Blaupunkt BOSCH GRUPPE RMD 169 User Manual

Size:
500.24 Kb
Download

Radio / MD

Dallas RMD 169

Texas DJ

Operating instructions

1

2

3

4

5

13

12

11

10

9

8

7

6

19

14

15

18

Option / Optional /

Tilval / Optie /

 

 

 

Opcional / Opção

2

20

21

1

3

17 16

2

Contents

Condensed instructions ..............

39

Remote control RC 08 (optional) ..

46

Important ......................................

47

Read the following before using

 

the unit ..................................................

47

Traffic safety .........................................

47

Installation .............................................

47

Telephone mute ....................................

47

Accessories ..........................................

47

Guarantee .............................................

47

International hotline ..............................

47

KeyCard anti-theftprotection

 

system ...........................................

48

Switching on the unit ............................

48

Removing the KeyCard ........................

48

“Teaching in” a second KeyCard/

 

replacing the KeyCard ..........................

48

Displaying the radio passport data .......

49

Visual display for anti-theftprotection ..

49

Care of the KeyCard .............................

49

KeyCard lost/damaged .........................

49

Teaching in the new KeyCard ..............

49

Selecting the operating mode ....

50

Enhancing the display legibility . 50

Radio operation with RDS ...........

51

AF - alternative frequency ....................

51

REG Regional .......................................

51

Selecting the frequency band ...............

52

Station tuning ........................................

52

Paging through the transmission chains

(FM only) ...............................................

52

Changing the memory level (FM) .........

53

Storing stations .....................................

53

Automatically saving the strongest

 

station with Travelstore ........................

53

Calling up stored stations .....................

53

Sampling stored stations with

 

Preset Scan ..........................................

54

Sampling stations with Radio Scan ......

54

Changing the sampling time (Scan) .....

54

Changing the sensitivity of the seek run . 54

Toggling between stereo and mono

 

(FM) ......................................................

54

Automatic bandwidth switching

 

(SHARX) ...............................................

55

PTY – Programme Type .......................

55

Programme type ...................................

55

Traffic programme reception

 

with RDS-EON ..............................

58

Activating/deactivating priority for

 

traffic programmes ................................

58

Warning tone ........................................

58

Automatic seek run ...............................

58

Adjusting the volume for traffic an-

 

nouncements and the warning tone .....

58

MiniDisc mode/

 

CD changer mode ........................

59

Inserting a MiniDisc ..............................

59

Removing the MiniDisc .........................

59

Activating MiniDisc mode .....................

59

MD text ..................................................

59

Activating CD changer mode ................

60

Selecting the display type .....................

60

Selecting tracks and CDs .....................

60

Repeating tracks and CDs ...................

60

TPM (Track Program Memory) .............

61

MIX ........................................................

62

SCAN ....................................................

62

Assigning a name to CDs .....................

62

Deleting the CD name/TPM store

 

using DSC-UPDATE .............................

63

Clock - time ...................................

64

Setting the time .....................................

64

Displaying the time ...............................

64

Correcting the time following an

 

interruption to the power supply ...........

64

Deactivating hours adjustment .............

64

Equalizer setting ..........................

65

Adjustment instructions ........................

65

Tips on adjusting the equalizer ............

67

Programming with DSC ...............

68

Overview of the factory default

 

settings with DSC .................................

70

Technical data ..............................

71

Glossary ........................................

71

Installation and

 

connection instructions ............

289

38

Condensed instructions

1Disengaging the fold-downcontrol panel

Disengage the control panel to insert or remove the KeyCard and MiniDisc.

To disengage the control panel, press knob 1: the control panel folds down. The control panel cannot be removed, nor should it be used a shelf. To reengage the control panel, push it back into its original position (Arrow 3).

2

1

3

For safety reasons, the control panel must always be engaged whilst the vehicle is moving.

When leaving the vehicle, open the control panel and remove the KeyCard in order to prevent theft.

2ON

Switching on the unit

Insert the KeyCard and press ON briefly. The unit is switched on in the last operating mode selected and with the previously selected volume.

Switching off the unit

Press ON for approx. 1 second.

The display can be adjusted for the desired viewing angle in order to improve legibility. Refer to “Improving the legibility of the display” if necessary.

Switching the sound on/off

Press ON briefly. “MUTE” appears on the display when the sound is switched off.

To switch the sound back on again, turn the volume knob 3.

Switching the unit on/off using the KeyCard

Insert/remove the KeyCard to switch the unit on and off.

