BOSS BV7990T User Manual

Size:
918.44 Kb
Download

 

In-DashAM/FM DVD/MP3/CD Receiver

BV7990T

 

 

With 4.3 Widescreen TFT Monitor

CONTENTS

 

 

With Built - in TV Tuner and USB Port

Safety Information......................................................................................

2

Disc Notes .................................................................................................

3

Installation .................................................................................................

4

Panel Angle Adjustment ..............................................................................

7

Electric Connection ....................................................................................

 

 

8

Remote Control ..........................................................................................

9

Basic Operation ........................................................................................

 

 

11

MP3/WMA/JPEG Disc Play .....................................................................

 

 

15

AUX Operation .......................................................................................

15

Scroll Caption Operation ..........................................................................

 

 

15

Video Quality Adjustment .........................................................................

16

Rear View Camera .................................................................................

 

 

16

MPEG4 Player ........................................................................................

16

USB Operation .......................................................................................

 

 

17

On-ScreenDisplay Function ...................................................................

 

 

17

Multi-AudioLanguage Function ..............................................................

18

Multi-SubtitleLanguage Function ...........................................................

18

Multi-AngleFunction .............................................................................

18

Title Menu Function ...............................................................................

18

TV Operation ..........................................................................................

18

Setup .........................................................................................................

 

 

19

General Setup ........................................................................................

 

 

19

Speaker Setup .......................................................................................

21

Dolby Digital Setup ................................................................................

21

Preferences Setup .................................................................................

22

Defaults Table ........................................................................................

23

Specifications ...........................................................................................

24

Trouble Shooting ......................................................................................

25

1

SAFETY INFORMATION

CAUTION:

THIS DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS DVD PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE . HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE DVD PLAYER CORRECTLY AS INSTRUCTED.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES.

THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. Patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.Use of this

copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless

otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

REGION MANAGEMENT INFORMATION:

This DVD Player is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this DVD Player, this DVD Player cannot play this disc.

2

DISC NOTES

Disc formats supported by this player

DVD

V I D E O

12 cm disc

 

 

(Single-sideddisc only)

 

Video CD

 

12 cm disc

 

CD

 

12 cm disc

MP 3

MP3

CD-RW

 

 

12 cm disc

Discs which cannot be played with this player

DVD-ROM

DVD-R/DVD-RAM

CDV CD-G

Handling and Cleaning

Dirt, dust, scratches and warping of discs may prevent operation.

Do not put stickers on discs

Avoid scratching discs.

Do not warp discs.

A disc should always be kept in its case when not in use to prevent from being damaged.

Do not place discs in the following places:

1.Direct sunlight

2.Dirty, dusty and damp areas 3.Near car heaters

4.On the seats or dashboard

Label side up

Do not touch the underside of the disc

Do not bend

Wipe the disc from center

toward the outside edge

Preparing New Discs with Rough Edges

A new disc may have rough edges on its inside and outside edges. If a disc with rough edges is used, the disc may be not seated properly and the player will not play the disc. Therefore, remove all rough edges in advance by using

a ball point pen or pencil as shown below. To remove the rough edges, press the s i d e o f t h e pen or pencil against the inside and outside edges of the disc.

Rough spots on

outside edge

Ball point pen or pencil

Disc Cleaning

Use a dry soft cloth to wipe the surface. If the disc is quite dirty, use a soft cloth

slightly moistured with isopropyl (rubbing) alcohol. Never use solvents such as benzine, thinner or conventional record cleaners as they may mar the surface of the disc.

Rough spots on inside edge

3

INSTALLATION

NOTES:

Choose a mounting location where the unit will not interfere with the normal driving function of the driver.

Before final installation of the unit, connect the wiring temporarily and make sure it is all connected properly and the unit and the system work properly.

Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts may cause malfunctions.

Consult with your nearest dealer if installation requires the drilling of holes or other modifications to the vehicle.

Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a sudden stop .

If installation angle exceeds 30 from horizontal, the unit might not give its best performance.

30

Avoid installing the unit where it would be subject to high temperature, such as from direct sunlight, or from hot air from the heater, or where it would be subject to dust, dirt or excessive vibration.

DIN FRONT/REAR-MOUNT

This unit can be properly installed either from "Front" (conventional DIN Front-mount)or "Rear" (DINRear-mountinstallation, utilizing threaded screw holes at the sides of the unit chassis). For details, refer to the following illustrated installation methods.

