Boston Acoustics CPS 10Wi User Manual

Size:
4.24 Mb
Download

Classic

CPS 12Wi, CPS 10Wi, CPS 8Wi

wireless-readysubwoofers

español

Italiano

Deutsch

Subwoofers Boston

Wireless-ReadySubwoofers

Wireless-ReadySubwoofers

Classic Series

(predisposti per

Bedienungsanleitung

Manual del Propietario /

funzionamento wireless)

/ Sicherheitshinweise /

Instrucciones de Seguridad /

Manuale dell’utente /

Konformitätserklärung

Información de Cumplimiento

Istruzioni di sicurezza /

 

 

Informazioni sulla conformità

 

français

svenska

 

Caissons de graves Boston

Subwoofrar med wireless-

 

Classic Series / Guide de

ready / Bruksanvisning /

 

l’utilisateur / Instructions

Säkerhetsanvisningar /

 

de sécurité / Informations

Information om

wireless-ready

relatives à la conformité

överensstämmelse

 

atIOn Inf ance OrMcOMplI Instruct safety / Manual Owner’sIO/ ns

IMPORTANT SAFETY INSTRUCTIONS

This symbol found on the apparatus indicates hazards arising from dangerous voltages.

This symbol found on the apparatus indicates the user should read all safety statements found in the user manual.

This symbol found on the apparatus indicates double insulation.

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding-typeplug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12.Unplug this apparatus during lightning storms or when unused for long periods of time.

13.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supplycord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

14.Maintain a minimum distance of 2” (50mm) around the front, rear, and sides of the apparatus for sufficient ventilation. The ventilation should not be impeded by covering the ventilation openings or placing on or around the apparatus items such as newspapers, table-cloths,curtains, etc.

15.No open flame sources, such as lighted candles, should be placed on the apparatus.

16.The apparatus shall not be exposed to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus.

WARNINg! To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture.

This symbol found on the apparatus indicates that the apparatus must be placed in a separate collection facility for electronic waste and not dosposed with household waste.

17.Either the power inlet connector on the rear of the apparatus or the power plug at the wall must remain accessible, to be able to disconnect power from the apparatus.

18.To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC receptacle.

19.The mains plug of the power supply cord shall remain readily operable.

American Users:

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Canadian Users

This class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de classe B est conforme á la normeNMB-003du Canada.

Specifications

CPS 12Wi

CPS 10Wi

CPS 8Wi

Frequency Range:

25Hz – 150Hz

28Hz – 150Hz

31Hz – 150Hz

Amplifier Power:

400 watts RMS

300 watts RMS

200 watts RMS

 

(850 watts Peak)

(650 watts Peak)

(350 watts Peak)

Bass Driver:

12” (305mm) DCD

10” (254mm) DCD

8” (203mm) DCD

Dimensions: (H x W x D)

151116 x 16716 x 17”

1378 x 141116 x 17”

1112 x 12316 x 1538

 

(397 x 416 x 431mm)

(352 x 372 x 431mm)

(292 x 309 x 389mm)

Weight:

48.5 lbs

40 lbs

26 lbs

 

(22kg)

(16.8kg)

(11.7kg)

Introduction

Boston Acoustics Classic Series Wireless-ReadySubwoofers

Thank you for choosing Boston Acoustics. The Classic Series Wireless-Readysubwoofers incorporatehigh-qualitycomponents that produce the legendary Boston Sound. The subwoofers are ideally suited for use in ahigh-quality5.1 channel home theater or stereo music system. They are capable of impressive deep bass and high output from remarkably compact enclosures. In addition, they feature BassTrac®, a proprietaryBoston-designedcircuit that tracks the input signal to the subwoofer and prevents its amplifier from being driven into audible distortion. The benefit: the bass stays clean and strong at any listening level.

Features

Play wirelessly with the optionalWT 50WirelessTransmitter

12”, 10”, and 8”woofers

200 to 400 watts RMS

High-outputfront-firing,front-porteddesign

Deep Channel® Design (DCD) woofers for more bass from less amplifier power

BassTrac circuitry for tight, distortion-freebass at all output levels

Adjustable crossover frequency and volume control

Switchable polarity

Signal-sensingautomaticaudio-oncircuitry

Speaker and line level inputs

Ultra-rigidreinforced cabinetry

E N G L I S H

3

Unpacking the System

Carefully unpack the subwoofer. If there is any sign of damage from transit, report it immediately to your dealer and/or delivery service. Keep the shipping carton and packing materials for future use. Be sure to keep your purchase receipt in a safe place, as it may be required for warranty purposes.

