BOSS BVFL10.4-BV10.4IRF-BV7FLIP-BV7IRF User Manual

Size:
1.17 Mb
Download

Releasing and lowering the monitor

To lower the monitor, press the Monitor Release button and pull the monitor down. It will drop freely to 45º.

To lower the monitor further, continue pulling down and the internal mechanism will permit further movement and will hold the monitor in the position in which you leave it.

Push the monitor release button forward

Pull the monitor screen down to the desired angle

To avoid accidental damage, we suggest you always close the monitor assembly when it is not in use. To do so, rotate the monitor back to a 0º left-to-rightposition, and push it up into the monitor base until you hear a “click.” Test that it is secured by gently pulling down on monitor frame.

BVFL10.4 • BV10.4IRF • BV7FLIP • BV7IRF User’s Manual - page 11

Powering up the monitor

To turn the monitor on, press and hold the POWER button for two seconds. When the power is ON, if an input signal is present, the picture will be displayed on the screen. If no signal is present, the monitor will display the message "NO SIGNAL."

If you know a video input signal is present but the monitor displays "NO SIGNAL," be sure to try pressing the AV SELECT button to see if your input source is connected to the other AV input.

To adjust the monitor image, press MODE to access the various adjustment controls such as BRIGHTNESS and CONTRAST. Use the +/- buttons to adjust each parameter until you are satisfied with the picture quality.

Turning on the dome lights

This unit features a three-positionswitch for the dome lights. The switch is located near the monitor release button. The three positions are ON, ON when the car dome lights are on, and OFF.

BVFL10.4 • BV10.4IRF • BV7FLIP • BV7IRF User’s Manualpage 12

Infrared Audio Transmission (BV10.4IRF and BV7IRF only)

The BV10.4IRF and BV7IRF monitors include a wireless infrared transmitter. The transmitter sends a high-qualitystereo signal which can be received by a pair of BossHP-10wireless infrared headphones (sold separately).

The infrared signal is emitted from the large dark lens on the front of the monitor console. Best sound will be obtained if you sit directly in front of the monitor within about six feet. If you choose to sit to one side of the monitor, you can expect good reception within 35º to the right or left of the monitor.

BVFL10.4 • BV10.4IRF • BV7FLIP • BV7IRF User’s Manual - page 13

On-screen(OSD) menu system

This monitor incorporates an on-screenmenu display systems which permits you to setup the monitor for a wide variety of installations and applications.

Enter the menu system by pressing the MODE button on the front of the monitor or the remote control. Pressing the MODE button steps you through the five main screens of the menu system. These are, in order: Color, Picture, OSD (On Screen Display) Menu, Miscellaneous and Exit.

The basic navigation method for this menu system is to:

1

- enter a menu by pressing the MODE button

2

- use the

<

and

> buttons to scroll to the parameter you wish to change

3

- press the MODE button to confirm the selection

4

- use the

<

and

> buttons to adjust the parameter you wish to change

5

- press the MODE button to enter the selection

To leave a menu:

1 - press MODE to move to another menu

2 - press MODE a few times until you arrive at the EXIT screen

3 - wait about 15 seconds, after which time the monitor exits the system automatically.

Sub-menusin the OSD system

Each of the three main menu areas contain submenus permitting you to adjust many aspects of your monitor's behavoir.

In the COLOR menu, you can adjust the following:

CONTRAST • BRIGHTNESS • HUE • SATURATION

In the OSD menu, you can adjust the following:

LANGUAGE (language used in the menus)

OSD-HandOSD-V(position of image on monitor screen)

OSD-TIMER(length of time OSD system remains present after last activity.

ON means 5 seconds, OFF means OSD will stay on until you exit the system. TRANSLUCENT (controls if menu background is opaque or translucent. After

selecting this function, use the < and > keys to turn translucency on or off).

In the MISCELLANEOUS menu, you can adjust the following:

SIGNAL SOURCE (permits you to switch between A/V input sources 1 and 2. After selecting this function, use the < and > keys to choose the input source).

RESET (YES means return monitor to factory defaults, NO means keep custom settings you have created).

BVFL10.4 • BV10.4IRF • BV7FLIP • BV7IRF User’s Manual - page 14

Troubleshooting

If you experience operation or performance problems with this product, compare your installation with the electrical wiring diagram on the previous page. If problems persist, read the following troubleshooting tips which may help eliminate the problems.

SYMPTOM

 

CAUSE

 

No picture or

Power cord is not

sound.

properly connected.

 

 

A/V input cables not

 

 

properly connected.

 

 

A/V input source is not

 

 

operating properly.

 

 

 

No picture.

A/V signal not present.

 

 

Contrast and/or

 

 

brightness is set

 

 

improperly.

 

 

TV reception is poor

 

 

(applies to system with TV

 

 

tuner only)

 

 

 

Remote control

Battery is dead.

does not function

 

 

properly.

Remote is not being used

 

 

in direct line-of-sightwith

 

 

the player or remote IR

 

 

sensor. Transmission is

 

 

best within 6 feet/35º

 

 

angle of IR sensor on the

 

 

monitor.

 

 

 

 

REMEDY

Check that power connections are properly made and all fuses are in functioning condition.

Check all cables.

Replace or repair A/V source (DVD player, video game, etc.)

Check all cables. If necessary, repair or replace A/V source.

Adjust contrast and brightness levels to see if picture appears.

Check and adjust antenna system. Move to another area with better reception, if possible.

Replace battery.

Be sure when being used, the remote is being pointed directly toward the player or remote IR sensor (if installed).

BVFL10.4 • BV10.4IRF • BV7FLIP • BV7IRF User’s Manual - page 15

Specifications

MODEL

BVFL10.4

BV10.4IRF

 

10.4" Flip Down

10.4" Flip Down TFT Monitor with

 

TFT Monitor

Built-InIR Audio Transmitterr

 

 

 

A/V SYSTEM

 

 

Screen size

10.4"

10.4"

Video Compatibility

NTSC/PAL auto-compatible

NTSC/PAL auto-compatible

LCD panel type

Active Matrix TFT

Active Matrix TFT

Resolution, pixels

1152 x 234

1152 x 234

Brightness

500 NITS

500 NITS

 

 

 

GENERAL

 

 

Operating voltage

12V DC

12V DC

Dimensions (L x W x H)

11.4 x 11.0" x 1.3"

11.4 x 11.0" x 1.3"

 

 

 

MODEL

BV7FLIP

BV7IRF

 

7" Flip Down

7" Flip Down TFT Monitor with

 

TFT Monitor

Built-InIR Audio Transmitterr

 

 

 

A/V SYSTEM

 

 

Screen size

7"

7"

Video Compatibility

NTSC/PAL auto-compatible

NTSC/PAL auto-compatible

LCD panel type

Active Matrix TFT

Active Matrix TFT

Resolution, pixels

1152 x 234

1152 x 234

Brightness

450 NITS

450 NITS

 

 

 

GENERAL

 

 

Operating voltage

12V DC

12V DC

Dimensions (L x W x H)

8.2" x 7.7" x 1.3"

8.2" x 7.7" x 1.3"

All specifications subject to change without notice.

BVFL10.4 • BV10.4IRF • BV7FLIP • BV7IRF User’s Manual - page 16