Blaupunkt BOSTON CD189 User Manual

Size:
323.4 Kb
Download

BOSTON CD189

HOUSTON DM189

High-PowerFM/AM/CD Receiver with Detachable Face

OPEN

O

L

 

V

 

PWR

T

U

N

/ T

R

K

SC/PS

AUD

188

WATTS

TS

 

 

 

SENS

MUTE

XBASS

 

 

 

RPT

 

 

MIX

Sales Group —

Blaupunkt Division

2800 South 25th Avenue,

Broadview, Illinois 60153

288E8761

Bosch Group

FCC WARNING

Precautions

Handling the Front Panel

This equipment has been tested and found to comply with the limits for a Class B device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with instructions, may cause harmful interference with radio communications. However, there is no guarantee that radio interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to consult the dealer or an experienced radio/TV technician for help.

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

Avoid installing the unit where it would be subject to high temperatures, such as in direct sunlight or a hot air stream from the heater, or where it would be subject to dust, dirt, or excessive vibration.

Do not turn on the unit if the temperature inside the car is very high. Always cool down the unit before usage. Parking your car in direct sunlight will result in a temperature rise.

If the unit does not turn on, check the connections first. Then check whether the fuse at the back of the unit is blown.

Carefully read this manual before using the unit. If you encounter any problems that are not covered in this manual, please consult the dealer where you purchased the unit or the dealer nearest to you.

This unit has been designed specifically for playback of com-

pact discs bearing the

mark. Other discs cannot be

played.

Features

Detachable Flip down front panel

Built-inpower amplifier

(max. output : 47W × 4ch)

FM/AM PLL Synthesizer tuner

30 Station preset memory

Travel Store / Scan tuning

X-BASSSystem

Station name, Disc name store / Station call

CD changer control (HOUSTON DM189 only)

(CDCA08 & CDCA071*)

*CDCA071 requires adaptor # 7607 898 093 available separately.

Handling Compact Discs

Be careful when removing a compact disk after the playback is completed because the disk may be extremely hot.

Do not expose compact discs to direct sunlight or any heat source.

Check all compact discs before playing, and discard cracked, scratched or warped discs.

Wipe dirty or damp discs outward from the center with a soft cloth.

Do not use any solvents such as commercially available cleaners, antistatic spray, or thinner to clean the compact discs.

Attaching the Front Panel

Place the right hand side of the front panel so that the parts A of the front panel are engaged with the parts B of the unit as shown below. Then push the left hand side of the front panel until it is securely locked.

Front Panel Open / Close

Panel open

Panel close

Press the OPEN .

Raise the front panel with your

 

finger until it locks in place.

E-1

Identification of Controls

Notes

Be sure to use this unit with the front panel closed.

The unit is automatically switched off when the front panel is left open for about 10 minutes.

Do not handle the unit roughly when opening/closing the front panel.

Do not put any object or use it like a tray when the front panel is open in a lying position.

Do not press the OPEN button when closing the front panel.

Do not put much force to the operation buttons or the display window as it may cause damage or deform the unit.

Connectors on the unit and front panel are vital parts transmitting the signal. Do not touch, push and scratch them.

Be careful not to pinch your fingers or hands when opening and closing the front panel.

Do not press hard on the front panel when affixing it to the unit. No more than light to moderate pressure should be needed.

When taking the front panel with you, please use the supplied carrying case to protect the front panel from dirt and damage. Make sure there is no dust or dirt on the electrical terminals on the back of the front panel as this could cause intermittent operation or other malfunctions.

Detaching the Front Panel

1. Press theOPEN firmly to open the flip down front panel.

2. Pull the front panel toward your direction to remove it.

3. Close the inner cover.

Do not leave inner cover in the down position unless the front pannel is in place.

Security

Bolt the front panel with the screw (supplied) in the inner cover as shown below, to protect the front panel from robbery and from getting lost.

SCREW

Ejecting the CD

Press recessed button located to the left behind the Front Panel.

