Bose 369946-1300 User Manual

Size:
511.86 Kb
Download

Bose® SoundLink®

Bluetooth­® speaker III

Owner’s Guide

Safety

Please read this guide

Please take the time to follow the instructions in this owner’s guide carefully. It will help you set up and operate your system properly and enjoy its advanced features. Please save this guide for future reference.

The lightning flash with arrowhead symbol within an equilateral triangle alerts the user to the presence of uninsulated, dangerous voltage within the system enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle, as marked on the system, is intended to alert the user to the presence of important operating and maintenance instructions in this owner’s guide.

WARNINGS:

• To reduce the risk of fire or electrical shock, do not expose the product to rain or moisture.

Do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on or near the apparatus. As with any electronic products, use care not to spill liquids into any part of the system. Liquids can cause a failure and/or a fire hazard.

Do not place any naked flame sources, such as lighted candles, on or near the apparatus.

Do not use any charger other than that specifically provided for use with the equipment.

The battery needs to be charged before use. Always use the correct charger and refer to the ­manufacturer’s instructions or equipment manual for proper charging instructions.

After extended periods of storage, it may be necessary to charge and discharge the battery pack several times to obtain maximum performance.

The battery pack gives its best performance when it is operated at normal room temperature (68°F +/- 23°F or 20°C +/- 5°C).

Do not leave a battery on prolonged charge when not in use.

The battery pack shall not be exposed to excessive heat such as sunshine, fire or the like.

Do not subject battery pack to mechanical shock.

In the event of fluid from the battery leaks from the equipment, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.

Do not use any battery pack which is not designed for use with the equipment.

Keep battery pack clean and dry.

For battery replacement, please contact Bose Customer Service.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Bose Corporation is under license.

Wi-Fiis a registered mark of theWi-FiAlliance.

©2013 Bose Corporation. No part of this work may be reproduced, modified, distributed, or otherwise used without prior written permission.

2 - English

Safety

WARNING: This product contains magnetic material. Please contact your physician if you have any questions on whether this might affect the operation of your implantable medical device.

CAUTION: Make no modifications to the system or accessories. ­Unauthorized alterations may compromise safety, regulatory­ compliance, and system performance.

NOTES:

The product label is located on the bottom of the product.

Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily operable.

The AC power supply provided with this product must be used indoors. It is neither designed nor tested for use outdoors, in recreation vehicles, or on boats.

This product is intended to be used only with the AC power supply provided, or a Bose® AC power supply or charger designed for use with this product.

Important Safety Instructions

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with a dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9.Only use attachments/accessories specified by the ­manufacturer.

10.Unplug this apparatus during lightning storms or when unused for long periods of time.

11.Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supplycord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has

been dropped.

Information about products that ­generate electrical noise

This device complies with FCC and Industry Canada RF radiation exposure limits set forth for general population. It must not be co-locatedor operating in conjunction with any other antennas or transmitters.

This device complies with Part 15 of the FCC Rules. ­Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

English - 3

Safety

U.S.A. only

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by Bose ­Corporation could void the user’s authority to operate this equipment­ .

Canada

This Class B digital apparatus complies with Canadian ICES-003.

This device complies with Industry Canada licence-exemptRSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Output power: 7 mW @ 2400-2483.5MHz

Bose Corporation hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC and to all applicable EU directive requirements.

The complete declaration of conformity can be found at www.Bose.com/compliance

Names and Contents of Toxic or Hazardous Substances or Elements

Toxic or Hazardous Substances and Elements

Part Name

Lead

Mercury

Cadmium

Hexavalent

Polybrominated

Polybrominated Diphenyl

(Pb)

(Hg)

(Cd)

(CR(VI))

Biphenyl (PBB)

Ether (PBDE)

PCBs

X

0

0

0

0

0

Metal

X

0

0

0

0

0

parts

 

 

 

 

 

 

Plastic

0

0

0

0

0

0

parts

 

 

 

 

 

 

Speakers

X

0

0

0

0

0

Cables

X

0

0

0

0

0

O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T 11363-2006.

X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ/T 11363-2006.

Please complete and retain for your records.

The serial and model number can be found on the bottom of the speaker.

Serial number: ____________________________________________________________________

Model number: ___________________________________________________________________

Purchase date: _ __________________________________________________________________

We suggest you keep your receipt with this owner’s guide.

4 - English

 

Contents

Introduction

 

Overview..............................................................................................................

6

Unpacking............................................................................................................

6

Operation

 

Connecting to AC power...................................................................................

7

Pairing and connecting a device to the speaker..........................................

9

First-timesetup..........................................................................................

9

Adding another device to the speaker....................................................

10

Speaker memory.........................................................................................

10

Reconnecting a device...............................................................................

10

Switching to a different device................................................................

10

Control buttons..................................................................................................

11

System status indicators..................................................................................

12

Connecting a device using the AUX connector............................................

13

Operating on battery power.............................................................................

