BOSS 630UA User Manual

630UA

MP3-CompatibleAM/FM CD Receiver

U S E R ’ S M A N U A L
CONTENTS
Installation	2
DIN front-mountinstallation	3
DIN rear-mountinstallation	4
Removing the head unit	4
Detaching the front panel	5
Replacing the front panel	5
General controls	6
Radio controls	7
Audio controls	8
CD/MP3 Playback controls	9
How to select MP3 files	10
Controls behind faceplate	10
USB and Front side AUX IN operations	11
Remote control functions	12
Wiring diagram	13
Troubleshooting	14
Specifications	15

3309(630UA) -IM.indd1

12/12/06 12:24:33 PM

3309(630UA) -IM.indd2

12/12/06 12:24:34 PM

3309(630UA) -IM.indd3

12/12/06 12:24:35 PM

Before removing the bezel, press the

RELEASE button to remove the front panel.

	press RELEASE to release	Release Button
	the front panel...

3309(630UA) -IM.indd4

12/12/06 12:24:36 PM

	press RELEASE to release	Release Button
	the front panel...

3309(630UA) -IM.indd5

12/12/06 12:24:37 PM

Front panel controls

GENERAL CONTROLS

POWER Press any button to turn unit ON. To turn head unit off, press and hold POWER.

RELEASE Press to release and remove the front panel.

DISP Selects radio frequency or clock display.

To set the clock:

1.With clock display selected, hold down (DISP) button until clock display starts flashing.

2.Rotating VOL left to change minutes, VOL right to change hours.

3.Press (DISP) button to start clock

AUX IN

The Liquid Crystal Display will display the current state of the unit.

BEEP MODE When press the AUDIO button for more than 2 seconds, it is activated as selecting mode of these function.

2 sec.

AUDIO	ESP	AUDIO MULTI AUDIO	BEEP	VOL	BEEP ON/OFF

BEEP ON: BEEP sound can hear from speaker when the buttons are pressed.

3309(630UA) -IM.indd6

12/12/06 12:24:39 PM

RADIO CONTROLS

AS/PS Select six strong stations and store them in current band.

1.Select a band (if needed)

2.Hold A/PS button for more than three seconds. The new stations replace stations already stored in that band.

Preset Scan

Scan stations stored in current band

1.Select a band (if needed)

2.Touch A/PS for more than one second but less than three seconds. Radio pauses for five seconds at each station. Touch A/PS again to stop scanning when desired station is reached.

SCAN This key is operated as RADIO SCAN. The operation is similar as normal search but different thing is holding 5 seconds on every station detected in RADIO SCAN mode.

BAND Push this switch to select the desired band. Selection is made in regular sequence as FM-AM.

AUX IN

STATION PRESETS Six numbered preset button store and recall stations for each band.

Storing a station:

1.Select a band (if needed)

2.Select a station

3.Hold a preset button longer than one second. Preset station number appears in the display when station is saved.

Recall a station:

1.Select band (if needed)

2.Press a preset button for less than one second to select stored station.

TUNE BUTTONS When pressed for less than 1 second, these keys operate as manual tuning mode.

When pressed longer than 1 sec., they are operated as SEEK tuning mode. If the keys are not pressed for 3 seconds, they will return to SEEK mode again.

SETTINGS MODE When press this button for more than 2 seconds, it is activated as selecting mode of these function.

2 sec.

AUDIO	ESP	AUDIO MULTI AUDIOBEEP AUDIO SEEK	VOL	SEEK1 / SEEK 2

SEEK 1: Normal seek mode for the next radio station.

SEEK 2: User can bypass frequencies by holding down the button or.

Seek will only begin when this button is released.

3309(630UA) -IM.indd7

12/12/06 12:24:40 PM

Front panel controls

AUDIO CONTROLS

EQ Press repeatedly to cycle through five modes: POP M, ROCK M,

CLASS, FLAT M or DSP OFF.

SUB Press and hold to engage subwoofer output.

LOUD Press this button to increase the level of bass output.

AUX IN

MUTE Press to silence the receiver. Press again to return to normal operation.