EJECT button

E-2

 

1

2

3

 

 

4

 

5

6

OPEN

PWR

 

 

 

 

188 WATTS

 

 

 

 

L

 

 

 

 

 

 

TS

 

V

O

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

T

 

 

 

 

 

 

 

 

 

 

U

 

 

 

 

 

 

 

 

 

 

N

 

 

 

 

 

 

 

 

 

 

/

 

 

 

 

 

 

 

 

 

 

T

 

 

 

 

 

 

 

 

 

 

R

 

 

 

 

 

 

 

 

 

 

K

 

 

 

 

 

 

 

 

 

 

AUD

SC/PS

 

MIX RPT

XBASS

SENS

 

 

 

 

 

 

MUTE

 

 

 

 

 

 

 

 

 

 

 

 

 

14

 

13

12

11

10

9

8

7

1OPEN button

2PWR button

Turns the power of the unit on or off.

3TUN/TRK button

Used to tune in to the desired station.

4LCD Display window

5CD button

Switches the CD playback mode.

6BND/TS button

Selects the AM/FM Band & Travel store.

7DISP button

Mode selector. Clock adjustment. Display priority setting.

8MUTE/SENS button

Muting the sound. Switches the seek sensitivity between local and distance.

9XBASS button

Boosting the bass sound.

10PRESET MEMORY button

During radio reception :

1 -6 ; For Preset memory During CD mode :

4/MIX

;

For Mix play (Mix & Mix all during CDC;

 

;

HOUSTON DM189 only)

5/RPT

For Repeat play

6/

; For Pause

11DISC SELECT button (HOUSTON DM189 only)

Select the desired CD in CDC(CD changer) mode.

12SC/PS button

Scan tuning. Preset scan tuning. Scan play in CD mode.

13AUD button

Audio control selector; Bass, Treble, Loudness, Balance & Fader

14Dial

Adjusts the volume level/bass/treble/balance/fader.

Storing the station names. Select Alpha-numericcharacters.

MUTE / SENS

General Operations

Volume Level Control and Memory

Rotate the dial to set the memory for the volume level which will be recalled when the unit is turned on.

1. Adjust the volume level. Spinning or fast rotation of the

dial knob will increase the number of turns needed to reach max. volume.

Volume down

Volume up

2. Hold thePWR pressed for more than 2 seconds.

The unit will turn off and the selected max. turn-onvolume level is set in memory.

Note

If the unit is turned off with the volume lower than the memory setting, the unit will return to the lower setting when turned back on.

Muting the sound

Press MUTE / SENS.

“ MUTE ” apeares on the display window.

To restore the previous volume level, press MUTE / SENS again.

Setting the Clock

1.

Turn the ignition key to the ON position.

2.

Press the

PWR

to turn on the unit.

3.

Press the

DISP

to display “ CLK ADJ ”.

A. Press theMUTE / SENS within 3 seconds to flash the “ 12 ” (HOUR ADJ).

B. Rotate the dial to set the hour digit.

C. Press theto flash the “ 00 ” (MIN ADJ).

D. Rotate the dial to set the minute digit.

4. Press theDISP to display “ CLOCK 12 ”.

5. Rotate the dial to select the 12 or24-hourtime mode. Each time you rotate the dial, the mode changes or toggles as follows;

CLOCK 12 Ô CLOCK 24

6. Press theDISP momentarily. The clock is activated.

Ignition-offClock Recall

The display will illuminate showing the time and then automatically shut off after 5 seconds.

Press the DISP while the ignition switch is in the “ OFF ” position.

Mode Selector

Each time the DISP is pressed, the display window will change over as shown below;

Priority STN CALL LEVEL 1

Temporary ( NO NAME )

 

 

 

CLOCK 12

CLK ADJ

METER 1

Display priority setting

Display Priority can be set for the following items;

Radio mode

Frequency and Station Name, plus during

CDC(CD changer) mode (HOUSTON DM189 only)

Track No, Track time and Disc name.

Example

To set Station Name to the Display Priority.

1.

Press the

DISP

three times, and the temporary display

2.

appears in the display window.

Hold the

DISP

pressed for more than 2 seconds.

“ NO NAME” or any station name blinks once to indicate that Station Name is selected for the Display Priority. After 5 seconds, the display mode will automatically return to the Display Priority showing either “NO NAME” or the station name.

Tip

Frequency Display is initially set as the Display Priority, and Station Name (“NO NAME”) is set to “Temporary”.

Adjusting the Sound Characteristics

1. Press theAUD to select the desired adjustment mode.

BASS 0 TREBLE 0 LOUD OFF(LOUDNESS)

 

 

 

R0 F0(FADER)

 

L0 R0(BALANCE)

2. Rotate the dial to adjust the selected item. Adjust within 3 seconds after selecting the item.

After 3 seconds, the dial functions as volume control. Use the following tables as a guide for adjusting the settings in each mode.

