Bose 320573-1100 User Manual

Size:
3.05 Mb
Download

CINEMATE® SERIESII

CINEMATE® GS SERIESII

D I G I T A L H O M E T H E A T E R S P E A K E R S Y S T E M

Owner’s Guide

Guía de usuario

Notice d’utilisation

Guia dos proprietários

Svenska

Nederlands

FrançaisItalino

EspañolDeutsch

English

 

 

 

 

 

SAFETYINFORMATION

Please read this guide

Please take the time to follow the instructions in this guide carefully. It will help you set up and operate your system properly and enjoy all of its advanced features. Please save this guide for future reference.

The interface module is to be used only with the Acoustimass® module in the CineMate® system.

WARNING: To reduce the risk of fire or electrical shock, do not expose the product to rain or moisture.

WARNING: Do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on or near the apparatus. As with any electronic products, use care not to spill liquids into any part of the system.

Liquids can cause a failure and/or a fire hazard.

WARNING:

The lightning flash with arrowhead symbol within an equilateral triangle alerts the user to the presence of uninsulated, dangerous voltage within the system enclosure that may be of sufficient magnitude to constitute a risk of electrical shock.

The exclamation point within an equilateral triangle, as marked on the system, is intended to alert the user to the presence of important operating and maintenance instructions in this owner’s guide.

Please dispose of used batteries properly, following any local regulations. Do not incinerate.

WARNING: Do not place any naked flame sources, such as lighted candles, on or near the apparatus.

This product conforms to the EMC Directive 2004/108/EC and to the Low Voltage Directive 2006/95/EC. The complete Declaration of Conformity can be found at www.Bose.com/static/compliance/index.html.

Note: Where the mains plug is used as the disconnect device, such disconnect device shall remain readily operable.

Note: This product must be used indoors. It is neither designed or tested for use outdoors, in recreation vehicles, or on boats.

Additional Safety Information

See the additional instructions on the Important Safety Instructions sheet (North America only) enclosed in the shipping carton.

For your records

The serial number is located on the rear of the Acoustimass module.

Serial number: ______________________________________________

Dealer name: _______________________________________________

Dealer phone: _______________________________________________

CAUTION: Make no modifications to the system or accessories. Unauthorized alterations may compromise safety, regulatory compliance, and system performance.

WARNING: Keep the remote control battery away from children. It may cause a fire or chemical burn if mishandled. Do not recharge, disassemble, heat above 100ºC (212ºF), or incinerate. Dispose of used batteries promptly. Replace only with a battery of the correct type and model number.

WARNING: Danger of explosion if battery is incorrectly replaced. CineMate series IIremote—Replaceonly with Duracell, Eveready, Energizer, Maxell, Toshiba, or Shun Wo CR2032 or DL20323-voltlithium battery.

Purchase date: ______________________________________________

We suggest you keep your sales receipt and product registration card together with this owner’s guide.

©2009 Bose Corporation. No part of this work may be reproduced, modified, distributed, or otherwise used without prior written permission.

ii

English

DeutschEspañol

FrançaisItliano

Nederlands

Svenska

 

 

 

 

 

CONTENTS

INTRODUCTION

2

 

Before you begin . . . . . . . . . . . . . . . . . . . . .

2

 

Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . .

3

SYSTEMSETUP

4

1

Placing the system components . . . . . . . . . . . . .

4

2

Connecting the speakers to the

 

 

Acoustimass® module . . . . . . . . . . . . . . . . . . . .

7

3

Connecting the interface module . . . . . . . . . . . .

9

4

Connecting the TV audio to the interface module

10

 

Connecting optical audio . . . . . . . . . . . . . . . . .

10

 

Connecting analog audio . . . . . . . . . . . . . . . . .

11

 

Turning off the TV internal speakers . . . . . . . . .

11

5

Connecting to a power outlet . . . . . . . . . . . . . . .

12

6

Inserting the CineMate® GS remote batteries . .

14

CONTROLS ANDINDICATORS

15

 

Acoustimass® module bass control . . . . . . .

15

 

CineMate® series II remote control . . . . . . . .

16

 

Using the remote to control the

 

 

CineMate system . . . . . . . . . . . . . . . . . . . . . . .

16

CineMate® GS series II remote control . . . . . 17

Using the remote to control the

CineMate® system . . . . . . . . . . . . . . . . . . . . . . . 18

Setting the remote for your TV and

other devices . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 To control a combination device . . . . . . . . . . . . 19 Using the remote to watch TV . . . . . . . . . . . . . . 19 Using the remote to watch a DVD . . . . . . . . . . . 20 Selecting the TV input . . . . . . . . . . . . . . . . . . . . 20

Switching control from one device

to another . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Using the CineMate® GS series II

remote control . . . . . . . . . . . . . . . . . . . . . . . 21

CARE ANDMAINTENANCE

25

Replacing the CineMate® series II

remote battery . . . . . . . . . . . . . . . . . . . . . . . 25

Replacing the CineMate® GS series II

remote batteries . . . . . . . . . . . . . . . . . . . . . . 26

Cleaning your speaker system . . . . . . . . . . . 26

Troubleshooting . . . . . . . . . . . . . . . . . . . . . .

27

Customer service . . . . . . . . . . . . . . . . . . . . .

28

REFERENCE

29

iii

Svenska

Nederlands

FrançaisItalino

EspañolDeutsch

English

 

 

 

 

 

INTRODUCTION

Before you begin

Thank you for purchasing the Bose® CineMate® system, which delivers the superb acoustic performance needed to enjoy the full audio impact of DVDs and other exciting home entertainment.