4

INSTALLATION

 

 

DASH BOARD

HEX NUT

 

 

METAL MOUNTING

 

STRAP

SPRING WASHER

CONSOLE

 

PLAIN WASHER

SLIDE BRACKET

 

TAPPING SCREW

HOUSING

 

HEX BOLT

 

REMOVAL KEY

 

PLASTIC COVER

REMOVAL KEY

 

To remove the unit, first remove the plastic covers from each side. Then insert the two REMOVAL KEYS into the slots at the left and right

side of the chassis as shown in the drawing. This will release the unit from its mounting sleeve and permit you to slide it out.

5

INSTALLATION

How To Remove and Install The Front Panel

When detaching or reattaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel recess on main unit .

Detaching the Front Panel

Before detaching the control panel, be sure to turn off the power.

1. Press the release button in the upper left corner of the front panel.(Figure 1. ) 2.Once the left side is released, slide it slightly to the left to disengage it and lift it off.

( Figure 2. )

3.Always store the panel in its protective case to avoid scratches and damage to the connectors on the rear. (Figure 3. )

Install the Front Panel

To reinstall the panel, insert the right side of the panel first, then gently press the left side until you feel a "click.” (Figure 4. )

Press the PWR button (2) briefly to switch the device ON.

6

PANEL ANGLE ADJUSTMENT

CHANGING THE CONTROL PANEL ANGLE

To change the viewing angle of the display, press the (angle) button repeatedly to select the desired angle as show below:

Angle 1

 

Angle 2

 

 

 

Angle 4

Angle 3

Caution:

Never put your finger behind the control panel.

7

WIRING CONNECTIONS

MAIN UNIT

 

 

 

 

 

WHITE

(B+)12V

 

 

 

 

 

REAR CAMERA SWITCH

 

 

 

 

 

 

 

 

ISO CONNECTOR

 

GREEN

(B-)PARKINGBRAKE

 

 

 

 

 

 

 

TV ANT IN

 

 

YELLOW

REAR CAMERA INPUT

 

 

 

 

 

 

 

 

 

 

 

AUX(optional)

VIDEO IN YELLOW

 

 

 

 

 

 

ANTENNA CONNECTOR

 

 

 

RCH IN RED

 

 

 

 

 

 

 

 

 

 

LCH IN WHITE

 

 

 

 

 

RCA CABLE

GREY SUBWOOFER

 

 

 

 

 

 

IGNITION

RED

 

 

 

 

VIDEO OUT 2 YELLOW

 

 

 

 

 

SWITCH(B+)

 

 

 

REAR RCA OUTPUT

COAXIAL OUT BROWN

 

 

CHOKE

 

CABLE (optional)

RCH RED

MEMORY

YELLOW

 

 

 

 

BOX

 

 

 

 

BACK-UP(B+)

 

 

 

 

LCH WHITE

 

 

 

FRONT RCA OUTPUT

 

 

 

 

 

 

 

 

 

CABLE

 

FRONT RCA RED R

GROUND(B-)

BLACK

 

 

 

 

VIDEO OUT 1 YELLOW

 

 

 

 

 

 

 

 

 

 

 

 

FRONT RCA WHITE L

 

 

 

 

(FOR RCA LINE OUT VERSION ONLY)

AUTO

 

FUSE

 

 

 

 

BLUE

 

 

 

 

 

ANTENNA

 

 

 

 

 

 

 

 

 

 

 

 

FRONT

WHITE

 

GREY

FRONT

 

 

 

 

 

 

Lch SPK.

WHITE/BLACK

 

GREY/BLACK

Rch SPK.

 

 

 

 

 

 

 

REAR

GREEN

 

VIOLET

REAR

 

 

 

 

 

 

Lch SPK.

GREEN/BLACK

VIOLET/BLACK

Rch SPK.

 

 

 

 

 

Note:

The (B-)parking brake wire must be connected in order for video images to appear on the monitor. If the wire has not been correctly connected,

the message “PARKING BRAKE” appears on the monitor.

(This wire must be connected to the (-)negative side of the parking brake system of your vehicle. Once you engage the parking brake system, you will be allowed to watch the video.)

