Boston Acoustics SL95 User Manual

0 (0)
Installation / Installatie / Installation / Einbau / Installazione / Instalación
The Boston Acoustics SL 90 is a two-way speak­er system that fits most standard 6 x 9-inch oval cutouts and requires only 2
5
/8inches (67.0mm) clearance behind the mounting surface. It can be used with factory grilles, or with the supplied grilles.
Boston Acoustics SL95 is een tweeweg­luidsprekersysteem dat past in de meeste ovale standaarduitsparingen van 150 x 230 mm, waarbij slechts 67.0 mm vrije ruimte achter het mon­tagevlak is vereist. U kunt het gebruiken met de originele fabrieksgrillen, of met de meegeleverde grillen.
Le système de haut-parleurs à deux voies Boston Acoustics SL95 s’adapte sur la plupart des ouvertures ovales standard de 150 x 230mm (6 x 9 pouces) et ne requiert qu’une profondeur de montage de 67mm (2
5
/8pouces). Il peut être équipé des grilles d’origine ou des grilles fournies.
Das Boston Acoustics 2-Wege­Lautsprechersystem SL95 kann in der Regel in einen üblichen 150 x 230mm großen ovalen Ausschnitt eingebaut werden. Die erforderliche Einbautiefe beträgt nur 67.0mm. Wahlweise kön­nen die Lautsprecherabdeckungen des Fahrzeugherstellers oder die mitgelieferten Abdeckungen verwendet werden.
Il Boston Acoustics SL95 è un sistema di altopar­lanti a tre vie adatto alla maggior parte delle sfinestrature ovali standard da 150 x 230mm, che richiede solamente 67.0mm di profondità di mon­taggio. Può essere usato con le griglie montate in fabbrica sul veicolo oppure con quelle fornite.
El SL95 de Boston Acoustics es un sistema de altavoces de dos vías que se ajusta a la mayoría de los emplazamientos estándar de forma oval de 150 x 230mm y requiere únicamente una pro­fundidad de montaje de 67.0mm. Puede utilizarse con las rejillas montadas en el vehículo o las rejillas suministradas.
Notice: Installation of automotive stereo compo­nents requires experience with a variety of mechanical and electrical procedures. These instructions explain the basic installation proce­dure for the SL95, not the exact installation methods to be used in any given case. If you do not have the experience that these procedures require, we strongly suggest you consult your Boston Acoustics dealer about professional installation.
Opmerking: Het installeren van stereocomponenten in
auto’s vereist ervaring met een aantal mechanische en elektrische procedures. In deze instructies vindt u de fundamentele installatieprocedure voor de SL95, het is geen exacte installatiemethode die in alle gegeven situa­ties bruikbaar is. Wanneer u niet beschikt over de erva­ring die voor de betreffende procedure is vereist, raden wij u ten sterkste aan de dealer van Boston Acoustics te raadplegen.
Remarque : Une bonne connaissance de diverses procédures mécaniques et électriques est requise pour effectuer l’installation de composants stéréo pour automobile. Ce guide présente la procédure générale d’installation du système SL95, mais pas les méth­odes spécifiques à chaque cas. Si vous n’avez pas l’expérience requise, adressez-vous à votre revendeur Boston Acoustics.
Hinweis: Der Einbau der Lautsprecher ist mit verschiedenen mechanischen und elektrischen Arbeiten verbunden und setzt entsprechende Erfahrungen und Fertigkeiten voraus. Diese Anleitung beschränkt sich auf eine grundlegende Beschreibung. Eine detailliertere Behandlung ist hier nicht möglich. Wenn Sie nicht über die erforderlichen Erfahrungen verfügen, empfehlen wir Ihnen nachdrücklich, sich an Ihren Boston Acoustics Händler zu wenden.
Avviso: L’installazione dei componenti stereo per autoveicoli richiede esperienza in una varietà di proce­dure meccaniche ed elettriche. Le presenti istruzioni delineano la procedura generale di installazione del SL95, non i metodi di installazione specifici richiesti dai casi individuali. Chi non avesse esperienza sufficiente per espletare i compiti richiesti dovrebbe consultare il rivenditore della Boston Acoustics.
Aviso: La instalación de los componentes estereofóni­cos para automóvil requiere cierta experiencia en una serie de procedimientos mecánicos y eléctricos. Las presentes instrucciones explican el procedimiento de instalación básico del SL95, pero no los métodos exactos de instalación que deben utilizarse en un caso concreto. Si usted no posee la experiencia requerida para esta clase de trabajo, le recomendamos que consulte a su proveedor de Boston Acoustics.
Installation: The SL95 can be installed above or below the mounting surface behind factory grilles. Typically, your vehicle will accommodate the SL95 without modification. If not, use the supplied template to cut a mounting hole.