CPS 12Wi, CPS 10Wi, and CPS 8Wi subwoofers

Placement Options

Place the subwoofer next to a wall or in a corner near your main speakers. The sound is typically best when the subwoofer is within 15 feet (4.5m) of the main speakers. The sharp 24dB/octave crossover roll-offpermits placement farther from the main speakers if necessary. Since the ear is unable to localize the low frequencies of the subwoofer, the bass still appears to come from the main speakers. Experimentation is key, however most positions in the room will work well.

The level of bass output from the subwoofer will vary at different positions in a room. When placed near walls, its loudness is emphasized. Corner placement provides the most bass output. Placement completely away from walls may produce too little bass. Regardless of the natural bass level within the room you will always have the ability to adjust the level of the subwoofer from the built in volume control. If at any time you move the subwoofer be sure to check all of your settings.

IMPORTANT: Do not place the subwoofer where there is a chance of contact between the rear panel and drapes or furniture.

Position subwoofer

in corner for maximum bass output

4

Connections

After your speakers are properly placed, you are ready to wire your system.

NOTE: Power is always supplied to the subwoofer electronics unless it is unplugged or switched to theMute position using theAudio On switch located on the rear panel. Theauto-oncircuitry only activates or deactivates the power amplifier. Make sure your subwoofer and receiver are unplugged when making the connection (230v models include a main power switch which turns off all power of the subwoofer).

Power: When plugging your subwoofer in be sure to use a wall outlet, or dedicated electrical outlet. Some receivers will provide a switched outlet. Do not use this. Theseon-boardelectrical outlets do not offer the amount of current or proper isolation required by a power amplifier, such as the one in your subwoofer.

Line level or LFE: On most systems use theline level input or theLFE input. These inputs accept theline-levelsignal from your receiver’s subwoofer output. Your receiver’s manual should indicate which input is most appropriate.

Connecting the Subwoofer to Digital Home Theater Systems Using LFE

Digital 5.1, 6.1 and 7.1 home theater electronics dedicate one channel (the “.1”) to reproduce the special low-frequencyeffects (LFE) information (such as explosions and thunder) contained indigitally-encodedsoundtracks.

Select ”subwoofer-yes”from your receiver’sset-upmenu. Hooked up this way, the receiver’s amplifier is relieved of having

to reproduce the difficult low bass signals that can drive the receiver into audible distortion. In some cases it can also depend on several other settings within a receiver. We recommend consulting your receiver manual for further assistance in this area.

Use an RCA cable (not included), as shown, to connect your digital receiver’s LFE/subwoofer output to the subwoofer.

CPS 12Wi

digital receiver

Sub Out

Connect the other end to the Line Level/LFE input.

Connecting the Subwoofer to Stereo or Dolby® Pro Logic®

For stereo or Dolby Pro Logic systems use the “sub out” connection from your receiver to the input on the subwoofer marked

“L” or “R”.

CPS 12Wi

receiver

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

useeither input

5

use either RCA jack
single conductor (-) RCA to (-) RCA ground cable

Connecting to Electronics Without a Subwoofer Output

If the receiver in your system does not have a subwoofer or LFE output you can connect the CPS Wi subwoofer to a preamp output. Use a stereo RCA cable (not included) to connect the preamp outputs to the “L” and“R” Line Level inputs.

CPS 12Wi

Adjusting the Crossover Control

When using the Line Level inputs (not theLFE input) the subwoofer’sbuilt-incrossover is engaged. As a starting point, set the crossover control on the subwoofer about 10Hz higher than the lower limit of your main speakers’ bass response.Fine-tunethe crossover setting by ear for the smoothest blend with your main speakers. The best setting of the crossover control will depend on speaker placement and personal preference.

Speaker level

Use these high-levelterminals with receivers that do not have subwoofer output. The speaker inputs accept both left and right channel speaker signals from your receiver. When using a home theater receiver, set the speaker type to “Large.”The large setting will produce a fuller sound.