SOURCE By pressing this key, user can select AUX/TUNER/CD-

MP3/USB mode.

AUDIO BUTTON and ROTARY CONTROL Press the button repeatedly to access Volume, Bass, Treble, Balance and Fader functions. Then use the knob to adjust the selected function.

3309(630UA) -IM.indd8

12/12/06 12:24:40 PM

CD/MP3 PLAYBACK CONTROLS

EJECT Press to eject CD

AUX IN

TUNE/TRACK BUTTONS Press and release to advance to next track or to return to the beginning of the current track (track number will be displayed). Press and hold to fast forward or reverse. Play will begin at the point when you release the button.

PAUSE Press to pause CD playback. Press again to resume playback

ESP MODE When press AUDIO button for more than 2 seconds, it is activated as 12 sec. or 45 sec. of ESP mode can be selected.

2 sec.

AUDIO	ESP	VOL	ESP 12s. / 45s.

+10 10 TRACK UP SELECT: (In case of MP3 files)

-1010 TRACK DOWN SELECT: (In case of MP3 files)

SHUFFLE Press to play ALL tracks on the CD in random order.

REPEAT Press and release to continuously repeat same track. Press again to stop repeat cycle.

CD SCAN Press to hear first several seconds of each track on current disc. Press again to stop intro and listen to intro last previewed.

CD/MP3 Operation

To PLAY a CD gently insert a CD with the label side up into the disc slot. It will automatically load and begin playing the first track.

To EJECT a CD press EJECT to stop the CD playback and eject the CD from the slot. The receiver will automaticvally switch to radio mode.

To PAUSE a CD press PAUSE to stop playback temporarily. Press again to resume playback.

To SKIP TRACKS press theorkey to choose the next or preceding track.

To FAST FORWARD or REVERSE press and hold theorkey to the desired location on the disc. Releasing the button starts playback at the location.

To REPEAT a TRACK press REPEAT to continuously repeat the current track. Press again to return to normal playback mode.

To PREVIEW ALL TRACKS press CD SCAN to play the first several seconds of each track. Press it again to stop an play the current track being previewed.

To PLAY TRACKS IN RANDOM ORDER press SHUF to play ALL tracks on the CD in random mode. Press again to cancel this function.

3309(630UA) -IM.indd9

12/12/06 12:24:41 PM

Front panel controls

How to select MP3 files

Searching Track:

•Press “AS/PS”, then search track is activated.

•Press “AUDIO” button, then the first digit will flash.

•Rotary “VOL knob to right or left”, select first digit desired.

•Press “AUDIO” button, then the first digit is fixed and second digit will flash.

•Rotary “VOL knob to right or left”, select 2’nd 3’rd respectively.

•Then automatically the song selected will start.

Searching File Name:

•Press “AS/PS” twice, then file search is activated.

•Press “AUDIO” button, then the first directory is displayed.

•Rotary “VOL knob to right or left”, you can select the desired directory.

•Press “AUDIO” button again, then the directory is fixed and the first file name is displayed.

•Rotary “VOL knob to right or left”, you can select the file you want.

•Press “AUDIO” button, then the song selected will start.

Searching Character:

•Press “AS/PS” 3 times, then character search mode is activated.

•Press “AUDIO” button, then “A” character is displayed.

•Rotary “VOL knob to right or left”, you can select the desired letter.

•Press “AUDIO” button longer than 2 sec.

•The song with the same character you selected is displayed.

•Rotary “VOL knob to right or left”, you can select the desired song.

•Press “AUDIO” button, then the song selected will start.

Controls behind faceplate

AUX IN

RESET

CD Loading/unloading slot

LED This LED flashes when the faceplate is removed.

RESET Press this button with a ballpoint pen or other thin object.

The reset button is to be activated for the following reason:

Initial installation of the unit when all wiring is completed.

All the function button do not operate.

Error symbol on the display.

NOTE: If the unit does not function properly after you have pressed the RESET button, clean the socket and the connector on the rear of the front panel with a cotton swab soaked in isopropyl alcohol and try again.

10

3309(630UA) -IM.indd10

12/12/06 12:24:41 PM