Blaupunkt BREMEN RCM 127 User Manual

Size:
169.23 Kb
Download

Radio / Cassette / Changer

Coburg RCM 127

Casablanca RCM 127

Cannes RCM 127

Woodstock DJ I

Woodstock DJ A

Operating instructions

18

17

16

15

14

13

12

11

1

2

3

4

2

3

Coburg

RCM 127

Woodstock

DJ I

10

Casablanca

RCM 127

Cannes

RCM 127

Woodstock

DJ A

5

6

7

8

9

11Fernbedienung RC 06 (Option) Remote control RC 06 (optional) Télécommande RC 06 (en option) Telecomando RC 06 (optional) Afstandsbediening RC 06 (Optie) Fjärrkontroll RC 06 (Tillval)

4

Mando a distancia RC 06 (opcional)

Telecomando RC 06 (opção)

2

Contents

 

Quick reference ............................

28

Important notes ............................

33

Precautions ...........................................

33

Traffic safety .........................................

33

Installation .............................................

33

Sound source mute ..............................

33

Accessories ..........................................

33

KeyCard theft protection system 34

Putting the unit into operation ..............

34

Removing the KeyCard ........................

34

“Training” a second KeyCard/

 

Replacing a KeyCard ............................

34

Displaying the radio pass data .............

34

Short Additional Memory (S.A.M.) ........

35

Turn On Message (T.O.M.) ..................

35

Optical indication of anti-theft

 

protection ..............................................

35

Care of your KeyCard ...........................

35

Switching the audio source ........

35

Radio operation with RDS ...........

36

AF - Alternative frequency ....................

36

REG - regional programme ..................

36

Selecting a waveband

 

(only Casablanca RCM 127,

 

Cannes RCM 127, Woodstock DJ A) ...

36

Station tuning ........................................

37

Automatic tuning / .......................

37

Manual tuning with << >> ..................

37

Scrolling through the broadcasting

 

networks................................................

37

Changing the memory bank .................

37

Storing stations .....................................

37

Automatically storing the strongest

 

stations with Travelstore .......................

38

Recalling stored stations ......................

38

Scanning stored stations with

 

Preset Scan ..........................................

38

Scanning stations with Radio-Scan ......

38

Selecting the seek tuning sensitivity ....

39

Switching from stereo to mono .............

39

Loudness ..............................................

39

PTY – Programme-Type.......................

39

Switching PTY on/off .........................

39

Programme type ...................................

39

Checking the programme type of the

 

station ................................................

40

Displaying the selected programme

 

type ....................................................

40

Selecting a programme type .............

40

Storing programme types ..................

41

Scanning stations with PTY-SCAN ...

41

PTY priority ........................................

41

Receiving traffic programme

 

stations with RDS-EON................

42

Traffic announcement priority on/off ....

42

Beep tone .............................................

42

Switching off the beep tone ...............

42

Automatic seek tuning start ..................

42

Adjusting the volume for traffic

 

announcements and the beep tone ......

43

Tape operation .............................

43

Inserting a tape .....................................

43

Removing a tape...................................

43

Fast Forward/Rewind ...........................

43

Selecting titles with CPS ......................

43

Switching the tape side (autoreverse) ..

44

Tape equalisation .................................

44

Scanning cassette titles with SCAN .....

44

Listening to the radio during

 

fast tape winding with RM ....................

44

Care notes ............................................

44

CD changer operation ..................

45

Switching to the CD changer mode ......

45

Selecting CDs and titles .......................

45

MIX playback ........................................

45

Selecting the display mode ..................

46

SCAN ....................................................

46

DSC programming .......................

47

Overview of DSC factory settings ........

49

Appendix .......................................

49

Specifications ........................................

49

Blaupunkt telephone hotline .................

49

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS

27

Quick reference

1Switching on/off with the ON button:

Press ON.

When switching the set on with the ON button, the KeyCard has to be inserted. The unit will play with thepre-ad-justed volume.

Switching on/off with the KeyCard:

The set has to be turned on with the ON button.

Note:

Read the information in chapter “KeyCard theft protection system”.

Switching on/off via the ignition:

When connected correspondingly, the set can also be turned on and off with the vehicle ignition.

