Bose 329198-1100 User Manual

Size:
3.29 Mb
Download

CINEMATE® 1 SR

DIGITALHOMETHEATERSPEAKERSYSTEM

Operating Guide | Guía del usuario | Guide d’utilisation

Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment to an outlet on a different circuit than the one to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by Bose Corporation could void the user’s authority to operate this equipment.

These devices comply with FCC and Industry Canada RF radiation exposure limits set forth for the general population. They must not be co-locatedor be operating in conjunction with any other antennas or transmitters.

These devices comply with Industry Canada license-exemptRSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device.

CAUTION: Refer to the CineMate® 1 SR setup guide forsafety-relatedinformation.

Please complete and retain for your records:

Speaker array serial number (on bottom panel): __________________________________

Acoustimass module serial number (on back panel): ______________________________

Manufactured under license from Dolby Laboratories. Dolby and the double-Dsymbol are trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent #’s: 5,956,674; 5,974,380 and

6,487,535 & other worldwide patents issued & pending. DTS, the DTS Symbol and DTS + the DTS Symbol are registered trademarks & the DTS logos are

trademarks of DTS, Inc. Product includes software. ©2010 DTS, Inc. All Rights Reserved.

©2011 Bose Corporation. No part of this work may be reproduced, modified, distributed, or otherwise used without prior written permission.

2 – English

 

CONTENTS

CONTROLS ANDINDICATORS

4

Universal remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . 4

Basic functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . 4

Turning the system on and off . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . 4

Controlling the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . 4

Programming the universal remote . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . 4

Reading the system indicators . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . 6

Adjusting the bass level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . 6

CONTROLLINGSOURCES

7

Changing the source control mode . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . 7

Watching TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . 8

Watching a DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . 9

Navigating on-screenmenus and guides . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . 10

Using playback controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . 11

CARE ANDMAINTENANCE

12

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Replacing the remote batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Cleaning your speaker system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Customer service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Limited warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Technical information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

English – 3

CONTROLS ANDINDICATORS

Universal remote control

The CineMate® 1 SR system includes a universal remote that can be programmed to control your TV, DVD orBlu-rayDisc™ player, cable/satellite box, and VCR. With this universal remote, you can enjoy the convenience of using only one remote control for all your home theater equipment.

Basic functions

Turning the system on and off

The system power button turns the CineMate 1 SR system on or off.

Controlling the volume

Press this button to mute or unmute the audio:

Use this button to change the volume level:

• Press + to raise the volume.

• Press to lower the volume.

Note: Make sure the internal speakers in your TV are turned off. To confirm, press Mute on the Bose remote and check that no sound is coming from the TV. For more information, refer to “Turning off the internal speakers in your TV” in the Setup Guide.

Programming the universal remote

The universal remote can be programmed to control up to five audio/video devices.

To program the remote to control your TV:

1.Locate the TV section in the Universal Remote Device Codes book included with your system.

2.Locate the device code(s) for your brand of TV and select a code from the list.

4 – English

CONTROLS ANDINDICATORS

3.Press and hold until all five source buttons light. The remote is now in the setup mode.

4.Press . Only this button will remain lit.

5.On the number keypad, enter the device code for

your brand of TV. The TV source button () should blink twice and then turn off.

Note: If all five source buttons flash rapidly three times, the code was invalid. Go back to Step 1 and try another code.

6. Point the remote at your TV and press TV power.

Source buttons

Source power buttons

TV power

If your TV does not respond, go back to Step 1 and try another code.

To program the remote to control other devices:

Follow the same procedure for each of your other devices, using the appropriate device code and source button for each one.

To control a combination device:

• If you are programming the remote to control a combination device that has more than one source,

such as a VCR/DVD unit, you can program the associated code for either source button. For convenience, you may want to program the code twice – once for the VCR button and once for the DVD button.

To find the right device code, first search the “COMBINATION” listings in the Universal Remote Device Codes book. If you cannot find a valid code there, then search the listings for individual device types (TV, CBL, VCR, DVD, etc.).

English – 5

CONTROLS ANDINDICATORS

Reading the system indicators

Speaker array indicators

 

 

Status

 

 

 

Power

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Power indicator:

 

 

 

 

 

 

Solid white.....................................

Power on

 

 

Fast blinking white ........................

System is muted

Very fast blinking white.................

System volume has reached the max or min limit

Status indicator:

 

 

 

 

 

 

Off ..................................................

Speaker array and Acoustimass® module are connected

Slow blinking orange ....................

Speaker array is available to make a wireless connection

Fast blinking orange .....................

Speaker array is disconnected and trying to connect

Solid green ....................................

ADAPTiQ® system is activated

Blinking green ...............................