CPS 12Wi

or

Note

Certain receivers use speaker grounding circuits that may be incompatible with external powered audio products, such as powered subwoofers. When speaker wire is used instead of line level cables, this incompatibility can result in an audible hum when the receiver is turned off or switched to a different speaker channel.

If this should happen with your Boston Acoustics subwoofer, you will need to make a ground cable and connect it to either RCA line input on the subwoofer and any unused

RCA line input or output on your receiver

(see diagram). The proper ground cable for this application should consist of two male

 

SURROUND

 

RCA plugs that have their negative outside

CENTER

AM

ANT

 

 

terminals (or “sleeve”) connected to each

 

GND

 

 

other by any length of single conductor

 

 

copper cable. The inside positive (or “pin”)

back of subwoofer

 

terminals should not be wired in either plug.

 

 

back of receiver

use any available RCA jack

6

Optional WT 50 Wireless Transmitter

Transmitter Power

Plug the transmitter power supply into a power outlet. The transmitter power supply requires very little power so you can plug it into an auxiliary power outlet on the receiver. Plug the connector on the power supply cable into the transmitter power input labeled 18V DC.

Wireless ID Switches

Both the CPS Wi Subwoofer and optional WT 50 Wireless Transmitter have Wireless ID switches (located on the rear of the subwoofer and transmitter). The various switch settings change the digital identification code of the wireless signal the WT 50 sends to the subwoofer. The two switches must be set to the same position. Typically you’ll never need to adjust these switches. They are included in case you have more than one CPS Wi subwoofer in your house. Use differentWireless ID switch settings so the subwoofers won’t interfere with each other.

4 3 2 1

L R LFE

DC 18V

 

 

 

 

 

 

WT 50 Transmitter

 

 

 

 

Receiver

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Power supply cord

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note: Do not connect the same audio source to the subwoofer and WT 50 wireless transmitter at the same time.

Operation

Audio On/Auto/Mute

Plug the subwoofer’s AC cord into a wall outlet. Do not use the outlets on the back of the receiver. Set the audio switch to the desired setting.

AUDIO ON – The subwoofer audio is always on.

AUTO – The subwoofer audio will turn on whenever a signal is detected. If no signal is detected after several minutes, it will automatically enter the Mute mode.

MUTE – The subwoofer is muted and will not produce any sound. You may want to unplug your subwoofer if you will not be using it for some time or wish to conserve electricity. (On 230v models only, you may turn off the main power switch, located next to the power cord)

An LED indicator next to the Polarity switch indicates what mode the subwoofer is in:OFF – The subwoofer is unplugged (or the main power switch is off on 230v models)RED – Mute (No signal detected, Amp Off )

gREEN – Audio On (Signal detected, Amp On)

The subwoofer will automatically enter the Mute mode after several minutes when no signal is detected from your system. The subwoofer audio will then turn ON instantly when a signal is detected.

Polarity Control

(0° or 180°): Selects regular (0°) or inverted (180°) phase for the subwoofer. Set this switch to provide the fullest, most dynamic bass. The effect of phase will be most audible onlow-frequencypercussion instruments or music with a continuously repeating bass line.

Crossover Control

Adjusts the frequency of the low pass filter for the subwoofer. Note: This control is not active when using the LFE input jack.

Volume Control

Turn the subwoofer Volume control to the 11 o’clock position. If no sound emanates from the subwoofer, check theAC-linecord,Audio On switch,Power switch (on 230v models), and input cables.

Adjust the subwoofer Volume control until you hear a match between the main speaker and subwoofer. Bass response should not overpower the room but rather be adjusted so there is a natural blend across the entire musical range.

7

Maintenance and Service

All wiring connections should be inspected and cleaned or remade at least once a year.

If a problem does occur, make sure that all connections are properly made, secure and clean. If a problem occurs in one loudspeaker, rewire that speaker in a different location within the system. Should the problem persist then the problem is within the speaker. If the speaker sounds fine in the new position it is a strong indication of a more in depth issue with the electronics in the system. In the event that your speakers ever need service, contact your local Boston Acoustics dealer or visit bostonacoustics.com/dealers for a list of dealers in your area.

Limited Warranty

Boston Acoustics warrants to the original purchaser of an Classic Series subwoofer that it will be free of defects in materials and workmanship in its mechanical parts for a period of 5 years from the date of purchase. The warranty period for the electrical components is 1 year.

