Radio / Cassette
Freiburg RCR 127
Montreux RCR 127
Colorado RCR 127
Operating instructions
18 |
17 |
16 |
15 |
14 |
13 |
12 |
11 |
Freiburg RCR 127
Colorado RCR 127
10
1
Montreux RCR 127
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
2
Contents |
|
Quick reference ............................ |
24 |
Important notes ............................ |
28 |
Precautions ........................................... |
28 |
Traffic safety ......................................... |
28 |
Installation ............................................. |
28 |
Accessories .......................................... |
28 |
KeyCard theft protection system 29 |
|
Putting the unit into operation .............. |
29 |
Removing the KeyCard ........................ |
29 |
“Training” a second KeyCard/ |
|
Replacing a KeyCard ............................ |
29 |
Displaying the radio pass data ............. |
29 |
Short Additional Memory (S.A.M.) ........ |
30 |
Turn On Message (T.O.M.) .................. |
30 |
Optical indication of anti-theft |
|
protection .............................................. |
30 |
Care of your KeyCard ........................... |
30 |
Switching the audio source ........ |
31 |
Radio operation with RDS ........... |
31 |
AF - Alternative frequency .................... |
31 |
REG - regional programme .................. |
31 |
Selecting a waveband |
|
(only Montreux RCR 127) ..................... |
32 |
Station tuning ........................................ |
32 |
Automatic tuning / ....................... |
32 |
Manual tuning with << >> .................. |
32 |
Scrolling through the broadcasting |
|
networks ................................................ |
32 |
Changing the memory bank ................. |
33 |
Storing stations ..................................... |
33 |
Automatically storing the strongest |
|
stations with Travelstore ....................... |
33 |
Recalling stored stations ...................... |
33 |
Scanning stored stations with |
|
Preset Scan .......................................... |
33 |
Scanning stations with Radio-Scan ...... |
34 |
Selecting the seek tuning sensitivity .... |
34 |
Switching from stereo to mono ............. |
34 |
Loudness .............................................. |
34 |
PTY – Programme-Type....................... |
34 |
Switching PTY on/off ......................... |
34 |
Programme type ................................ |
34 |
Checking the programme type of the |
|
station ................................................ |
35 |
Displaying the selected programme |
|
type .................................................... |
35 |
Selecting a programme type ............. |
35 |
Storing programme types .................. |
36 |
Scanning stations with PTY-SCAN ... |
36 |
PTY priority ........................................ |
36 |
Receiving traffic programme |
|
stations with RDS-EON................ |
37 |
Traffic announcement priority on/off .... |
37 |
Beep tone ............................................. |
37 |
Switching off the beep tone ............... |
37 |
Automatic seek tuning start |
|
(tape operation) .................................... |
37 |
Adjusting the volume for traffic |
|
announcements and the beep tone ...... |
38 |
Tape operation ............................. |
38 |
Inserting a tape ..................................... |
38 |
Removing a tape................................... |
38 |
Fast Forward/Rewind ........................... |
38 |
Selecting titles with CPS ...................... |
38 |
Switching the tape side (autoreverse) .. |
39 |
Tape equalisation ................................. |
39 |
Scanning cassette titles with SCAN ..... |
39 |
Listening to the radio during fast tape |
|
winding with RM (Radio Monitor) ......... |
39 |
Care notes ............................................ |
39 |
DSC programming ....................... |
40 |
Overview of DSC factory settings ........ |
41 |
Appendix ....................................... |
42 |
Specifications ........................................ |
42 |
Blaupunkt telephone hotline ................. |
42 |
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS
23
Quick reference
1Switching on/off with the ON button:
Press ON.
When switching the set on with the ON button, the KeyCard has to be inserted. The unit will play with the pre-ad- justed volume.
Switching on/off with the KeyCard:
The set has to be turned on with the ON button.
Note:
Read the information in chapter “KeyCard theft protection system”.
Switching on/off via the ignition:
When connected correspondingly, the set can also be turned on and off with the vehicle ignition.
After the ignition has been switched off, a double beep tone will remind you that you should remove the KeyCard before leaving your vehicle.
Switching on with the ignition being switched off:
To keep on operating the set when the ignition is switched off (KeyCard is inserted), proceed as follows:
Press ON. The unit will be turned on. To avoid that the battery goes flat, the system will be turned off automatically after one hour of playback.
•Press for 1 second until you
hear a beep.
Now this volume level is stored as your mute volume.
4Rocker switch
Radio operation
2VOL+ / VOL-
To alter the volume.
Each time the set is switched on, it will play with the pre-adjusted volume (VOL FIX).
You may also change the VOL FIX setting (see chapter “DSC programming”).
3
For instantly muting the volume.
By pressing the button the volume can be muted immediately. “MUTE” will appear in the display.
The function is cancelled by pressing
button or VOL+.
When pressing VOL-, the (mute) volume will be adopted.
To programme the mute volume level, proceed as follows:
• Adjust the desired volume.
/ Station search
Up
Down
<</>> Up/Down in short intervals
(on FM only if AF is off)
On FM only:
<</>> To scroll through the station networks when AF is on, e.g.NDR 1, 2,
3, 4, N-JOY, FFN, ANTENNE ...
24
Tape operation |
5 Display |
/ Title selection (S-CPS)
Up
Down
Fast forward
Fast rewind
Stop function by pressing the opposite key.
