Blodgett IN-VENT VIB3870-2 User Manual

Size:
758.1 Kb
Download

VIB3870-1,VIB3870-2,

VIB3870-3

Single, Double, Triple

In-Vent® Hood System

OPTIONS AND ACCESSORIES

(AT ADDITIONAL CHARGE)Installation

Project

Item No.

Quantity

In-Vent® conveyor oven ventilation hood system.

All data is shown per oven section, unless otherwise indicated.

EXTERIOR CONSTRUCTION

Stainless steel exterior on front, sides, and ducts

Integral exhaust and make-upair plenum and duct collar assembly

Quick release duct fittings and duct extensions

Front air make-upcooling panels

Cooling fan motor exhaust plenum

Conveyor entrance/exit end exhaust plenums

Heat shields over end exhaust plenums and vertical exhaust corner riser

Stainless steel ceiling trim pieces included

INTERIOR CONSTRUCTION

Aluminized steel, 300 and/or 400 series stainless steel

Insulated supply ducting

OPERATION

Captures smoke, contaminants and cooking by-productsemanating from the oven.

Minimizes amount of tempered air removed from kitchen by surrounding itself and oven with a layer of untempered make-upair.

Requires much less exhaust and make-upair flow than conventional overhead hoods.

Exhausts grease and smoke from directly over conveyors resulting in cleaner oven and environment.

Cooler surfaces lower radiant heat to room and increase operator safety and comfort significantly

STANDARD FEATURES

Available in three configurations

VIB3870-1for single MT3870 oven

VIB3870-2for double stacked MT3870 ovens

VIB3870-3for triple stacked MT3870 ovens

Fully detachable panels without tools

Quick disconnect ducting for servicing or cleaning

Adds only 4" to front-to-backdimensions

Ventilation system controls can be interlocked with the oven’s controls

Modular design for easier handling and cleaning

MT3870 Oven Conveyor Blodgett for 3-VIB38702,-VIB38701,-VIB3870ModelVent®-In

BLODGETT OVEN COMPANY www.blodgett.com

1400 Toastmaster Drive, Elgin, IL USA 60120 • Phone: (847) 741-3300• Fax: (847)741-0015

VIB3870-1,VIB3870-2,VIB3870-3

APPROVAL/STAMP

SHORT FORM SPECIFICATIONS

Universal specification, based on specification sheet for specific system with specific oven model.

SYSTEM

OVEN MODEL

VIB3870-1,VIB3870-2,VIB3870-3

MT3870

Provide Blodgett In-Vent®ventilation system, engineered for Blodgett model MT3870 conveyor oven. Exterior shall be stainless steel on front sides and ducts. Interior shall be of aluminized steel. Baffle grease filters shall be of galvanized steel or aluminum construction. All exterior panels removable without the use of tools for access to mechanicals and cleaning. Integral exhaust andmake-upair plenums connected to stainless steel duct collars with quick disconnect assemblies. Ventilation system shall comply withANSI/NSF-2andUL-710.Provide factory authorized assembly and installation at additional cost, perANSI/NFPA-96.Ductwork between extension duct collars and rooftop equipment, and rooftop equipment not included.

DIMENSIONS:

Floor space 105.8" (2685mm) W x 68" (1727mm) D

AIRFLOW REQUIREMENTS:

Model

Supply

Exhaust

Duct Size (all models):12" x 12" (305mm x 305mm)

12" x 12" (305mm x 305mm)

VIB3870-1:

 

 

CFM:

1100 CFM

1500 CFM

Static Pressure:

0.02-0.03"W.C.(5-7Pa)

1.5" W.C. (373 Pa)

VIB3870-2:

 

 

CFM:

1450 CFM

1850 CFM

Static Pressure:

0.09" W.C. (22 Pa)

1.4" W.C. (348 Pa)

VIB3870-3:

 

 

CFM:

1800 CFM

2200 CFM

Static Pressure:

0.12" W.C. (30 Pa)

1.8" W.C. (448 Pa)

MINIMUM ENTRY CLEARANCE:

Largest uncrated component

70" x 46.3" x 20" (1778mm x 1176mm x 508mm)

SHIPPING INFORMATION:

Weight:

 

VIB3870-1

380 lbs. (172 kg)

VIB3870-2

480 lbs. (218 kg)

VIB3870-3

580 lbs. (263kg)

Crate size:

 

VIB3870-1

Palletized size and number not yet finalized

VIB3870-2

Palletized size and number not yet finalized

VIB3870-3

Palletized size and number not yet finalized

NOTE: The company reserves the right to make substitutions of components without prior notice

BLODGETT OVEN COMPANY www.blodgett.com

1400 Toastmaster Drive, Elgin, IL USA 60120 • Phone: (847) 741-3300• Fax: (847)741-0015

Printed in U.S.A.

NOTE: FOR COMMERCIAL USE ONLY

P/N M10591 Rev A (7/01)