14

Checking the battery..................................................................................

14

Charging the battery..................................................................................

14

Battery protection mode...........................................................................

14

Tips on placing the speaker..............................................................................

15

Maintenance and Care

 

Troubleshooting.................................................................................................

16

Replacing the battery........................................................................................

18

Cleaning the speaker.........................................................................................

18

Contacting customer service...........................................................................

18

Technical information.......................................................................................

18

English - 5

Introduction

Overview

Thank you for purchasing the Bose® SoundLink® Bluetooth® speaker III. Enjoy music wirelessly from your smartphone, tablet, laptop, or otherBluetooth device anywhere you choose.

Features

Wireless Bluetooth link eliminates the need to physically connect your

Bluetooth device.

Rechargeable lithium-ionbattery provides hours of Bose performance.

AUX connector lets you connect any music device directly to your speaker.

Pair up to six Bluetooth devices.

Easy grab-and-gomobility.

Unpacking

Open the carton and remove the speaker and AC power supply. Depending on your region, the carton may also contain AC power adapters for the AC power ­supply. Be sure to save all of the packing materials. These provide the safest means for any ­necessary shipping or transporting of the system.

If any part of the product appears to be ­damaged, do not attempt to use it. Contact your authorized Bose dealer immediately or call Bose Customer Service. For ­contact information, refer to the contact list at the end of this guide or visit http://global.Bose.com.

SoundLink® Bluetooth® speaker III

AC power supply

AC power supply

 

 

adapters

6 - English

Operation

Connecting to AC power

The first time using your SoundLink® Bluetooth® speaker III, connect it to AC (mains) power and charge the battery for three hours. While the battery is charging, you can begin using the speaker.

1.Depending on your AC power supply type:

a. Extend the prongs from the AC power supply.

Or,

b.Slide the AC power adapter for your region onto the AC power supply.

English - 7

Operation

2.Plug the power cord on the AC power supply into the DC connector on the back of the speaker.

3.Plug the AC power supply into a live AC (mains) outlet.

The speaker emits a tone to confirm connection to AC power, and ­charging

begins. On the front of the speaker, the battery status indicator blinks ­yellow to show the battery is charging.

8 - English

Operation

Pairing and connecting a device to the speaker

Before listening to music from your Bose® Soundlink® Bluetooth® speaker III, you must pair and connect yourBluetooth device to the speaker.

First-timesetup

The first time you turn on your speaker, it is ready to pair and connect your first device.

1.Press Power to turn the speaker on.

The Bluetooth­ status indicator on the speaker blinks blue to show the speaker is discoverable.

2.On your device, turn Bluetooth on, locate theBluetooth device list, and select the ­device named “Bose SLIII.” If your device prompts you for a passcode, enter “0000” (four zeros).

Settings

Bluetooth

Bluetooth

ON

Devices

 

 

Bose SLIII

Connected

When pairing is complete and your device is connected to the speaker, the Bluetooth­ status indicator on the speaker changes from blinking blue to solid white and the speaker emits a tone.

Note: If the speaker turns off after five minutes, it has not paired or connected with your device. Turn the speaker off and back on, and try pairing your device again. See “Troubleshooting” on page 16.

English - 9

Operation

Adding another device to the speaker

Pair another device to the speaker by making the speaker discoverable.

1. PressBluetooth® on the speaker, so theBluetooth status indicator blinks blue.

2.On your device, turn Bluetooth on, locate theBluetooth device list, and select the ­device named “Bose SLIII.” If your device prompts you for a passcode, enter “0000” (four zeros).

When the device connects to the speaker, the Bluetooth­ status indicator turns to solid white.

Note: You can switch between connecting/connected and discoverable by pressingBluetooth on the speaker.

Speaker memory

The speaker can remember up to six paired devices. If you pair the speaker with an additional device, the device least recently connected is no longer paired with the speaker.

Note: To clear the speaker memory of all devices, press and holdBluetooth (about 10 seconds) until you hear a tone. All devices are cleared and the speaker becomes discoverable.

Reconnecting a device

When turned on, the speaker attempts to reconnect with a device in memory ­starting with the last connected device. If the last connected device is not ­available, the speaker connects to the next to last connected device, and so forth. The speaker searches for a paired device for approximately 30 seconds.

Switching to a different device

You can switch the speaker from your connected device to another previously paired ­device. The device you are switching to must be in the speaker memory.

1.On your previously paired device, make sure Bluetooth is turned on.

2.Press Bluetooth on the speaker to make the speaker discoverable.

The Bluetooth status indicator speaker blinks blue to show the speaker is discoverable.

3.On your device, select “Bose SLIII” from the Bluetooth device list.

The Bluetooth status indicator blinks white, while the speaker attempts to connect to the device.

When the speaker and Bluetooth device have ­successfully connected, theBluetooth­ status indicator changes from blinking to solid white and the speaker emits a tone.

10 - English