After the ignition has been switched off, a double beep tone will remind you that you should remove the KeyCard before leaving your vehicle.

Switching on with the ignition being switched off:

To keep on operating the set when the ignition is switched off (KeyCard is inserted), proceed as follows:

Press ON. The unit will be turned on. To avoid that the battery goes flat, the system will be turned off automatically after one hour of playback.

2VOL+ / VOL-

To alter the volume.

Each time the set is switched on, it will play with the pre-adjustedvolume (VOL FIX).

You may also change the VOL FIX setting (see chapter “DSC programming”).

3

For instantly muting the volume.

By pressing the button the volume can be muted immediately. “MUTE” will appear in the display.

The function is cancelled by pressing

button orVOL+.

When pressing VOL-,the(mute) volume will be adopted.

To programme the mute volume level, proceed as follows:

Adjust the desired volume.

Press for 1 second until you hear a beep.

Now this volume level is stored as your mute volume.

28

4 Rocker switch

Radio operation

/ Station search

Up

Down

<</>> Up/Down in short intervals

(on FM only if AF is off)

On FM only:

<</>> To scroll through the station networks when AF is on, e.g.NDR 1, 2,

3, 4, N-JOY,FFN, ANTENNE ...

Tape operation

/ Title selection(S-CPS)

Up

Down

Fast forward

Fast rewind

Stop function by pressing the opposite key.

Changer operation Optional:

Coburg RCM 127, Casablanca RCM 127, Cannes RCM 127

Included in scope of delivery:

Woodstock DJ I, Woodstock DJ A

CD selection

Up

Down

Title selection

Upwards: Press briefly.

CUE - fast advance (audible):

Keep depressed.

Downwards: Press as many times as required.

To re-starta title:Press briefly.

REVIEW - fast reverse (audible):

Keep depressed.

Extra rocker switch functions:

Further setting functions with

AUD

B

DSC Mode

A

PTY

@

Condition: The corresponding function is activated.

5 Display

a

d e f g h i j k l

b

c

a)NDR1 NDS - Station name

b)TR 1 - Track (side) 1 of the cas-

 

 

sette

c)

1 : 52

- Playback TIME or disc

 

 

NUMBER during CD

 

 

changer operation

d) FM

- Waveband

e)

5

- Preset button (1-6)

f)

I, II, T

- Memory bank I, II or

 

 

Travelstore

g)

lo

- Seek tuning sensitivity

h)

AF

- Alternative frequency for

 

 

RDS operation

i)

TP

- A traffic station is being

 

 

received

j)

TA

- Priority for traffic stations

k)

LD

- Loudness

l)

PTY

- Programme type function

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS

29

6KeyCard theft protection system

To operate the set it is necessary that the KeyCard is inserted.

KeyCard

Inserting the KeyCard

With the KeyCard tongue sticking out of the unit, introduce the KeyCard into the slotwith the contact area showing up.

To remove the card, press first to unlock.

Read also the information in chapter “KeyCard theft protection system”.

Flashing KeyCard tongue

When the radio is turned off and the KeyCard removed, the KeyCard tongue can be programmed to flash for optical theft protection.

For more information see chapter “DSC programming”.

This flashlight can be switched off by pushing in the tongue and lock. “WRONG KC” will briefly appear on the display and the set will switch off automatically.

7FMT (Coburg RCM 127, Woodstock DJ I)

BND (Casablanca RCM 127, Cannes RCM 127, Woodstock DJ A)

For selection of the FM memory banks I, II and T (Travelstore).

To switch over:

Press button repeatedly.

The selected memory bank will appear in the display.

Travelstore

To store and recall the six most powerful stations with Travelstore.

To store: Press button for approximately 1 sec. until you hear a beep

and “T-STORE”appears in the display.To recall: Select the memory bank “T” and press the corresponding preset button(1-6)briefly.

Casablanca RCM 127,

Cannes RCM 127, Woodstock DJ A:

Additional selection of mediumand long-wavestations, provided that “AM ON” has been adjusted in the DSC menu.

8AF

Alternativefrequency during RDS operation:

When “AF” lights up in the display, the system will automatically seek a frequency offering better reception of the same RDS programme.

AF on/off: Press AF briefly.

Regional function on/off:

Press the AF button for approximately 1 sec. until you hear a beep. “REGON” or“REG-OFF”will appear in the display (see chapter REG - regional programme).