BASS

BASS -5

BASS +5

TREBLE

TREBLE -5

TREBLE +5

 

 

 

LOUD

LOUD OFF

LOUD ON

 

 

 

BALANCE

L9 R0(Full left)

L0 R9(Full right)

 

 

 

FADER

R9 F0(Full rear)

R0 F9(Full front)

 

 

 

E-3

BND / TS
MUTE / SENS
TUN/TRK

Radio Reception

Seek Tuning

1. Press theBND / TS to select the desired band.

FM 1 FM 2 FT AM AT

FT & AT are Travel Store bands.

2. Press theto tune in stations. Tuning automatically stops at a broadcasting frequency.

SEEK ” indicator will appear on the display window. When tuned in to FM stereo broadcasting stations, the

” stereo signal indicator will appear on the display window.

Preset Scan Tuning

1.

Press the

BND / TS to select the desired band.

2.

Hold the

SC/PS

pressed for more than 2 seconds.

 

“ SCAN ” indicator will appear on the display window.

 

The unit will scan preset memory for the 12 stations from

 

the AM/AT band or the 18 stations from the FM 1/FM 2/

 

FT bands. The unit will stop at each preset station for 8

 

seconds, before continuing to the next preset station.

 

Press the

SC/PS

again to stop Preset Scan Tuning and

remain this on the selected frequency.

Manual Tuning

1.

Press the

BND / TS

to select the desired AM or FM band.

2.

Press the

TUN/TRK

or

TUN/TRK

for more than 0.5 sec-

ond to activate the manual tuning mode. Press again to tune in to stations.

“ MANUAL ” indicator will appear on the display window. After 4 seconds of completing Manual Tuning, the tuning control will revert to the Seek Tuning mode.

Memorizing Stations Automatically (Travel Store)

1. Press theBND / TS to select the desired band.

2. Hold thepressed for longer than 2 seconds. Up to 6 stations with strong signals will be automatically stored in preset memory for the selected band.

Note

This function is available for FT and AT.

Scan Tuning

1.

Press the

BND / TS to select the desired band.

2.

Hold the

SC/PS pressed for less than 2 seconds.

The unit will scan the selected band for stations.

“ SCAN ” indicator will appear on the display window. Press the SC/PS again to stop Scan Tuning and remain this on the selected frequency.

Tip

While tuning, the pie-shapedsignal-strengthmeter

on the display is lit differently depending on the strength of the signal. While scanning bands, the pie-shapedsig-nal-strengthmeter spins. While playing CD’s, this display spins also.

Memorizing Only the Desired Stations

You can store up to 6 stations on each band (18 for FM 1, FM 2 and FT, 12 for AM and AT) in the order of your choice.

1.

Press the

BND / TS to select the desired band.

2.

Press the

TUN/TRK

to tune in stations.

 

3.

Press and hold the desired preset memory button 1 -

 

6

for about 2 seconds until the frequency indicator

flashes twice.

The number of the pressed preset memory button appears on the display window.

Note

If when you store another station on the same preset number button, the previously stored station is replaced with new one.

Receiving the Memorized Stations

1.

Press the

BND / TS

to select the desired band.

2.

Press the

1 - 6

momentarily.

Local/Distant (LO/DX) Selection

This feature is used to select the strength of the signals at which the radio will stop during Seek Tuning.

Press the for more than 2 seconds to select the Local setting and only strong (local) stations will be received. The “ lo ” indicator appears on the display window.

Pressing again will select the Distant setting and the radio will stop at a wider range of signals, including weaker more distant stations. The “ lo ” indicator will go out on the display window. DX is the suggested default setting.

E-4

TUN/TRK
TUN/TRK

Storing the station names

You can assign a name to each radio station and store it in memory. As many as 30 station names can be stored, composed with 8 characters each.

Storing the station names

1.

Tune in a station whose name you want to store.

2.

Press the DISP for more than 2 seconds.

 

The “ NAME EDT ” will light then the “ _ _ _ _ _ _ _ _ ” on

 

the display window. The first “ _ ” flashes.

3. Enter the characters.

A.Rotate the dial in a clockwise direction to select the

desired characters.

