Bogen HDO100 User Manual

BOGEN MICROPHONES
Models HDU250, HDU150, HDO100, MBS1000A, DDU250, GCU250, GDU150, MGN19, SCU250, WCU250
Introduction
Bogen’s line of microphones come in a variety of types and styles (handheld, desktop, gooseneck, boundary, and overhead hanging) to meet any and all application needs ranging from paging systems to instrument and vocal reproduction. Each is ruggedly constructed to withstand the demands of sound installations.
Each microphone provides clear, natural, intelligible sound reproduction with accurate response and dependable performance. Bogen’s microphone models are crafted with
Index |
|
Handhelds (HDU250, HDU150, HDO100).............................................................................................................................................................. | |
Desktops (MBS1000A, DDU250) .............................................................................................................................................................................. | 3 |
Goosenecks (GDU250, GCU150, MGN19) ............................................................................................................................................................ | |
Boundary (SCU250) ...................................................................................................................................................................................................... | 6 |
Overhead (WCU250) .................................................................................................................................................................................................... | 6 |
Accessories ...................................................................................................................................................................................................................... | 7 |
Architect and Engineer Specifications ........................................................................................................................................................................ | 8 |
HDU250 - Professional Stage
Description
The HDU250 is a dynamic microphone ideal for
Features
•Cardioid pickup pattern
•High sensitivity Neodymium capsule
•High output design with excellent gain before feedback characteristics
•High sound pressure capability without distortion and low sensitivity to breath/pop noise
•Efficient
•Rugged, reliable construction
•Integral
•
•Lockable, silent on/off reed switch
•Includes mic clip
Specifications |
|
MIC Type: | Handheld |
Element: | Moving coil dynamic |
Polar Pattern: | Cardioid |
Impedance: | |
Frequency Response: | 50 Hz to 18 kHz |
Sensitivity*: | |
S/N Ratio: | >65 dB |
Cable: | XLR Male |
Switch: | With |
| (lockable, silent reed switch) |
Dimensions: | 7" D x 2" Dia. |
Product Weight: | 1 lb. |
Material: | Zinc die cast |
Finish: | Rubberized black finish |
* (0dB=1V/ BAR 1,000 Hz indicated by open circuit)
Polar Graph
Frequency Response Graph
© 2003 Bogen Communications, Inc. Specifications subject to change without notice.

HDU150 - Handheld Stage
Description
The HDU150 is an attractive, dynamic, allpurpose microphone ideally suited for a wide variety of vocal and sound reinforcement applications.
Features
•Cardioid pickup pattern
•Crisp, clear sound
•Wide dynamic range with
•Rigid, low noise
•Low sensitivity to breath and popping sounds
•Durable
•Rubber
•Lockable, silent on/off reed switch
•Includes mic clip
Specifications |
|
MIC Type: | Handheld |
Element: | Moving coil dynamic |
Polar Pattern: | Cardioid |
Impedance: | |
Frequency Response: | 70 Hz to 15 kHz |
Sensitivity*: | |
S/N Ratio: | >65 dB |
Connector: | XLR Male |
Switch: | With |
| (lockable, silent reed switch) |
Dimensions: | |
Product Weight: | 1 lb. |
Material: | Zinc die cast |
Finish: | Rubberized black finish |
* (0dB=1V/ BAR 1,000 Hz indicated by open circuit)
Polar Graph
Frequency Response Graph
HDO100 - Public Address
Description
The HDO100 is an attractive, dynamic microphone
Features
•
•Uniform pickup of sound from all directions with no deterioration in frequency response
•Clean, clear reproduction with minimal ambient sound
•Low sensitivity to handling noise and stage vibrations
•Rugged, reliable construction
•Internal rubber shock isolation system
•Lockable, silent on/off reed switch
•Includes mic clip
Specifications |
|
MIC Type: | Handheld |
Element: | Moving coil dynamic |
Polar Pattern: | |
Impedance: | |
Frequency Response: | 70 Hz to 15 kHz |
Sensitivity*: | |
S/N Ratio: | >65 dB |
Connector: | XLR Male |
Switch: | With silent on/off switch |
| (lockable, silent reed switch) |
Dimensions: | |
Product Weight: | 1 lb. |
Material: | Zinc die cast |
Finish: | Rubberized black finish |
* (0dB=1V/ BAR 1,000 Hz indicated by open circuit)
Polar Graph
Frequency Response Graph
2