8

REMOTE CONTROL

17

16

15

3

19

5

7

20

2

1

13

21

22

 

6

23

14

9

24

 

18

12

 

11

27

 

10

 

4

26

25

8

 

1.CLK

2.MODE

3.STOP

4.SETUP

5.MO/ST(AUDIO)

6. SUBTITLE LOCAL/DISTANT

7.REPEAT

8.GOTO

9. and

10.SEL

11.VOL+/VOL-

12.///

13.MENU

SUB WOOFER 14.BAND(OSD)

15.POWER

16.PLAY/PAUSE

17.MUTE

Press this button to view the clock time. Press again to return to normal display mode.

Press repeatedly to cycle through the various modes: TV > RADIO > DISC > AUX IN.

Press once to pause playback. Press PLAY/PAUSE to resume playback. Please note: if you press STOP twice, playback will start at the beginning of the disc.

Press this button to open the SETUP menu.

In Radio mode, press this button to change between Mono and Stereo reception modes (when a station is weak, sometimes switching to Mono will improve sound quality). In Disc Playback mode, pressing this button opens the AUDIO setup menu for making changes to the way the soundtrack is reproduced.

In DVD Disc Playback mode, pressing this button will allow you to change the subtitle language on discs which have this as an option. In Radio mode, press this button to change the radio reception sensitivity in stations are near or far.

Pressing this button will open a menu presenting you with the playback repeat options available for that kind of disc.

Press this button to begin playback at a moment in the program you designate. Use the number buttons to enter the data that is needed. Press these buttons to skip ahead or back one track. (Note: In DVD mode, press continually the twice to skip back one)

Press this button repeatedly to cycle through the various audio and video adjustments you can make: VOLUME, BASS, TREBLE, BALANCE, FADER, COLOR, BRIGHTNESS, CONTRAST and TINT.

Use these controls to adjust the volume level.

Use these buttons to navigate the various menus present in the product. Also, in TV mode, use the UP and DOWN arrows to change channels, and the LEFT and RIGHT arrows to fine tune a station.

Press this button briefly to display the root level directory of a DVD disc. Press and hold this button to turn on or off the SUBWOOFER output.

In Radio mode, press this button repeatedly to switch between the five radio bands: FM1 > FM2 > FM3 > AM1 > AM2. In Disc Playback modes, Press this button to see information about the disc currently in play.

Press to turn the unit on or off.

In Disc Playback mode, press to pause playback. Press again to start where playback stopped. In Radio mode (when RDS mode is engaged), press this button to make a selection within the PTY stations available. Press this button to turn off the audio. Press again to restore the sound to its prior volume level.

9

REMOTE CONTROL

18.TITLE/PBC

(Playback Control mode), AP (Auto-Programmode).

19.

20.ANGLE MARK BUTTON

21.EQ

22.SEARCH

23.ENTER

24.SKIP

When playing a DVD, pressing this button will open the TITLE menu which is recorded on the DVD. When playing a VCD disc, press this button to create a PBC (Playback Control) menu for the disc to assist in making playback selections. In Radio mode, press and hold this button to start the Auto-Programmode, during which the tuner will scan for all strong stations and assign them to the radio preset buttons.

Press this button to adjust the screen viewing angle (see page 7).

For DVD discs which have alternate viewing angles encoded, when you see the "angle mark" symbol advising you that these angles are available, press this button to see them.

Press repeatedly to cycle through the different equalizer curve presets you may wish to use for enhanced listening.

In Disc Playback mode, press for fast forward playback. In TV mode, press to cause the tuner to search for the next channel on the TV band. This button is used to confirm selections and settings within many of the menus in the OSD system.

In Disc Playback mode, press for fast reverse playback. In TV mode, press to add or delete a channel from the stored channel list.

25.0-9 NUMBER These buttons are used for numeric entry in many different menus.BUTTONS In addition, in Radio Mode (when RDS is engaged), 0 serves as the

TA button and 9 serves as teh AF button.

26.+10 BUTTON This button is used with the other number buttons for use withtwo-digitnumber entries.

27. RADIO PRESET BUTTONS

Preparing the Remote Control

Inserting the Battery

1.Press the release catch on the battery drawer in the direction shown in the picture below ( 1 ) . Then with your fingertip pull the drawer out (2 ).

2.Take careful note of the polarity of the battery before you remove it.

The (+) terminal must be UP as shown in the picture below ( 3 ).

3. Insert a new battery, and push in the battery drawer until you feel a "click." ( 4 )

Using the Remote Control

When you use the remote, be sure to be no more than six feet from the IR receiver on the unit, and within 30º to the left or right of the IR window. Beyond these ranges, the remote control may not communicate properly with the unit.

10