( A B C . . . Z < > + − ′ /

0 1 2 3...9 “ ”Space )

B. Press theto move the flashing cursor to the next position. If you press, the flashing cursor moves to the left.

C. Repeat steps A and B to complete entering the entire name 8 characters max.

Tip

To erase/correct a name, press the DISP for more than 2 seconds to clear the character andre-enter.

4.

Press the

MUTE / SENS to store the station name.

 

The station name flashes.

5.

To return to the normal radio reception, Press DISP .

Erasing the station names

1.

Tune in any station and press the DISP for more than 2

 

seconds.

 

2.

Press the

MUTE / SENS .

 

The station name or “ _ _ _ _ _ _ _ _ ” is now flashing.

3.

Rotate the dial to select the name of the station that you

 

want to erase. To erase all the name of the station, dis-

 

play “ ALL DEL ”.

4.

Press the

DISP for more than 2 seconds.

 

Repeat steps 3. and 4. if you want to erase other names.

5.

To return to the normal radio reception, Press DISP .

Direct Access to Memorized Stations via

Station Call

You can search for the memorized AM & FM station names in the memory.

1.

Press the

DISP to display the “ STN CALL ” on the dis-

 

play window.

2.

Rotate the large dial to select the desired station name.

3.

Press the

MUTE / SENS to tune in the desired station.

Level Meter selection

The meter displays can be selected from four types.

You can select :

METER 1 : Type that the level meter goes upward.

METER 2 : Type that only the very top segment lights.

METER 3 : Type that the remaining segments light. (op-

 

 

 

 

posite of METER 2)

• METER 4

: Type that the level meter goes up and down

 

 

 

 

dividing from the center segment.

• METER 0

: No meter is indicated.

1.

Press the DISP to display the “ METER 1 ” on the display

 

window.

2.

Rotate the dial to select the desired meter indication.

 

METER 1 METER 2 METER 3 METER 4 ME-

 

TER 0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

L-chLevel meter

R-chLevel meter

E-5

Level Meter Sensitivity selection

The sensitivity of the level meter display can be switched.

You can select :

LEVEL 1 : Normal sensitivity

LEVEL 2 : High sensitivity

1.

Press the DISP to display the “ LEVEL 1 ” on the display

 

window.

2.

Rotate the dial to select the desired meter sensitivity.

 

LEVEL 1 Ô LEVEL 2

Enhancing the bass sound

For extended bass centered @ 72Hz, the XBASS function can be set for either each band and CD mode.

You can select :

XBASS 1 : Enhanced BASS level (low)

XBASS 2 : Enhanced BASS level (Middle)

XBASS 3 : Enhanced BASS level (High)

XBASS 4 : Enhanced BASS level (Very high)

XBASS 0 : No BASS enhanced/off

Press the XBASS repeatedly to select the bass sound. “” appears on the display window.

Each time you press XBASS , the current mode appears on the display window and then the mode change as follows: XBASS 0 XBASS 1 XBASS 2 XBASS 3 XBASS 4

TUN/TRK

CD Operations

Playing the CD player

Loading Discs

1. Press theOPEN and insert the disc.

2. Close the front panel. Playback begins automatically.

‘‘ LOADING ’’ indicator will flash in the display window.

Note

Make sure that the front panel is closed when playback begins.

Playback with the front panel open causes the unit to turn off automatically in about 10 minutes.

Labelled side up

! NEVER Insert a 3-inchCDs.

This unit is designed for playback of standard 5-inchCD’s only. Do not attempt to use3-inchCD singles in this unit, either with or without an adaptor, as damage to the player and/or disc may occur.

Tips

When a CD is loaded, the on the display remains lit.

During playback of a CD, the pie-shapedsignal-strengthmeterspins.

Listening to a disc that is already loaded

Press the

CD to select the CD mode.

Playback begins automatically.

Pausing Playback

Press the

6/ .

To resume playback, press the 6/ again.

Stopping Playback

Press the

BND / TS to select the radio reception (FM 1, FM 2,

FT or AM, AT).

Ejecting Discs

Press theto eject the disc located behindflip-downfront panel.

Notes

The unit will turn on automatically when a CD is inserted if the ignition switch is ‘‘ON’’.

When the disc is ejected from the CD slot, remove it within 10 seconds; otherwise, the disc will be reloaded automatically.

Track Search

Press theduring CD mode. Track numbers appear in the display window.