MBS1000A - Desktop Paging
Description
The MBS1000A is a dynamic,
Features
•
•
•Locking mechanism with
•Rubberized black finish with
•Contact closure leads
Specifications |
|
MIC Type: | Desktop |
Element: | Dynamic |
Polar Pattern: | Cardioid |
Impedance: | |
| |
Frequency Response: | 45 Hz to 15 kHz |
Sensitivity*: | |
| |
Cable: | 7' of |
Switch: | Locking |
| impedance selector |
Dimensions: | |
Product Weight: | |
Material: | ABS plastic |
Finish: | Rubberized black finish |
* (0dB=1V/ BAR 1,000 Hz indicated by open circuit)
Polar Graph
Frequency Response Graph
DDU250 - Dynamic Desktop
Description
The DDU250 is a
Features
•Cardioid pickup pattern
•16" long, fully flexible gooseneck stalk that is
•
•
•Excellent speech intelligibility with low ambient noise
•Effective feedback control
•Low sensitivity to breath and popping sound
•Slim, compact design to minimize distraction to the user
Specifications |
|
MIC Type: | Desktop |
Element: | Moving coil dynamic |
Polar Pattern: | Cardioid |
Impedance: | |
Frequency Response: | 100 Hz to 12 kHz |
Sensitivity*: | |
S/N Ratio: | >65 dB |
Cable: | 10 ft., |
Switches: | |
Dimensions: | |
Product Weight: | |
Material: | Zinc die cast |
Finish: | Matte black |
* (0dB=1V/ BAR 1,000 Hz indicated by open circuit)
Polar Graph
Frequency Response Graph
3

GCU250 - Condenser Gooseneck
Description
The GCU250 is a high performance,
Features
•Phantom
•Cardioid pickup pattern
•Clean, accurate vocal reproduction with low ambient noise
•
•Wide frequency response with rich treble and bass
•Thin, unobtrusive construction for
•Breath/wind filter included
•Durable
Specifications |
|
MIC Type: | Gooseneck |
Element: | Back electret condenser |
Polar Pattern: | Cardioid |
Impedance: | |
Frequency Response: | 50 Hz to 18 kHz |
Sensitivity*: | |
Max SPL @ 1% THD: | >130 dB |
S/N Ratio: | >65 dB |
Phantom Voltage Req: | 9V - 52V DC |
Connector: | XLR Male |
Dimensions: | |
Product Weight: | 4 oz. |
Material: | Copper |
Finish: |
* (0dB=1V/ BAR 1,000 Hz indicated by open circuit)
Polar Graph
Frequency Response Graph
GDU150 - Dynamic Gooseneck
Description
The GDU150 is a dynamic, gooseneck microphone that features a durable allmetal case with a
Features
•Cardioid pickup pattern
•Outstanding speech intelligibility,
feedback rejection, and user sound isolation
•High sound pressure capability and low sensitivity to breath/pop noise
•Superior
•Rugged, reliable construction
•Integral
•Durable
•Silent
Specifications |
|
MIC Type: | Gooseneck |
Element: | Moving coil dynamic |
Polar Pattern: | Cardioid |
Impedance: | |
Frequency: | 100 Hz to 12 kHz |
Sensitivity*: | |
S/N Ratio: | >65 dB |
Connector: | XLR Male |
Switch: | |
Dimensions: | 17" L x |
Product Weight: | 1 lb. |
Material: | Zinc |
Finish: |
* (0dB=1V/ BAR 1,000 Hz indicated by open circuit)
Polar Graph
Frequency Response Graph
4

MGN19 - Dynamic Gooseneck
Description
The MGN19 is a
Features
•
•
•Rugged, reliable design for quality,
•
•Contact closure leads
Specifications |
|
MIC Type: | Gooseneck |
Element: | Dynamic |
Polar Pattern: | |
Impedance: | |
Frequency Response: | 50 Hz to 12 kHz |
Sensitivity*: | |
Cable: | 7' of |
Switch: | |
Dimensions: | |
Product Weight: | |
Material: | Cycolac (housing) |
Finish: | Black Cycolac cap and housing; chrome |
| gooseneck and mounting flange |
* (0dB=1V/ BAR 1,000 Hz indicated by open circuit)
Polar Graph
Frequency Response Graph
5