Extra rocker switch functions:
Further setting functions with
AUD |
B |
DSC Mode |
A |
PTY |
@ |
Condition: The corresponding function is activated.
a
c d e f g h i j k
b
a)NDR1 NDS - Station name
b)TR 1 - Track (side) 1 of the cas-
|
|
sette |
c) FM |
- Waveband |
|
d) |
5 |
- Preset button (1-6) |
e) |
I, II, T |
- Memory bank I, II or |
|
|
Travelstore |
f) |
lo |
- Seek tuning sensitivity |
g) |
AF |
- Alternative frequency for |
|
|
RDS operation |
h) |
TP |
- A traffic station is being |
|
|
received |
i) |
TA |
- Priority for traffic stations |
j) |
LD |
- Loudness |
k) |
PTY |
- Programme type function |
6KeyCard theft protection system
To operate the set it is necessary that the KeyCard is inserted.
KeyCard
Inserting the KeyCard
With the KeyCard tongue sticking out of the unit, introduce the KeyCard into the slot with the contact area showing up.
To remove the card, press first to unlock.
Read also the information in chapter “KeyCard theft protection system”.
Flashing KeyCard tongue
When the radio is turned off and the KeyCard removed, the KeyCard tongue can be programmed to flash for optical theft protection.
For more information see chapter “DSC programming”.
This flashlight can be switched off by pushing in the tongue and lock. “WRONG KC” will briefly appear on the display and the set will switch off automatically.
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS
25
7FMT (Freiburg RCR 127, Colorado RCR 127)
BND (Montreux RCR 127)
For selection of the FM memory banks I, II and T (Travelstore).
To switch over:
Press button repeatedly.
The selected memory bank will appear in the display.
Travelstore
To store and recall the six most powerful stations with Travelstore.
To store: Press button for approximately 1 sec. until you hear a beep
and “T-STORE” appears in the display. To recall: Select the memory bank “T” and press the corresponding preset button (1-6) briefly.
Montreux RCR 127:
Additional selection of mediumand long-wave stations, provided that “AM ON” has been adjusted in the DSC menu.
8AF
Alternative frequency during RDS operation:
When “AF” lights up in the display, the system will automatically seek a frequency offering better reception of the same RDS programme.
AF on/off: Press AF briefly.
Regional function on/off:
Press the AF button for approximately 1 sec. until you hear a beep. “REGON” or “REG-OFF” will appear in the display (see chapter REG - regional programme).
9TA (priority for traffic announcements) When “TA” lights up in the display, the system will play traffic stations only. Priority on/off: Press TA.
:1, 2, 3, 4, 5, 6 - preset buttons
You can store six stations for each of the memory banks I, II and T.
To store a station: Press a preset button during radio operation and hold down until the set resumes play after the muting and you hear a beep.
To recall a station: Select the desired memory bank and press the relevant preset button briefly.
Extra function of preset buttons
To store and recall a PTY programme type.
When PTY is active (“PTY” lights up in the display), you can store and recall one programme type on/from each preset button on FM.
;SRC (Source)
You can switch between the radio and tape audio sources (if a tape is inserted).
<lo
To switch the seek tuning sensitivity level:
Press button briefly.
If “lo” is displayed, the radio will only pick up strong, local stations (normal sensitivity).
If “lo” does not light up, the radio will also pick up weaker, distant stations (high sensitivity).
Extra function of lo button:
To switch between mono and stereo reception:
Press button for approximately 1 sec. (beep).
The selected condition will be briefly displayed.
26
= /
To switch the tape side: Press briefly. To eject the tape: Press for approximately 1 sec.
Extra function /
Frequency display during radio operation:
Press button briefly.
The frequency will be briefly displayed.
>Cassette loading slot
Insert the tape with side A or 1 facing up, the open side showing to the right.
?SC
Radio operation
Scan
Press SC briefly.
The scanned frequency or the station name will start flashing in the display. During the actual scanning process “FM-SCAN” or “AM-SCAN” will be displayed. The unit will scan all FM stations which can be received.
Preset Scan
Press SC for approximately 1 sec. until you hear a beep.
“SCAN” and the name or frequency of the scanned station will alternately appear in the display.
The unit will scan all stations stored on the preset buttons.
To stop Scan / Preset Scan:
Press SC once again.
Tape operation
Cassetten-Scan
Press SC.
“CC-SCAN” will appear in the display. All cassette titles will be scanned briefly.
To stop cassette scan: Press SC once again.
@PTY (Programme Type)
In the PTY mode, the preset buttons become programme type buttons. With every preset you can select one programme type, such as for example NEWS, SPORT, POP MUSIC, EDUCATE, etc.
ADSC (Direct Software Control) Use the DSC function to customise
certain programmable, basic settings to suit your personal needs and preferences. See chapter “DSC programming” for more information.
BAUD
To adjust the treble, bass, balance and fader.
If the display shows “TRE” or “BAS”, you can adjust the reproduction of the treble and bass frequencies with the rocker switch. If “BAL” or “FAD” is displayed, you can set the balance (left/ right) and fader (front/rear).
Press AUD as many times as required and make the setting using the rocker switch.
Treble + / Fader front
Treble – / Fader rear
Bass – / Balance left
Bass + / Balance right
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS
27