Before cutting a hole, check the clearance of both speaker locations. Avoid speaker contact with door frames, handles, and window tracks. Check the window clearance by rolling the win­dow up and down. Also check for clearance with the door opened and closed.
Attach the wires to the speaker and attach the assembly to the cutout as shown. Be sure to connect positive to positive, negative to nega­tive.
When the speaker has been correctly mount­ed, there should be no air leaks between the front and back of the surface that the speaker is mounted to.
Installatie: De SL95 kan op of onder het montagevlak
achter de fabrieksgrill worden geïnstalleerd. In het alge­meen kunt u de SL95 zonder modificaties in uw voer­tuig onderbrengen. Als dit niet het geval is, kunt u met de meegeleverde sjabloon een montagegat uitsnijden.
Controleer voordat u het gat snijdt de vrije ruimte ter plaatse van de beide luidsprekers. Vermijd dat de luidsprekers in contact komen met deurframes, han­dels of raamgeleiders. Controleer of het raam vrij kan bewegen door het op-en-neer te draaien. Controleer de vrije ruimte tevens bij een geopende of gesloten deur.
Bevestig de kabels aan de luidspreker en bevestig het geheel in de uitsparing zoals aangegeven. Zorg ervoor dat u positief aan positief, en negatief aan negatief aansluit. Bij een juist gemonteerde luidspreker mogen er zich geen luchtlekken bevinden tussen de voor- en achterzijde van het montagevlak.
Installation : Les haut-parleurs SL95 peuvent être installés au-dessus ou au-dessous de la surface de montage, derrière les grilles d’origine. Le système peut
généralement être monté sans apporter de modifica­tions au véhicule. Dans le cas contraire, le gabarit fourni permet de découper une ouverture de montage.
Avant de percer l’ouverture, vérifiez le dégage­ment disponible pour les deux haut-parleurs. Ils ne doivent toucher ni le cadre de la portière, ni les poignées, ni les coulisses des fenêtres. Ouvrez et fer­mez les vitres pour en vérifier le dégagement. Vérifiez également le dégagement la porte ouverte, puis la porte fermée.
Connectez les câbles au haut-parleur, puis reportez-vous à l’illustration pour monter l’ensemble sur son emplacement. Veillez à bien connecter le posi­tif sur le positif et le négatif sur le négatif. Lorsque le haut-parleur a été monté correctement, il ne doit pas laisser passer d’air entre l’avant et l’arrière de la sur­face de montage.
Einbau: Die Lautsprecher können auf die Einbauaus­schnitte aufgesetzt oder versenkt hinter den im Fahr­zeug vorhandenen Lautsprecherabdeckungen montiert werden. Im allgemeinen sind Änderungen für den Einbau nicht erforderlich. Ansonsten korrigieren Sie den Einbauausschnitt mit Hilfe der beiliegenden Schablone.
Prüfen Sie vor dem Vergrößern des Einbauaus­schnitts, ob für beide Lautsprecher die erforderliche Einbautiefe gegeben ist. Achten Sie darauf, daß die Lautsprecher nicht mit Türrahmen, Griffen oder dem Fenstermechanismus in Berührung kommen. Stellen Sie sicher, daß sich die Fenster auch mit eingebauten Lautsprechern noch öffnen und schließen lassen. Vergewissern Sie sich, daß der nötige Abstand auch beim Öffnen und Schließen der Türen gegeben ist.
Befestigen Sie die Kabel an den Lautsprechern und montieren Sie die Baugruppe auf dem Einbauaus­schnitt (siehe Abbildung). Achten Sie darauf, daß Plus­und Minuskabel nicht vertauscht werden. Sachgemäß befestigte Lautsprecher sitzen luftdicht auf der Montagefläche.
Installazione: Il SL95 può essere installato sia sopra che sotto la superficie di montaggio dietro le griglie montate in fabbrica. Di solito, è possibile montare il SL95 nelle esistenti predisposizioni, senza modifica alcuna. In caso contrario, usare la mascherina fornita per praticare il foro di montaggio.
Prima di praticare il foro, controllare lo spazio libe­ro disponibile in corrispondenza all’ubicazione deside­rata di entrambi gli altoparlanti. Evitare di porre gli altoparlanti in contatto con i telai delle portiere, con le maniglie e con i binari dei finestrini. Controllare lo spa­zio libero del finestrino sollevandolo ed abbassandolo a fine corsa. Controllare anche lo spazio libero della portiera, aprendola e chiudendola.
Collegare i fili all’altoparlante e montare il gruppo sulla sfinestratura nel modo illustrato. Accertarsi di collegare il filo positivo con il polo positivo e quello negativo con il polo negativo. Se l’installazione è stata eseguita correttamente, non devono esistere perdite d’aria tra la parte anteriore e quella posteriore della superficie di montaggio dell’altoparlante stesso.
SL95
Loading...
+ 1 hidden pages