Your responsibilities are to install and use them according to the instructions supplied, to provide safe and secure transportation to an authorized Boston Acoustics service representative, and to present proof of purchase in the form of your sales slip when requesting service.

Excluded from this warranty is damage that results from abuse, misuse, improper installation, accidents, shipping, or repairs/ modifications by anyone other than an authorized Boston Acoustics service representative.

This warranty is limited to the Boston Acoustics product and does not cover damage to any associated equipment. This warranty does not cover the cost of removal or reinstallation. This warranty is void if the serial number has been removed or defaced. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

If Service Seems Necessary

First, contact the dealer from whom you purchased the product. If that is not possible, write to:

Boston Acoustics, Inc.

100 Corporate Drive

Mahwah, NJ 07430 U.S.A.

Or contact us via e-mailat:

US: support@bostona.com

Japan: ba_info@dm-holdings.com

Asia Pacific: service@dm-singapore.com

We will promptly advise you of what action to take. If it is necessary to return your Classic Series subwoofer, please ship it prepaid. After it has been repaired, we will return it freight prepaid in the United States and Canada.

For EU Customers Only

This symbol found on the product indicates that the product must not be disposed of with household waste. Instead, it may be placed in a separate collection facility for electronic waste or returned to a retailer when purchasing similar product. The producer paid to recycle this product. Doing this contributes to reuse and recycling, minimizes adverse effects on the environment and human health and avoids any fines for incorrect disposal.

8

INSTRUCCIONES DE SEgURIDAD IMPORTANTES

Este símbolo que se encuentra en el aparato indica peligros derivados de niveles de energía peligrosos.

Este símbolo que se encuentra en el aparato indica que el usuario debería leer todas las declaraciones de seguridad que se encuentran en el manual del usuario.

Este símbolo que se encuentra en el aparato indica un doble aislamiento.

1.Lea estas instrucciones.

2.Conserve estas instrucciones.

3.Preste atención a todas las advertencias.

4.Siga todas las instrucciones.

5.No utilice este aparato cerca del agua.

6.Límpielo sólo con un paño seco.

7.No bloquee ninguna abertura de ventilación. Instálelo de acuerdo con las instrucciones del fabricante.

8.No lo instale cerca de ninguna fuente de calor como radiadores, registradores térmicos, estufas u otros aparatos (incluidos amplificadores) que produzcan calor.

9.No elimine la finalidad de seguridad del enchufe de tipo de puesta a tierra o polarizado. Un enchufe polarizado tiene dos patas con una más ancha que la otra. Un enchufe de tipo de puesta a tierra tiene dos patas y un tercer terminal de puesta a tierra. La pata ancha o el tercer terminal se suministran para su seguridad. Si el terminal suministrado no encaja en su toma de corriente, consulte a un electricista cómo realizar el cambio de la toma de corriente obsoleta.

10.Procure que el cable eléctrico no se pise ni resulte atrapado, especialmente en los enchufes, las tomas de corriente y el punto donde sale del aparato.

11.Utilice sólo implementos / accesorios especificados por el fabricante.

12.Desenchufe el aparato durante tormentas eléctricas o cuando no vaya a utilizarse por períodos de tiempo prolongados.

13.Encargue todas las revisiones a personal de servicio cualificado. Se precisa servicio cuando el aparato haya resultado dañado de cualquier forma, como cuando el cable eléctrico o el enchufe están dañados, se ha vertido líquido o se han introducido objetos en el aparato, el aparato

se ha expuesto a la lluvia o la humedad, no funciona normalmente o ha caído.

14.Mantenga una distancia mínima de 2” (50 mm) alrededor de la parte delantera, trasera y a los lados del aparato para que haya una ventilación suficiente. No debería impedirse la ventilación cubriendo las aberturas de ventilación ni poniendo encima ni alrededor del aparato objetos tales como periódicos, manteles, cortinas, etc.

¡ADVERTENCIA! Para reducir el riesgo de incendio o descarga eléctrica, no exponga este aparato a la lluvia o la humedad.

Este símbolo que se encuentra en el aparato indica que el aparato debe depositarse en un lugar de recogida aparte para residuos electrónicos y no desecharse junto con los residuos domésticos.