SCU250 - Boundary
Description
The SCU250 is an unobtrusive,
Features
•Cardioid pickup pattern
•Full, rich reproduction of voice and music
•
•Low sensitivity to stage vibration and thumping noise
•Mounting keyways for hanging or for secure attachment to the mounting surface
•Excellent user sound isolation with excellent feedback rejection
•
•
Specifications |
|
MIC Type: | |
Element: | Back electret condenser |
Polar Pattern: | Cardioid |
Impedance: | |
Frequency Response: | 20 Hz to 18 kHz |
Sensitivity*: | |
S/N Ratio: | Over 65 dB |
Phantom Voltage Req: | 9V - 52V DC |
Cable: | 26 ft., quad cable |
Connector: | XLR Male |
Dimensions: | |
Product Weight: | 1 lb. |
Material: | Zinc die cast |
Finish: | Matte black finish |
* (0dB=1V/ BAR 1,000 Hz indicated by open circuit)
Polar Graph
Frequency Response Graph
WCU250 - Overhead Hanging
Description
The WCU250 is an electret condenser, professional microphone
it can hang from the ceiling and is compact in size, the WCU250 is very useful in minimizing visual distraction for the performers and the audience alike, and limits intrusion into the working space.
The WCU250 cable is terminated by a
Features
•Cardioid pickup pattern
•Utilizes a
•Transformerless,
•Clear, crisp sound with outstanding ambient noise isolation
•Wide frequency response with excellent
•Low profile, compact,
•Integrated metal hanger
Specifications |
|
MIC Type: | Overhead hanging |
Element: | Back electret condenser |
Polar Pattern: | Cardioid |
Impedance: | |
Frequency Response: | 50 Hz to 18 kHz |
Sensitivity*: | |
Max SPL @ 1% THD: | >130 dB |
S/N Ratio: | >65 dB |
Phantom Voltage Req: | 9V - 52V DC |
Cable: | 20 ft. quad cable |
Connector: | |
Dimensions: | |
Product Weight: | 5 oz. |
Material: | Copper |
Finish: | Matte black finish |
* (0dB=1V/ BAR 1,000 Hz indicated by open circuit)
Polar Graph
Frequency Response Graph
6

Accessories
CABLES
MAC - Microphone Cable Assembly
•For handheld models
•Female XLR to stripped and tinned wires
•25' cable
•
XLR25 - Microphone Cable
•For handheld models
•Male XLR to female XLR
•25'
•
CLIPS
MC27 - Handheld Clip
•For handheld models
•Black, flexible,
WINDSCREENS
WSGCU250 - Windscreen for GCU250
• Foam windscreen for use with GCU250 microphone
MC27
WSGCU250
MAC
XLR25
SF4
MOUNTS
MFM - Flange Mount
•
•
MSM -
•For GCU250 and GDU150
•Provides superior mechanical noise and vibration isolation
•Lightweight ABS material housing
•XLR (female) connector
•Thick
•Ideal fixture for boardrooms, conference rooms, pulpits, podiums, and newsrooms
•
STANDS
DS3 - Desk Stand
•3"
•6" diameter cast iron base, 3 lb.
SF4 Floor Stand
•34" to 62" adjustable height
•Round 10" diameter die cast base, 9 lb.
•
SB6 - Floor Boom Stand
•Telescopic floor stand
•Sliding 30" boom arm
•34" to 62" adjustable height, 6 lb.
•
•Tripod base
MSM
SB6
MFM
DS3
7

Architect and Engineer Specifications
HDU250 - The microphone shall be a Bogen Model HDU250. It shall be a cardioid, dynamic handheld microphone with a frequency response of 50 Hz to 18 kHz and a
HDU150 - The microphone shall be a Bogen Model HDU150. It shall be a cardioid, dynamic handheld microphone with a frequency response of 70 Hz to 15 kHz and a
HDO100 - The microphone shall be a Bogen Model HDO100. It shall be an
MBS1000A - The microphone shall be a Bogen Model MBS1000A. It shall be a
DDU250 - The microphone shall be a Bogen Model DDU250. It shall be a cardioid, dynamic desktop microphone with a frequency response of 100 Hz to 12 kHz and a
GCU250 - The microphone shall be a Bogen Model GCU250. It shall be a cardioid, back electret condenser gooseneck microphone with a frequency response of 50 Hz to 18 kHz and a
GDU150 - The microphone shall be a Bogen Model GDU150. It shall be a cardioid, dynamic gooseneck microphone with a frequency response of 100 Hz to 12 kHz and a
MGN19 - The microphone shall be a Bogen Model MGN19 dynam-
SCU250 - The microphone shall be a Bogen Model SCU250. It shall be a cardioid, back electret condenser boundary microphone with a frequency response of 20 Hz to 18 kHz and a
WCU250 - The microphone shall be a Bogen Model WCU250 hanging microphone. It shall be a cardioid, back electret condenser microphone with a frequency response of 50 Hz to 18 kHz and a
50 Spring Street, Ramsey, NJ 07446 U.S.A.