Boston Acoustics DJ030105-V1 User Manual

Size:
868.88 Kb
Download

Connecting the Apple® iPod®

to your MicroSystem CD

1a. Connect iPod to Front Input

Using the required cable, connect the headphone output on the iPod to the Front “AUX 3” input located on the front right hand side of the MicroSystem CD.

Required Cable: Stereo 18-Inchto Stereo18-InchCable

1b. Connect iPod to Rear Input

Using the required cable, connect the headphone output on the iPod to the Rear “AUX 1” input located on the rear right hand side of the MicroSystem CD.

Required Cable: Stereo 18-Inchto Stereo RCA Cable

2. Turn On iPod and Set Volume

Turn on the iPod and set the volume to 50% to 70% of total output.

Note: As there is no display on the iPod Shuffle®, you may need tore-adjustthe volume on the iPod Shuffle to better match the input’s sensitivity (after you complete step 3) if the output level is not loud enough on the Microsystem CD.

V

3. Select “Aux 1” Input on MicroSystem CD

If using the Front Input “Aux 3”:

Select “Aux 3” on the MicroSystem CD by pressing the “AUX” button three times, the Microsystem CD display will read “AU-3”.

If using the Rear Input “Aux 1”:

Select “Aux 1” on the MicroSystem CD by pressing the “AUX” button once, the Microsystem CD display will read “AU-1”.

 

Boston Acoustics, Inc.

Boston, Boston Acoustics, and the Boston Acoustics logo are registered

 

300 Jubilee Drive

trademarks of Boston Acoustics, Inc. iPod, iPod Shuffle, and the iPod design

 

Peabody, MA 01960

are registered trademarks of Apple Computers. Inc.

 

 

www.bostonacoustics.com

© 2005 Boston Acoustics, Inc. All rights reserved.

DJ030105-V1