Bogen HCU350 User Manual

Size:
62.7 Kb
Download

POLAR GRAPH

 

330˚

30˚

Model HCU350

Professional Instrument

Microphone

DESCRIPTION

The HCU350 is a specially-designed,high-outputcondenser microphone that delivers high performance, reliability, and accurate pickup for both vocal and instrument sound. It is an excellent choice for professional recordings, live performances, and other critical sound reinforcement applications.

The HCU350 is a uni-directionalmicrophone offering a minimum sensitivity at an angle of 180 degrees while reducing pickup of sounds from the rear. Its polar pattern focuses on the desired sound source while suppressing unwanted ambient noise and feedback, and ensures a clean separation between individual instruments. It incorporates a transformerless electronic circuit that delivershigh-out-put, lowself-noise,and high sound pressure handling.This circuit reduces distortion at high acoustic pressures and minimizes interference that may affect the balanced audio signal.

Light but ruggedly constructed, the HCU350 is built to withstand the rigors of heavy field and studio usage. It comes in a rubberized black finish that defers reflection and halation from stage lights. It also features an excellent shock-mountsystem for effective isolation from the handling noise and vibration typically found in live performances. Its XLR connector can be easily mated to standard microphone cables. The HCU350 requires an external 9 - 52V DC phantom power source.

300˚

60˚

270˚

90˚

240˚

120˚

210˚

150˚

 

180˚

FREQUENCY RESPONSE GRAPH

dB Frequency Response, Magn dB re 1 V/microbar -60-70

-80

-90

-100

-110

SPECIFICATIONS

MIC Type:

Handheld

Element:

Back Electret Condenser

Polar Pattern:

Uni-directional

Impedance:

60-ohm

Frequency Response:

30 Hz to 20 kHz

Sensitivity*:

-56dB +/- 3 dB

Max SPL @ 1% THD:

>130 dB

S/N Ratio:

Over 65 dB

Cable:

XLR Male

 

pin 1 = shield (gnd), pin 2 = signal (+), pin 3 = signal (-)

Dimensions:

61/4" H x 1" Dia.

Product Weight:

5 oz.

Material:

Copper

Finish:

Rubberized black finish

20

200

1K

2K

20K Hz

=0o on axis

=180o off axis

* (0 dB=1V/microbar 1,000 Hz indicated by open circuit)

LIMITED WARRANTY

Bogen microphones are warranted to be free from defects in material or workmanship provided that the product has not been subjected to abuse or accident or altered in any way for one (1) year from the date of sale to the original purchaser.Any part of the product covered by this warranty that, with normal installation and use, becomes defective will be repaired or replaced by Bogen, at our option, provided the product is shipped insured and prepaid to: Bogen Factory Service Department, 50 Spring Street, Ramsey, NJ 07446, USA.The product will be returned to you freight prepaid.This warranty does not extend to any of our products that have been subjected to misuse, improper storage, neglect, accident, improper installation or have been modified or repaired in any manner that Bogen believes may affect the reliability of the product, or where the serial number or date code has been removed or defaced.

THE FOREGOING LIMITED WARRANTY IS BOGEN'S SOLE AND EXCLUSIVE WARRANTY AND THE PURCHASER'S SOLE AND EXCLUSIVE REMEDY. BOGEN MAKES NO OTHER WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED AND EXCLUDED. Bogen's liability arising out of the manufacture, sale or supplying of products or their use or disposition, whether based upon warranty, contract, tort or otherwise, shall be limited to the price of the product. In no event shall Bogen be liable for special, incidental or consequential damages (including, but not limited to, loss of profits, loss of data or loss of use damages) arising out of the manufacture, sale or supplying of products, even if Bogen has been advised of the possibility of such damages or losses.

Products that are out of warranty will also be repaired by the Bogen Factory Service Department --same address as above or call201-934-8500.The parts and labor involved in these repairs are warranted for 90 days when repaired by the Bogen Factory Service Department. All shipping charges in addition to parts and labor charges will be at the owner's expense.

Printed in the Philippines. 0308

 

 

 

 

50 Spring Street, Ramsey, NJ 07446, U.S.A.

© 2003 Bogen Communications, Inc.

54-2047-01B

201-934-8500;Fax:201-934-9832

Specifications subject to change without notice.

Web Site: www.bogen.com