Radio / CD
Modena
RD 148
Operating instructions
17 |
16 |
15 |
14 |
13
12
1
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
13
2
6 3 
2
Contents |
|
Quick reference ............................ |
31 |
Important notes ............................ |
36 |
What you need to know ........................ |
36 |
Traffic safety ......................................... |
36 |
Installation ............................................. |
36 |
Telephone mute .................................... |
36 |
Accessories .......................................... |
36 |
KeyCard theft protection |
|
system ........................................... |
37 |
Operating the unit ................................. |
37 |
Removing the KeyCard ........................ |
37 |
“Training” a second KeyCard/ |
|
Replacing a KeyCard ............................ |
37 |
Displaying the radio pass data ............. |
38 |
Short Additional Memory (S.A.M.) ........ |
38 |
Turn On Message (T.O.M.) .................. |
38 |
Optical indication for extra theft |
|
protection .............................................. |
38 |
Care of your KeyCard ........................... |
38 |
Selecting the operating mode ..... |
39 |
Radio operation with RDS ........... |
39 |
AF - Alternative frequency .................... |
39 |
REG - regional programme .................. |
39 |
Selecting a waveband .......................... |
40 |
Station tuning ........................................ |
40 |
Automatic tuning / ....................... |
40 |
Manual tuning with << >> .................. |
40 |
Scrolling through the broadcasting |
|
networks (FM only) ............................... |
40 |
Switching between the memory banks |
|
(FM) ...................................................... |
41 |
Storing stations ..................................... |
41 |
Automatically storing the strongest |
|
stations with Travelstore ....................... |
41 |
Recalling stored stations ...................... |
41 |
Scanning stored stations with |
|
Preset Scan .......................................... |
41 |
Scanning stations with Radio Scan ...... |
42 |
Changing the scan time ........................ |
42 |
Selecting the seek tuning sensitivity .... |
42 |
Switching from stereo to mono (FM) .... |
42 |
Adjusting the bandwidth (FM) ............... |
42 |
PTY - Programme Type ........................ |
42 |
Switching PTY on/off ......................... |
43 |
Programme type ................................... |
43 |
Checking the programme type of |
|
the station .......................................... |
43 |
Displaying the selected programme |
|
type .................................................... |
43 |
Selecting a programme type ............. |
43 |
Storing programme types .................. |
44 |
Scanning stations with PTY SCAN ... |
44 |
PTY priority ........................................ |
44 |
Traffic programme station |
|
reception with RDS-EON ............. |
45 |
Traffic announcement priority on/off .... |
45 |
Warning beep ....................................... |
45 |
Switching the warning beep off ......... |
46 |
Automatic seek tuning start |
|
(CD operation) ...................................... |
46 |
Adjusting the volume for traffic announcements and the warning beep 46
CD operation ................................. |
47 |
Switching to CD operation .................... |
47 |
Inserting a CD ....................................... |
47 |
Removing a CD .................................... |
47 |
Selecting a track ................................... |
47 |
Repeat track ......................................... |
47 |
MIX playback ........................................ |
47 |
SCAN .................................................... |
48 |
Selecting the display mode .................. |
48 |
Entering CD names .............................. |
48 |
Deleting CD names with DSC UPDATE . 48 |
|
Clock ............................................. |
49 |
Setting the clock ................................... |
49 |
Displaying the clock .............................. |
49 |
Correcting the clock after the power |
|
has been disconnected ......................... |
50 |
Deactivating the hour correction |
|
function ................................................. |
50 |
Warning note ................................... |
50 |
Setting the equaliser .................... |
51 |
Notes on making the settings ............... |
51 |
Setting recommendations on the |
|
Internet .................................................. |
51 |
Assistance in setting your equaliser ..... |
52 |
DSC programming ....................... |
53 |
Overview of the DSC factory settings .. |
55 |
Specifications ............................... |
56 |
Blaupunkt telephone hotline ................. |
56 |
30
Quick reference
1Switching on/off with the buttons:
Press one of the buttons illustrated here after you have inserted the KeyCard.
The unit will play at the pre-adjusted volume.
Switching on/off with the KeyCard:
The set is switched on or off by inserting or removing the KeyCard.
Note:
Be sure to read the information in the section on “KeyCard theft protection system”.
Switching on/off via the ignition:
If the equipment has been connected correspondingly, the set can also be turned on and off with the vehicle ignition.
After the ignition has been switched off, a double beep tone will remind you that you should remove the KeyCard before leaving your vehicle.
Switching on when the ignition is switched off:
To keep on operating the set when the ignition is switched off (KeyCard is inserted), proceed as follows:
Press ON after you hear the double beep tone.
The unit will turn on.