: Playback starts from the beginning of the next track.

: Playback starts from the beginning of the current track. Press again to play the previous track.

Cue / Review

Press and hold the TUN/TRK . Release when you have found the desired point.

: To search forward.

: To search backward.

Scan Play

Press the SC/PS during CD mode.

The ‘‘ SCAN ON ’’ indicator appears in the display window. This will play the first 10 seconds of all the tracks on the disc.

Press the SC/PS again to cancel this feature.

Repeat Play

Press the 5/RPT during CD mode.

The ‘‘ RPT ON ’’ indicator appears in the display window and the current track is played repeatedly.

Press the 5/RPT again to cancel this feature.

Mix Play

Press the 4/MIX during CD mode.

All the tracks on the current disc are played in random order. Press the 4/MIX again to cancel this feature.

E-6

TUN/TRK
TUN/TRK
TUN/TRK

CD Changer Controls (HOUSTON DM189 only)

Playing the CD Changer

This product can control a CD changer. Please check with your nearest car stereo specialist for recommendations of the models that will work with this radio (See page 1).

Press the CD to switch the CD changer mode. Disc No, Track No, and Track time appear on the display window and playback begins automatically. Press again to change back to builtin CD operation.

Disc Select

Press the Disc select buttons to select the desired disc for play.

+ / 2 : To advance to a higher number disc.

- / 1 : To return to a lower number disc.

Track Search

Press the.

Track numbers appear in the display window.

: Playback starts from the beginning of the next track.

: Playback starts from the beginning of the current track. Press again to play the previous track.

Cue / Review

Press and hold the

TUN/TRK

. Release when you have found

the desired point.

: To search forward.

: To search backward.

Track / Disc Scan Play

Track Scan

Press the SC/PS .

The ‘‘ SCAN ON ’’ indicator appears in the display window. This will play the first 10 seconds of all the tracks on the disc.

Press the SC/PS again to cancel this feature.

Disc Scan

Press the SC/PS for more than 2 seconds.

The ‘‘ DSCAN ON ’’ indicator appears in the display window. This will play the first 10 seconds of the first track on each disc.

Press the SC/PS again to cancel this feature.

Track / Disc Repeat Play

Track Repeat

Press the 5/RPT .

The ‘‘ RPT ON ’’ indicator appears in the display window and the current track is played repea.tedly.

Press the 5/RPT again to cancel this feature.

Disc Repeat

Press the 5/RPT for more than 2 seconds.

The ‘‘ DRPT ON ’’ indicator appears in the display window and the current disc will be continually repeated.

Press the 5/RPT again to cancel this feature.

Track / Disc Mix Play

Track Mix

Press the 4/MIX .

The ‘‘ MIX ON ’’ indicator appears in the display window.

All the tracks on the current disc are played in random order.

Press the

4/MIX

again to cancel this feature.

 

Disc Mix

 

 

 

Press the

4/MIX

for more than 2 seconds.

 

The ‘‘ MIX ALL ’’ indicator appears in the display window.

Both discs and tracks will be played in random order.

Press the

4/MIX

again to cancel this feature.

 

Tip

 

 

 

During Disc scan, Disc Repeat or Disc Mix, the

will be lit

on the display.

 

 

E-7

Storing the disc names

You can label each disc with a personalized name. As many as 99 disc names can be stored, composed with 7 characters each.

Storing the disc names

1. Play the CD and press theDISP for more than 2 seconds. The “ NAME EDT ” will light then the “ _ _ _ _ _ _ _ ” on the display window. The first “ _ ” flashes.

2. Enter the characters.

A.Rotate the dial in a clockwise direction to select the

desired characters.

( A B C . . . Z < > + − ′ /

0 1 2 3...9 “ ”Space )

B. Press theto move the flashing cursor to the next position. If you press, the flashing cursor moves to the left.

C.Repeat steps A and B to complete entering the entire name 7 characters max.

Tip

To erase/correct a name, press the DISP for more than 2 seconds to clear the character andre-enter.

3.

Press the MUTE / SENS to store the disc name.

 

The disc name flashes.

4.

To return to the normal CD playback mode, Press DISP .

Erasing the disc names

1.

Press the

DISP

for more than 2 seconds during CD

 

changer mode.

 

2.

Press the

MUTE / SENS .

