Bosch NDC-274-PM, NDC-274-P, NDC-274-PT, NDC-284-PT User Manual

0 (0)

MicroDome Camera 200 Series

NDC-274-P, NDC-274-PT, NDC-284-PT, NDC-274-PM

en Installation Manual

MicroDome Camera 200 Series

Table of Contents | en 3

 

 

 

Table of Contents

 

 

 

 

1

Safety

5

1.1

Safety precautions

5

1.2

Important safety instructions

6

1.3

FCC & ICES compliance

7

1.4

UL certification

8

1.5

Bosch notices

8

1.6

Copyrights

9

 

 

 

2

Introduction

10

2.1

Features

10

2.2

Unpacking

11

 

 

 

3

Installation

12

3.1

Disassembly

12

3.2

Memory card

13

3.3

Desiccant for rugged cameras

13

3.4

Network (and power) connector

14

3.5

Power connection

15

3.5.1

DC power connection

15

3.6

Mounting

16

3.7

Camera set-up

17

3.7.1

Camera positioning

18

3.8

Resetting the camera

19

3.9

Closing the unit

19

 

 

 

4

Browser connection

20

4.1

Protected network

20

 

 

 

5

Troubleshooting

21

5.1

Resolving problems

21

5.2

Customer service

22

 

 

 

6

Maintenance

23

6.1

Repairs

23

6.1.1

Transfer and disposal

23

Bosch Security Systems

Installation Manual

AR18-10-B012 | v1.55 | 2012.09

4 en | Table of Contents

MicroDome Camera 200 Series

 

 

 

 

 

 

7

Technical Data

24

7.1

Specifications

24

7.1.1

Accessories

26

AR18-10-B012 | v1.55 | 2012.09

Installation Manual

Bosch Security Systems

Bosch NDC-274-PM, NDC-274-P, NDC-274-PT, NDC-284-PT User Manual

MicroDome Camera 200 Series

Safety | en

5

 

 

 

1Safety

1.1Safety precautions

DANGER!

High risk: This symbol indicates an imminently hazardous situation such as "Dangerous Voltage" inside the product. If not avoided, this will result in an electrical shock, serious bodily injury, or death.

WARNING!

Medium risk: Indicates a potentially hazardous situation.

If not avoided, this could result in minor or moderate bodily injury.

CAUTION!

Low risk: Indicates a potentially hazardous situation.

If not avoided, this could result in property damage or risk of damage to the device.

Bosch Security Systems

Installation Manual

AR18-10-B012 | v1.55 | 2012.09

6 en | Safety

MicroDome Camera 200 Series

 

 

1.2Important safety instructions

Read, follow, and retain for future reference all of the following safety instructions. Heed all warnings on the unit and in the operating instructions before operating the unit.

1.Cleaning - Generally, using a dry cloth for cleaning is sufficient but a moist, fluff-free cloth or leather shammy may also be used. Do not use liquid cleaners or aerosol cleaners.

2.Heat Sources - Do not install the unit near any heat sources such as radiators, heaters, stoves, or other equipment (including amplifiers) that produce heat.

3.Water - Never spill liquid of any kind on the unit.

4.Lightning - Take precautions to protect the unit from power and lightning surges.

5.Controls adjustment - Adjust only those controls specified in the operating instructions. Improper adjustment of other controls may cause damage to the unit.

6.Power sources - Operate the unit only from the type of power source indicated on the label.

7.Servicing - Unless qualified, do not attempt to service this unit yourself. Refer all servicing to qualified service personnel.

8.Replacement parts - Use only replacement parts specified by the manufacturer.

9.Installation - Install in accordance with the manufacturer's instructions and in accordance with applicable local codes.

10.Attachments, changes or modifications - Only use attachments/accessories specified by the manufacturer. Any change or modification of the equipment, not expressly approved by Bosch, could void the warranty or, in the case of an authorization agreement, authority to operate the equipment.

AR18-10-B012 | v1.55 | 2012.09

Installation Manual

Bosch Security Systems

MicroDome Camera 200 Series

Safety | en

7

 

 

 

1.3FCC & ICES compliance

FCC & ICES Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

reorient or relocate the receiving antenna;

increase the separation between the equipment and receiver;

connect the equipment into an outlet on a circuit different from that to which the receiver is connected;

consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.this device may not cause harmful interference, and

2.this device must accept any interference received, including interference that may cause undesired operation.

Intentional or unintentional modifications, not expressly approved by the party responsible for compliance, shall not be made. Any such modifications could void the user's authority to operate the equipment. If necessary, the user should consult the dealer or an experienced radio/television technician for corrective action.

Bosch Security Systems

Installation Manual

AR18-10-B012 | v1.55 | 2012.09

8 en | Safety

MicroDome Camera 200 Series

 

 

The user may find the following booklet, prepared by the Federal Communications Commission, helpful: How to Identify and Resolve Radio-TV Interference Problems. This booklet is available from the U.S. Government Printing Office, Washington, DC 20402, Stock No. 004-000-00345-4.

1.4UL certification

Disclaimer

Underwriter Laboratories Inc. ("UL") has not tested the performance or reliability of the security or signaling aspects of this product. UL has only tested fire, shock and/or casualty hazards as outlined in UL's Standard(s) for Safety for Closed Circuit Television Equipment, UL 2044. UL Certification does not cover the performance or reliability of the security or signaling aspects of this product.

UL MAKES NO REPRESENTATIONS, WARRANTIES, OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.

1.5Bosch notices

Disposal - Your Bosch product was developed and manufactured with high-quality material and components that can be recycled and reused. This symbol means that electronic and electrical appliances, which have reached the end of their working life, must be collected and disposed of separately from household waste material. Separate collecting systems are usually in place for disused electronic and electrical products. Please dispose of these devices at an environmentally compatible recycling facility, per European Directive 2002/96/EC

More information

For more information please contact the nearest Bosch Security Systems location or visit www.boschsecurity.com

AR18-10-B012 | v1.55 | 2012.09

Installation Manual

Bosch Security Systems

MicroDome Camera 200 Series

Safety | en

9

 

 

 

1.6Copyrights

The firmware 4.1 uses the fonts "Adobe-Helvetica-Bold-R- Normal--24-240-75-75-P-138-ISO10646-1" and "Adobe- Helvetica-Bold-R-Normal--12-120-75-75-P-70-ISO10646-1" under the following copyright:

Copyright 1984-1989, 1994 Adobe Systems Incorporated. Copyright 1988, 1994 Digital Equipment Corporation. Permission to use, copy, modify, distribute and sell this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notices appear in all copies and that both those copyright notices and this permission notice appear in supporting documentation, and that the names of Adobe Systems and Digital Equipment Corporation not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission.

This software is based in part on the work of the Independent JPEG Group.

Bosch Security Systems

Installation Manual

AR18-10-B012 | v1.55 | 2012.09

Loading...
+ 19 hidden pages