To prevent the battery from going dead, the system will turn off automatically after it has played for one hour.
2VOL+ / VOL-
Alters the volume.
Each time the set is switched on, it will play at the pre-adjusted volume (VOL FIX).
You can also change the VOL FIX setting (see the section on “DSC programming”).
3
Instantly mutes the volume.
Press the 
button to mute the volume immediately. “MUTE” will appear in the display.
Cancel the function by pressing button 
or VOL+.
If you press VOL-, the normal volume will be the same as the mute volume.
To programme the mute volume level, proceed as follows:
•Set the desired volume.
•Press 
for 2 seconds until you hear a beep.
Now this volume level is stored as your mute volume.
Extra 
function
Press to store settings made in the DSC menu.
4SC - Scan
Radio operation
Scan
Press SC briefly -
“FM SCAN” will alternate with the abbreviated name of the scanned station in the display. The unit will scan all of the FM stations in the current reception range.
Preset Scan
Preset Scan cannot be started unless PTY has been switched off (“PTY” does not light up in the display). Press SC for approximately 2 seconds until you hear a beep.
PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH
31
“SCAN” will alternate with the abbreviated name of the scanned station in the display.
The unit will scan all of the stations stored on the preset buttons in the current reception range.
To stop Scan / Preset Scan:
Press SC or the search rocker switch once again.
PTY Scan
PTY Scan cannot be started unless PTY is switched on (“PTY” lights up in the display).
All of the stations for the programme type selected will be scanned briefly.
CD operation
CD Scan
Press SC briefly -
“CD-SCAN” will appear in the display. The unit will scan all CD titles.
To stop CD Scan:
Press SC once again.
5LD - Loudness
When the car stereo is playing quietly, the Loudness function creates a more natural sound by boosting the low frequency range.
To switch Loudness on/off:
Press LD briefly.
Additional function: CLOCK
If you select the clock function the current time will appear permanently in the display.
To switch the display mode: Press LD for approximately 2 seconds.
The time will disappear from the display for approximately 8 seconds when you select a different function.
6Rocker switch
Radio operation
/ |
Station search |
|
Up |
|
Down |
<</>> |
Up/Down in short intervals (for FM |
|
only when AF is off) |
For FM only:
<</>> To scroll through the station networks when AF is on,
NDR 1, 2, 3, 4, N-JOY, FFN,
ANTENNE ... .
CD operation
/ 
Track selection 
Up
Down
Press 
once to go back to the beginning
of the current track.
Fast advance, audible (CUE). Hold down >> as long as required.
Fast reverse, audible (REVIEW).
Hold down << as long as required.
Extra rocker switch functions:
Further setting functions with
AUD |
A |
DSC MODE @ |
|
PTY |
? |
Requirement: The corresponding function must be activated.
32
7Display
a
e f g h i j k l m n
b 
o
c
d
a) NDR2 - Station name
b)VIVALDI - CD name or
c)1 : 52 - CD time (playback time)
|
|
|
and number (CD number) |
d) |
16:31 |
- |
Time |
e) |
FM |
- |
Waveband |
f)6 - Preset button (1-6)
g)I, II, T - Memory bank I, II or
|
Travelstore |
h) lo |
- Seek tuning sensitivity |
i) |
AF |
- |
Alternative frequency for |
|
|
|
RDS operation |
j) |
T |
- Traffic programme (a traffic |
|
|
|
|
information station is play- |
|
|
|
ing) |
k) |
A |
- Priority for traffic informa- |
|
|
|
|
tion stations |
l) |
LD |
- |
Loudness is activated |
m) PTY |
- Programme type function is |
||
|
|
|
activated |
n) |
CD |
- A CD is inserted in the unit |
|
o) |
T5 |
- Track no. 5 is playing |
|
8KeyCard theft protection system
To operate the set the KeyCard must be inserted first.
KeyCard
Insert KeyCard
When the KeyCard tongue is protruding out of the unit, insert the KeyCard with the contact area facing up into the slot in the middle of the area.
If necessary, pull the KeyCard forward. Be sure to read the information in the section on “KeyCard theft protection system”.
Flashing KeyCard tongue
When the radio is turned off and the KeyCard removed, the KeyCard tongue can be programmed to flash for optical theft protection.
For more information see the section on “DSC programming”.
9BND
Switches between the memory levels/ wavebands FMI, FMII, TS (Travelstore), M and L.
Additional Travelstore function Storing the six stations with the strongest reception using Travelstore: Press BND until you hear a beep or “T--STORE” appears in the display.
:AF
Alternative Frequency during RDS operation:
When “AF” lights up in the display, the system will automatically search for a frequency offering better reception for the same RDS programme.
