Bose SoundDock 10, SDOCK10BT User Manual

0 (0)

SoundDock® 10

Bluetooth Dock

Owner’s Guide | Brugervejledning | Bedienungsanleitung | Guía de usuario | Omistajan opas Notice d’utilisation | Felhasználói útmutató | Manuale di istruzioni | Gebruiksaanwijzing

Podręcznik użytkownika | Bruksanvisningen | | | |

English

Safety information

Please read this owner’s guide

Please take the time to follow the instructions in this owner’s guide carefully. It will help you set up and operate your system properly and enjoy its advanced features. Please save this owner’s guide for future reference.

WARNINGS:

To reduce the risk of fire or electrical shock, do not expose the product to rain or moisture.

Do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on or near the apparatus. As with any electronic products, use care not to spill liquids into any part of the system. Liquids can cause a failure and/or a fire hazard.

Do not place any naked flame sources, such as lighted candles, on or near the apparatus.

Contains small parts that may be a choking hazard. Not suitable for children under age 3.

Notes:

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations (Canada only).

The product must be used indoors. It is neither designed nor tested for use outdoors, in recreation vehicles, or on boats.

Bose Corporation hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1995/5/CE

(R&TTE directive) and other applicable Directives. The detailed Declaration of Conformity can be found on www.Bose.com/compliance.

Temperature range for use: 0°-45°C (32°-113°F)

2

English

NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, this is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment to an outlet on a different circuit than the one to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

This device complies with FCC and Industry Canada RF radiation exposure limits set forth for general population. It must not be co-located or operating in conjunction with any other antenna or transmitter.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

3

Bose SoundDock 10, SDOCK10BT User Manual

English

Overview

The Bose® SoundDock® 10 Bluetooth® dock adds Bluetooth wireless technology capability to your SoundDock 10 digital music system. After installing this accessory, you can listen to your stereo Bluetooth music phone with high-quality, room-filling sound. To experience the intended performance, your stereo Bluetooth music phone must support the Bluetooth Advanced Audio Distribution Profile (A2DP).

Installing the Bluetooth dock

1.Disconnect the SoundDock 10 system power cord from the AC outlet.

2.Lift up the back edge of the universal dock adapter (A) and remove it from the dock. You may need to insert a thin non-metallic utensil into the slot to provide the required leverage to lift the back edge.

A

B

C

3.Press the dock release button (B) on the right and lift up (C) the right side of the dock to remove it. There is a small indent on the button if you need to use a pen to press the button in far enough to fully release the dock.

4

English

4. Slide the left end of the Bluetooth® dock into the dock opening (A).

A

B

5. Press down on the right side of the dock until it locks in place (B).

Making the first connection

1.Plug the power cord of the SoundDock® 10 digital music system into an AC outlet.

2.Wait until the Bluetooth light starts slowly flashing, meaning that the Bluetooth dock is in discoverable mode.

NOTE: The dock stays in discoverable mode (up to 30 minutes with first-time use) until you connect your stereo Bluetooth music phone to it.

Bluetooth light

(flashing = discoverable mode)

5

Loading...
+ 9 hidden pages