The CineMate system comes in two configurations:

CineMate series II – includes the standard CineMate speakers and a simple remote control.

CineMate GS series II – includes the smaller Gemstone® speakers and a universal remote control.

Both configurations include an attractive floor-standingAcoustimass® module for deep bass sound and an interface module that provides simple audio connections to your TV.

Using our TrueSpace® signal processing technology, the CineMate system speakers provide improved spaciousness for bold3-Deffects andmovie-likerealism from surround encoded DVDs and other entertainment sources. In fact, they provide much of the performance of premiumfive-speakersystems from a modest array of equipment.

Setup help

The CineMate system easily connects to your TV and other home theater equipment. To help you set up your CineMate system, the following items are provided:

Quick Setup Guide

Setup DVD

Detailed instructions in the Setup section of this owner’s guide

2

English

DeutschEspañol

FrançaisItliano

Nederlands

Svenska

 

 

 

 

 

INTRODUCTION

Unpacking

Carefully unpack your CineMate® system. Save all packing materials, which provide the safest way to transport your system. If any part of the system appears damaged, do not try to use it. Notify Bose or your authorized Bose dealer immediately. For Bose® contact information, refer to the address sheet included in the carton.

WARNING: To avoid danger of suffocation, keep the plastic bags out of the reach of children.

As you identify them, you may want to place a check mark in the box next to the name of each part.

Note: Now is a good time to find the serial number on the rear of the Acoustimass® module. Copy that number in the space provided on page ii for easy reference when registering your system.

Cinemate series II speakers OR

CineMate GS series II

Acoustimass module

Gemstone® speakers

Small rubber feet

Large rubber feet

CineMate series II remote

 

OR

 

Interface module

CineMate GS series II remote

Speaker cable

Power cord

Stereo cable

Optical cable

3

Svenska

Nederlands

FrançaisItliano

DeutschEspañol

English

 

 

 

 

 

SYSTEMSETUP

Placing 1 thecomponentssystem

What you need to use:

 

OR

CineMate® GS series II

CineMate series II speakers

Gemstone® speakers

 

 

Interface module

Acoustimass® module

The image below shows one of the many ways you can position your system.

3ft(1

more

Left

Right

See Steps 1-5for details.

4

English

DeutschEspañol

FrançaisItliano

Nederlands

Svenska

 

 

 

 

 

SYSTEMSETUP

1.On the bottom of each speaker, attach one set of small rubber feet.

2.Place the left and right speakers:

at least 3 feet (1 meter) apart

within 3 feet (1 meter) of the TV screen

near the front edge of any shelf

aimed straight ahead (not angled) to face the listening area.

3.On the legs of the Acoustimass® module, attach the large rubber feet.

4.Place the Acoustimass module:

at the same end of the room as the speakers and your TV

at least 3 feet (1 meter) from the TV to prevent interference with the screen

at least 2.5 feet (.8 meters) from audio or video tapes to prevent magnetic damage to them

within reach of the cable from the interface module and an AC (mains) power outlet

with the front port aimed out from or along a wall for balanced performance

hidden under a table, behind a sofa or chair, or behind drapes as preferred

NOT in an enclosure, on a bed, on a sofa, or on a surface that can block the ventilation openings.

CAUTION: Do not block ventilation openings on the bottom and rear of the module.

Note: Keep in mind that the Acoustimass module is the only part of this system that connects to a power outlet.

5

Svenska

Nederlands

FrançaisItliano

DeutschEspañol

English

 

 

 

 

 

SYSTEMSETUP

The interface module receives commands from the remote control and provides audio input connections for the CineMate® system. The remote control commands allow you to turn the speakers on, change the volume, and mute or turn off the speaker system.

5.Place the interface module:

on a flat surface near the TV and other home theater equipment

within 15 feet (4.6 meters) of the Acoustimass® module

NOT in direct sunlight

If you position the interface module on a shelf, make sure the front edge of the module is flush with the front edge of the shelf. If on a high shelf, make sure the front edge of the module extends slightly past the front of the shelf, so the shelf does not block signals from the remote control.

Peel the protective film off the lens on the front of the interface module.

Note: The remote should have a clear line of sight to the interface module, the TV, and any other equipment it will control.

CAUTION: When positioning the interface module, avoid blocking any ventilation openings on the TV or other electronic equipment.

Continue with 2 on the next page.

6

English

DeutschEspañol

FrançaisItliano

Nederlands

Svenska

 

 

 

 

 

SYSTEMSETUP

Connecting the 2 speakers to the

Acoustimass® module

What you need to use:

Speaker cable

 

OR

CineMate® GS series II

CineMate series II speakers

Gemstone® speakers

 

1.Notice the two plugs at one end of the speaker cable.

2.Separate the two plugs so each one reaches a speaker.

Acoustimass module

7

Svenska

Nederlands

FrançaisItliano

DeutschEspañol

English

SYSTEMSETUP

3.Insert each plug into the connector on the proper speaker.

The plug marked RIGHT goes into the speaker placed to the right of your TV (facing toward the TV).

(Refer to 1 for placement guidelines.)

4.Insert the single plug at the other end of the speaker cable into the connector labeled SPEAKERS on the back of the Acoustimass® module.

Fastener screws

5.Tighten each fastener screw by hand to secure the plug.

CAUTION: Do not plug the Acoustimass module into an AC power (mains) outlet until all other components are connected.

6. Continue with3 on the next page.

8