AF on/off: Press AF briefly.
PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH
33
Regional function on/off:
Press the AF button for approximately 2 seconds until you hear a beep. “REG ON” or “REG OFF” will appear in the display (see the section on REG - regional programme).
;TA (Traffic Announcement)
When “T” lights up in the display, the radio is currently playing a traffic information station.
When “A” appears in the display, the priority for traffic stations has been activated.
You can only tune into those stations which broadcast traffic announcements.
Priority on/off: Press TA.
<1, 2, 3, 4, 5, 6 - preset buttons
Radio operation
On FM, you can store six stations for each of the memory banks I, II and “T”. On MW/LW, you can store six stations each for each waveband.
To store a station - Press a preset button during radio operation and hold it down until the set resumes play after the muting and you hear a beep.
To recall a station - Select the desired waveband. On FM, adjust the corresponding memory bank and press the relevant preset button briefly.
Extra function for preset buttons
To store and recall a PTY programme type.
On FM, you can store and recall one programme type on/from each preset button when PTY is active (“PTY” lights up in the display).
CD operation
1/II - Pause
Switching Pause on/off: Press 1/II. “CD PAUSE” will appear briefly in the display.
2/RPT - Repeat
Repeat track: Press 2/RPT, “REPEAT” will appear briefly in the display and the track will repeat until 2/RPT is pressed again. “RPT OFF” will then appear in the display.
3/MIX -
MIX plays the CD tracks in random order.
Switching MIX on/off: Press 3/MIX briefly.
The mode activated will appear briefly in the display: “MIX CD” or “MIX OFF”.
=
• SRC
SRC (Source)
When a CD is inserted you can switch between the different audio sources radio and CD.
(Eject)
Hold down the button for approximately 2 seconds and the CD will eject.
>CD slot
When you insert a disc into the slot with the label side facing up, it will be pulled in automatically and transported to the playback position. CD playback switches on automatically.
?PTY (Programme Type)
In the PTY mode, the preset buttons become programme type buttons. With each preset you can select one programme type such as NEWS, SPORT, POP MUSIC, EDUCATE, etc. With the << >> rocker switch, it is possible to recall all of the PTY programme types as long as the PTY function has been activated (“PTY” will light up in the display).
34
@DSC (Direct Software Control) Use the DSC function to customise
certain programmable, basic settings to suit your personal needs and preferences. See the section on “DSC programming” for more information.
AAUD
Adjusts the treble and bass frequencies.
Different settings can be stored for FM, AM and CD.
To store the settings: Select the operating mode.
Press AUD once and use the rocker switch to adjust the settings.
Treble +
Treble –
Bass –
Bass +
Select the next operating mode and adjust the settings as desired.
Setting the Balance (left/right) and the fader (front/rear).
Press AUD twice.
Fader front
Fader rear
Balance left
Balance right
The settings selected will appear in the display. The last setting will be stored automatically.
Switching AUD off:
Press the button once again briefly. If no changes are made within 8 sec-
onds, the AUD mode will switch off automatically.
Extra EQU ON/OFF function
Switching the equaliser on/off: Press AUD for approximately 2 sec-
onds. “EQU ON” or “EQU OFF” will appear briefly in the display.
PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH
35
Important notes
What you need to know
Before using your new car radio, please read through the following information carefully.
Traffic safety
As the driver of a motor vehicle, it is your responsibility to pay attention to the traffic situation at all times. Never use your car radio in a way that could distract you.
Please keep in mind that you travel a distance of 14 m per second at a speed of only 50 km/h.
Should the traffic situation become particularly demanding, we advise you not to use the radio.
Always make sure that you are still able to hear any warning signals coming from outside the vehicle, such as police or fire engine sirens, so that you can react accordingly.
Consequently, you should always select a moderate volume for playing your car radio while you are driving.
Installation |
Accessories |
If you would like to install your new car stereo yourself or add other audio components to existing ones, then please read the enclosed instructions on installation and connection carefully.
In order to ensure that the set operates properly the positive power supply line must be connected via the ignition and the permanent +12 V lead.
Do not ground the loudspeaker outputs!
Telephone mute
If you have installed a mobile telephone in your vehicle, radio or CD playback can be muted automatically when you use the phone (telephone mute).
“PHONE” will then appear in the display.
If TA is active, traffic messages will always have priority. To end the announcement before it has finished press the TA button.
Use Blaupunkt-approved accessories and spare parts only.
You can use the following Blaupunkt products with this car stereo:
Amplifier
All Blaupunkt amplifiers
Remote control
With the infrared remote control RC 06 you can control all of the important functions of your car hi-fi system from the steering wheel.
36
Loading...