 

The disc name or “ _ _ _ _ _ _ _ ” is now flashing.

3.

Rotate the dial to select the name that you want to erase.

 

To erase all the name, display “ ALL DEL ”.

4.

Press the

DISP

for more than 2 seconds.

 

Repeat steps 3. and 4. if you want to erase other names.

5.

To return to the normal CD playback mode, Press DISP .

Installations

Supplied Mounting Hardware

Mounting Strap Use

3. Attaching the Mounting Strap to the underside of the dash board, using screw.

Attach the back of the unit to the Mounting Strap using the support stem bolt and hardware.

Sleeve

Bushing

Mounting Strap

Release

& Screws

and Screw

Keys

 

Precautions

Be sure to detach the front panel before you start installing the unit.

When mounting the unit in a car, keep the unit as level as possible. If the unit must be mounted at an angle, due to the design of the vehicle, make sure that the unit does not lit by more than 30˚.

Choose the mounting location carefully so that the unit will not interfere with the normal driving operations of the driver.

Use only the supplied mounting hardware for a safe and secure installation.

Mounting Example

Installation in the dashboard.

1. Install the sleeve in the dashboard.

2. Select and bend the appropriate tabs to hold the sleeve firmly in place.

Bushing Use

3. As shown in the figure below, securely fasten the screw, which has been inserted into the bushing, to the rear of the set.

Fire wall

The distance to the fire wall is various due to the type of the car. Be sure to secure the unit by properly inserting the bushing.

Caution

Insufficient fastening of the screw may cause some CD’s to skip.

If your car has no accessory position on the

ignition key switch (POWER SELECT switch)

The illumination on the front panel is factory-setto be turned on even when the unit is not being played. However, this setting may cause some car battery wear if your car has no accessory position on the ignition key switch. To avoid this battery wear, set the POWER SELECT switch located on the bottom of the unit to theB position, then press the reset button. The illumination is reset to stay off while the unit is not being played.

Reset button

Press the reset button with the point of a sharp object such as a ball-pointpen.

POWER SELECT SWITCH (Located on the bottom of the unit)

Change the position with a jeweler’s screwdriver, etc.

A: Your car has an accessory position on the ignition switch.

B: Your car has no accessory position on the ignition switch.

Be sure to press the reset button after changing the switch and connecting the lines.

E-8

Connections

Caution

Connect each pair of speaker leads only to a single speaker (or speaker system) that has an impedance of least 4 ohms, as well as 47 watts power-handlingcapability.

Do not connect speaker leads to any inputs on external amplifiers. This will cause damage to the internal amplifier of this unit.

Connection procedure

Warning

To prevent short circuit, remove the key from the ignition and disconnect the battery’s (–)(minus) terminal.

•This unit is designed for negative ground 12 V DC operation only. You can not use it for 24 V or other types of car batteries.

1Make sure the car’s ignition key has been removed.

2Disconnect the minus terminal of the car’s battery.

3Connect the wiring harness wires in the following order : GND (Black), BTT (Yellow), ACC (Red) and ANTENNA REMOTE (Blue), and tape each so they do not come in contact with each other.

4Connect the speaker wires of the wiring harness.

5Connect the car’s antenna terminal to the antenna socket of the unit.

6Connect the detachable wire harness to the unit.

7Reconnect the minus terminal of the car’s battery.

8Start the car’s engine.

9Make sure the unit operates properly.

Connection Example

HOUSTON DM189 only

For connection to optional CD changer

FUSE (10A)

ADDITIONAL

SPEAKERS DETACHABLEEXTERNAL WIRE HARNESS AMPLIFIER

REMOTE

(IF ANY)

BLUE

LEFT FRONT

SPEAKER ANTENNA REMOTE

(IF ANY)

WHITE W/BLACK STRIPE

WHITE

GREEN W/BLACK STRIPE

 

 

GREEN

LEFT REAR

SPEAKER

 

 

PRE-AMP

 

OUTPUTS

 

ANTENNA

REAR OF UNIT

SOCKET

 

YELLOW

BATTERY

 

(CONSTANT

 

POWER)

RED

RIGHT FRONT

 

SPEAKER

 

IGNITION SWITCH

BLACK

GROUND

GRAY

GRAY W/BLACK STRIPE

VIOLET

 

VIOLET W/BLACK STRIPE

 

RIGHT REAR

 

SPEAKER

E-9