9TA (priority fortrafficannouncements) When “TA” lights up in the display, the system will play traffic stations only. Priority on/off: PressTA.

:1, 2, 3, 4, 5, 6 - preset buttons

You can store six stations for each of the memory banks I, II and T.

To store a station: Press a preset button during radio operation and hold down until the set resumes play after the muting and you hear a beep.

To recall a station: Select the desired memory bank and press the relevant preset button briefly.

30

Extra function of preset buttons

To store and recall a PTY programme type.

When PTY is active (“PTY” lights up in the display), you can store and recall one programme type on/from each preset button on FM.

;SRC (Source)

You can switch between the radio, tape and CD changer operating modes, provided that a cassette/CD is inserted.

<lo

To switch the seek tuning sensitivity level:

Press button briefly.

If “lo” is displayed, the radio will only pick up strong, local stations (normal sensitivity).

If “lo” does not light up, the radio will also pick up weaker, distant stations (high sensitivity).

Extra function of lo button:

To switch between mono and stereo reception:

Press button for approximately 1 sec. (beep).

The selected condition will be briefly displayed.

=/

To switch the tape side: Press briefly. To eject the tape: Press for approximately 1 sec.

Extra function /

Frequency display during radio operation:

Press button briefly.

The frequency will be briefly displayed.

>Cassette loading slot

Insert the tape with side A or 1 facing up, the open side showing to the right.

? SC

 

 

DEUTSCH

 

 

 

Radio operation

 

 

 

 

 

ENGLISH

Scan

 

 

 

Press SC briefly.

 

 

The scanned frequency or the station

 

 

name will start flashing in the display.

 

 

 

FRANÇAIS

played. The unit will scan all FM sta-

 

During the actual scanning process

 

 

“FM-SCAN”or“AM-SCAN”will be dis

-

 

tions which can be received.

 

 

 

 

Preset Scan

 

ITALIANO

 

 

Press SC for approximately 1 sec. until

 

 

you hear a beep.

 

 

“SCAN” and the name or frequency of

 

NEDERLANDS

The unit will scan all stations stored on

 

the scanned station will alternately ap-

 

 

pear in the display.

 

 

the preset buttons.

 

 

 

 

 

SVENSKA

Press SC once again.

 

To stop Scan / Preset Scan:

 

 

 

 

 

 

 

 

 

 

 

 

 

ESPAÑOL

 

 

 

 

 

 

 

 

 

 

 

PORTUGUÊS

 

 

 

 

31

Tape operation

Cassetten-Scan

Press SC.

“CC-SCAN”will appear in the display. All cassette titles will be scanned briefly.

To stop cassette scan: Press SC once again.

Changer operation

CD-Scan

Press SC briefly.

“CDC-SCAN”will appear in the display.

All CD titles will be scanned briefly. To stop CD-Scan:

Press SC once again.

@PTY (ProgrammeType)

In the PTY mode, the preset buttons become programme type buttons. With every preset you can select one programme type, such as for example NEWS, SPORT, POP MUSIC, EDUCATE, etc.

ADSC (DirectSoftwareControl) Use the DSC function to customise

certain programmable, basic settings to suit your personal needs and preferences. See chapter “DSC programming” for more information.

BAUD

To adjust the treble, bass, balance and fader.

If the display shows “TRE” or “BAS”, you can adjust the reproduction of the treble and bass frequencies with the rocker switch. If “BAL” or “FAD” is displayed, you can set the balance (left/ right) and fader (front/rear).

Press AUD as many times as required and make the setting using the rocker switch.

Treble + / Fader front

Treble – /Fader rear

Bass – /Balance left

Bass + / Balance right

The last setting will be stored automatically.

To switch off AUD: Press button once again.

If the setting remains unchanged within 8 seconds, the display will switch back to the previous condition.

Extra function AUD

Loudness - When listening at a low level, the Loudness function creates a more natural sound by boosting

the low frequency range.

Loudness on/off: Press AUDfor approximately 1 sec.

“LD” lights up in the display if the Loudness function is switched on. Please refer to chapter “DSC programming” for more information on how to program the Loudness boost.

32

Important notes

Precautions

Before starting to use your new car radio, please read the following information carefully.