ADAPTiQ system is calculating data

Blinking green 5 secs....................

AC power applied

Solid red ........................................

System error

Acoustimass module indicator

Status

**

 

 

 

 

Bass control knob

 

 

 

 

 

 

*For service use only

Status indicator:

 

 

 

Solid orange...................................

Speaker array and Acoustimass module are connected

Blinks orange every 3 secs ...........

Acoustimass module is disconnected from speaker array

 

 

(or speaker array is off: Acoustimass module standby)

Slow blinking orange.....................

Acoustimass module is available to make wireless connection

Solid red.........................................

System error

Adjusting the bass level

The bass control knob located on the rear of the Acoustimass module allows you to change the bass level output of the system. Turn the bass control knob clockwise to increase the bass, counter-clockwiseto decrease the bass.

6 – English

CONTROLLINGSOURCES

Changing the source control mode

You can easily switch control from one source to another by pressing the appropriate source button at the top of the remote. In addition to controlling the selected source, the remote will always control the basic speaker functions (on/off, volume, mute) of your CineMate® 1 SR system.

To control a source:

1.Press the power button () for the source you want to turn on.

2.Press the button for the source you want to control. The source button will flash to verify your choice.

3.If necessary, Press the TV Input button to select the correct input on your TV.

You may need to press the TV Input button several times in order to select the correct TV input for the source you want to watch.

On some TVs, the TV Input button will display an onscreen menu. Put your Bose remote in the TV control mode to navigate and close this menu.

Note: To control your TV and other devices using the Bose remote, you must first program the remote with a device code for each device. See “Programming the universal remote” on page 4.

Selects the input on your TV to the source you want to watch.

Puts the remote in TV control mode. Allows you to control TV functions, such as channel selection and menu navigation.

Puts the remote in control of your cable or satellite set top box. Allows you to control cable/satellite set-topbox functions, such as channel selection and Electronic Program Guide navigation. If your cable/satellite box includes a Digital Video Recorder (DVR), the remote will control both cable/satellite and DVR functions.

Puts the remote in control of your Blu-rayDisc™, DVD or CD player. Allows you to control the functions in the player you are

using.

Puts the remote in VCR control mode. Allows you to control VCR functions, such as play options and menu navigation.

Puts the remote in control of the additional device that does not have a dedicated remote source button. Allows you to control the functions of the source designated as the AUX source.

Source power buttons. Press to turn the corresponding source on or off.

English – 7

CONTROLLINGSOURCES

Watching TV

To watch TV using your cable/satellite set-topbox:

1. Press theTV power button to turn on your TV.

TV power

2.Press the TV Input button to select the correct input on your TV.

3.Press the CBL-SAT power button to turn on your cable/satelliteset-topbox.

CBL-SATpower

4.Press the CBL-SAT source button to switch to cable/satellite mode.

CBL-SATsource

The CBL-SAT button flashes to verify that the remote is in theCBL-SATmode.

5.Select a channel:

Press to go up one channel

Press to go down one channel

Enter a channel numberon the keypad to go to aspecific channel

Press to return to the last channel selected

To view and search through program guides, see “Navigating on-screenmenus and guides” on page 10.

8 – English

CONTROLLINGSOURCES

To watch TV using the tuner in your TV:

1.Press the TV power button to turn on your TV.

TV power

2.Press the TV Input button to select the correct input on your TV.

3.Press the TV source button to switch to the TV mode (theTV button will flash).

TV source

4.Select a channel.

Watching a DVD or Blu-Ray™disc

1. Press theTV power button to turn on your TV.

TV power

2.Press the TV Input button to select the correct input on your TV.

3.Press the BD-DVD power button to turn on your DVD player.

BD-DVDpower

4.Press the BD-DVD source button to switch to DVD mode.

BD-DVDpower

The BD-DVD button flashes to verify that the remote is in theBD-DVDmode.

5.Use the remote to control playback functions and navigate disc or player menus. See “Using playback controls” on page 11 for a description of the playback buttons.

English – 9

CONTROLLINGSOURCES

Navigating on-screenmenus and guides

The menu and program selection buttons will control only one source at a time. Select the source you want to use first.

Note: If some navigation functions are not working for a particular source, try programming a different device code into the remote.

Exits onscreen menus and program guides

Skips ahead one page in an onscreen program guide

Skips back one page in an onscreen program guide

• Switches between normal and widescreen picture, or

If supported, turns Teletext mode on or off

Displays the menu of the selected source

Displays details of items in an electronic program guide

Displays an electronic program guide when available

Moves the selection highlight up, down, left, or right

Confirms a menu selection or skips to the next level of menu items

Perform specific functions in theCBL-SATand Teletext(Europe only) modes

10 – English