15.No debería ponerse sobre el aparato ninguna fuente de llama viva, como velas encendidas.

16.El aparato no debe verse expuesto a goteo ni salpicaduras. No debe ponerse sobre el aparato ningún objeto que contenga líquidos, como jarrones.

17.El conector de entrada eléctrico en la parte trasera del aparato o el enchufe eléctrico en la pared deben permanecer accesibles, para poder desconectar la alimentación del aparato.

18.Para desconectar completamente este aparato del la red de CA, desconecte el enchufe del cable eléctrico de la toma de corriente de CA.

19.El enchufe de red del cable eléctrico debe permanecer operativo en todo momento.

Usuarios de los Estados Unidos:

Nota: este equipo ha sido probado y se ha considerado que está dentro de los límites de dispositivos digitales de clase B, de

conformidad con la parte 15 de las normas de la Comisión Federal de Comunicaciones. Estos límites están diseñados para ofrecer una protección razonable contra interferencias perjudiciales en una instalación residencial. Este equipo genera, utiliza y puede irradiar energía de radiofrecuencia y, si no se instala y utiliza de acuerdo con las instrucciones, puede ocasionar interferencias perjudiciales para las comunicaciones de radio. Sin embargo, no hay ninguna garantía de que no vayan a producirse interferencias en una instalación concreta. Si este equipo ocasiona interferencias perjudiciales en la recepción de radio o televisión, lo cual puede determinarse conectado y desconectando el equipo, se aconseja al usuario que trate de corregir la interferencia mediante una o más de las medidas siguientes:

Vuelva a orientar o vuelva a colocar la antena receptora.

Aumente la separación entre el equipo y el receptor.

Conecte el equipo a una toma de corriente en un circuito diferente a aquel en el que el receptor esté conectado.

Consulte al distribuidor o a un técnico de radio / TV experto para pedir ayuda.

Usuarios de Canadá:

Este aparato digital de clase B cumple la norma canadienseICES-003.

Este aparato numérico de clase B cumple la norma NMB-003de Canadá.

E S P A

ñ

O

L

9

Especificaciones

CPS 12Wi

CPS 10Wi

CPS 8Wi

Margen de frecuencias:

25Hz – 150Hz

28Hz – 150Hz

31Hz – 150Hz

Potencia del amplificador:

400 vatios RMS

300 vatios RMS

200 watts RMS

 

(850 watt de pico)

(650 watt de pico)

(350 watt de pico)

Unidad de bajos:

12” (305mm) DCD

10” (254mm) DCD

8” (203mm) DCD

Dimensiones: (A x A x P)

151116 x 16716 x 17”

1378 x 141116 x 17”

1112 x 12316 x 1538

 

(397 x 416 x 431mm)

(352 x 372 x 431mm)

(292 x 309 x 389mm)

Peso:

48.5 lbs

40 lbs

26 lbs

 

(22kg)

(16.8kg)

(11.7kg)

Introducción

Subwoofers Boston Acoustics inalámbricos Serie Classic

Gracias por escoger Boston Acoustics. Los subwoofers inalámbricos Serie Classic incorporan componentes de alta calidad que producen el legendario sonido de Boston. Los subwoofers son ideales para el uso en un sistema musical estéreo o home theater de 5.1 canales de alta calidad. Pueden producir unos bajos profundos impresionantes y una intensidad elevada desde unas cajas muy compactas. Además, presentan BassTrac ®, un circuito patentando diseñado por Boston que sigue la señal

de entrada hasta el subwoofer e impide que su amplificador sufra una distorsión audible. La ventaja: los bajos es que se mantienen limpios y resistentes con cualquier nivel de sonido.

Características

Reproducción inalámbrica con el transmisor inalámbrico WT 50 opcional

Bafles de bajos de 12”,10”y 8”

RMS de 200 y 400 watt

Diseño con puertos traseros y potencia elevada con puertos frontales

Woofers con diseño Deep Channel ® (DCD) para obtener más bajos a partir de menos potencia de amplificador

Circuitos BassTrac ® para bajos intensos, sin distorsión, en todos los niveles de salida

Frecuencia de transición ajustable y control de volumen

Polaridad conmutable

Circuitos de encendido automático con sensor de señal

Entradas de nivel de línea y parlantes

Cajas reforzadas ultra-rígidas

10