Traffic safety

Traffic safety always has the highest priority.

As the driver of a motor vehicle, it is your responsibility to pay attention to the traffic situation at all times. Never use your car radio in a way that could distract you.

Please keep in mind that you travel a distance of 14 m per second at a speed of only 50 km/h.

Should the traffic situation become particularly demanding, we advise you not to use the radio.

Always make sure that you are still able to hear any warning signals coming from outside of the vehicle, such as police or fire engine sirens, so that you can react accordingly.

Therefore, you should always select a moderate volume for playing your car radio while you are driving.

Installation

If you would like to install your new car stereo yourself or add other audio components to existing ones, then please read carefully the enclosed instructions on installation and connection.

In order to ensure that the set operates properly it is necessary that the positive power supply line is connected to the ignition and the permanent +12 V lead.

Do not ground the loudspeaker outputs!

Telephone mute

If there is a mobile telephone installed in your vehicle, the radio, tape player or CD player can be muted automatically when the phone is being used.

“PHONE” will then appear in the display. When TA is active, traffic messages will always have priority. The announcement will be aborted by pressing the TA button.

Accessories

Use accessories and spare parts approved by Blaupunkt only.

You can use the following Blaupunkt products with this car radio:

Amplifier

All Blaupunkt amplifiers, the preamp-outcable 7 607 893 093 is required.

Changer

CDC A 05/F 05

(adapter cable 7 607 889 093 is required), CDC A 06

(Woodstock DJ I, Woodstock DJ A):

CDC A 06 included in the delivery.

Remote control

With the infrared remote control RC 06 you can control all of the important functions of your car radio system from the steering wheel.

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS

33

KeyCard theft protection system

This car radio is supplied with one KeyCard

The system will switch off after approximate-

• Push in the KeyCard. The card is re-

as standard, though it can also be operated

ly 10 seconds.

leased and put in the proper position

with a second card.

When inserting another card type (e.g.

for being removed.

If you have lost your KeyCard or if it was

phone or credit card), the display will show

• Remove the first KeyCard and insert

damaged, you can buy a new one from your

“WRONG KC” for approximately 2 seconds.

the new one.

specialised dealer.

The set will switch off automatically.

After the display indication “READY” or

When using a second KeyCard, the settings

Remove the wrong card and introduce the

“LEARN KC”,

stored on the first card will be adopted. How-

correct KeyCard.

• press DSC.

ever, you can individually store the follow-

• Press ON to turn on the set.

Now you can also use the new KeyCard for

ing functions:

 

 

operating your unit.

Bass, treble, balance and fader settings,

Removing the KeyCard

A maximum of two cards can be used for

Loudness, TA (traffic announcement vol-

 

the set.

ume), beep volume.

Never pull out the KeyCard directly!

When trying to “train” a third one, the ac-

In addition, the settings activated before

• First, slightly push in the KeyCard.

cess authorisation for the KeyCard not used

switching the radio off, such as the station

This releases the card and puts it in the prop-

for the “training” process will be deleted au-

tuned in, TA priority, AF, AM ON/OFF and

er position for being removed.

tomatically.

RM ON/OFF will also remained stored.

• Now you can pull it out.

 

This ensures that you will find your basic

 

 

Displaying the radio pass data

settings re-adjustedautomatically as soon

“Training” a second KeyCard/

as you have inserted your KeyCard.

Using the KeyCard supplied with your set

 

Replacing a KeyCard

Putting the unit into operation

While operating the unit with the first

you can have the radio pass data such as

the model name, product number (7 6..) and

• Turn on the set.

KeyCard, you can “train” a second one to serial number indicated on the display pan-

be also used with the set:

el.

With the KeyCard tongue sticking out,

• Insert the first KeyCard and turn on the

Please refer to chapter “DSC programming

introduce the KeyCard into the slot

set.

- READ KC”.

with the contact area showing up.

• Press the DSC button and select

 

The car radio is now ready for operation.

 

“LEARN KC” with / .

 

If a wrong KeyCard is inserted, then “CARD

 

 

 

ERR” followed by “WAIT” will appear in the

• Press << or >>.

 

display. In this case please do not make any

The display will switch to “CHANGE”.

 

further adjustments.

 

 

34