605 S2 is unique answer to the problem of a system that deserves deep,
controlled bass extension when there is not the physical room to incorporate a separate
subwoofer. The 130w amplifier is used to power the two bass drivers to give truly
extended bass output.
the two bass drivers are driven by the internal amplifier to give truly extended bass
performance. Bass performance is further enhanced by Flowport™ technology, which
smoothes the passage of air over both the internal and external port flares to reduce
chuffing and improve detail. A separate line level LFE input can be driven directly from the
subwoofer output on an AV processor or amplifier.
Nautilus™ Tweeter: B&W's Nautilus Tweeter technology ensures that the sound
remains focused and
unparalleled three dimensional accuracy.
Kevlar®: B&W developed and patented the method of using Kevlar® for
loudspeaker cones to reduce unwanted standing waves. DuPont originally
created Kevlar® for use in bulletproof vests.
Flowport™: Golf ball aerodynamics theory points the way towards lower
distortion reflex ports. Dimples improve the way the air flows over the surface of
any object. In the case of reflex ports, they offer a significant improvement over
simply flaring the port ends in reducing air flow turbulence at each end of the
port; so you get less chuffing noise and less compression at high sound levels.
91dB spl (2.83V, 1m)
Nominal impedance 8Ω (min 3Ω)
1 x 25mm metal dome
25W - 200W into 8 ohm on unclipped
1 x 180mm woven Kevlar® cone
Height: 996mm Width: 236mm
2 x 180mm paper/Kevlar® cone bass
25Hz (adjustable) – 20kHz ± 3dB on
Cabinet: Black Ash Vinyl
Grilles: Black cloth
B&W Loudspeakers Ltd reserves the right to amend details of the specifications without notice in line with technical developments. E & OE. All trademarks acknowledged.