Refer also to the description of the KeyCard anti-theftsystem @ in the condensed instructions.

Switching on/off by the ignition

The unit may be connected up such that it is switched on and off by the vehicle ignition.

When the ignition is switched off, a double beep reminds you to remove the KeyCard before leaving the vehicle.

Switching on whilst the ignition is off

With the ignition off (and the KeyCard inserted), proceed as follows to operate the unit:

Press ON when the double beep sounds.

The unit is switched on.

The unit switches itself off automatically after an hour’s use in order to prevent the vehicle battery from running down.

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS

39

Condensed instructions

3Adjusting the volume

Turn the knob to adjust the volume.

The selected value is shown on the display. When switched on, the unit plays at the preselected volume (ON VOL).

ON VOL can be changed (refer to “Programming with DSC – ON VOL”).

4Softkeys/display

Softkey = key with variable function The functions shown in the display can be selected.

Radio mode

In radio mode, use TU to toggle between menu level 1 and menu level 2. The system automatically returns to menu level 1 when no key has been pressed for eight seconds.

Menu level 1

Station keys and memory levels

NEXT - FM

Switch between the memory levels FM I, FM II, FM T.

NEXT - AM (MW, LW)

Switch between the MW and LW frequency bands.

ST1 - ST6

ST1ST6 can be used on this menu level to store radio stations on the FM levels I, II and “T”.

You can store six stations each on the MW and LW bands.

Store station – hold one of the station keys ST1ST6 down until the programme can be heard again (beep).Call up station – select the frequency band. On FM, select the memory level usingNEXT and press the appropriate station key briefly.

Menu level 2

Adjusting radio functions

NEXT - FM

Switch between the memory levels FM I, FM II, FM T.

NEXT - AM (MW, LW)

Switch between the MW and LW frequency bands.

BND

Select the frequency band and memory level (FM I, FM II, FM T, MW, LW).

SCA - Scan

a) PTY is deactivated

(logo is lit normally, not in reverse video)

Press SCA (Radio Scan) briefly – “SCAN” appears in the display alternately with the code of the sampled station. All stations on the frequency band which can be received are sampled briefly.

40

Condensed instructions

Press SCA for approx. 1 second (Preset Scan) –

a beep sounds, “SCAN” appears in the display alternately with the code of the sampled station.

The stations stored on the station keys and which can be received are sampled briefly.

Stopping Radio Scan/Preset Scan: Press SCA or the seek rocker again.

b) PTY is activated (logo appears in reverse video on the display)

Press SCA

the stations transmitting the selected PTY programme type are sampled briefly.

AF

(AlternativeFrequency in RDS mode) If “AF” appears in reverse video in the display, the radio automatically looks for a frequency with better reception for the same station.

AF on/off: Select menu level 2 using TU and pressAF briefly.

EXIT

To terminate or abort the adjustment process, press the key briefly.

ENT (Enter)

To accept/save the adjustments, press the key briefly.

TS (Travelstore)

Press TS to switch from any frequency band to FMT. The six strongest stations are automatically stored.

When they have been stored, the strongest station is selected and played.

PTY (ProgrammeType)

PTY turns the station keys into programme type keys.

”PTY” must first appear on the display in reverse video (Press PTY if necessary).

A programme type such as NEWS, SPORT, POP can now be stored and selected with each station key.

Call up PTY programme types using the rocker << >> and press the station key to store (hold down for approx.

2 seconds until the beep sounds).

TA (priority forTrafficAnnouncements)

”TP” is displayed when a traffic programme station is being received. ”TA” is displayed when priority for traffic programme stations is activated. Only traffic programme stations are played.

Priority on/off: Press TA.

Abort traffic announcement: Press TA orEXIT.

MiniDisc and CD changer mode

MIX, SCAN, RPT (repeat) and TPM can be selected in MiniDisc and CD changer mode by means of the corresponding softkeys.

MIX

MiniDisc and CD tracks can be replayed in random order.

You can select the following functions by pressing the MIX key:

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS

41

Condensed instructions

-MIX MD/MIX CD = Tracks on the MiniDisc or CD (in CD changer mode) are played in random order. In CD changer mode, CDs are selected in numerical order, tracks are replayed in random order.

-MIX MAG (CD changer mode only) = All tracks in the magazine are played in random order.

-MIX OFF = Switches off function.

SCA - Scan

For sampling the tracks briefly (in CD changer mode, the tracks of all CDs).

Starting Scan:

Press SCA. The tracks are sampled briefly in ascending order. The sampling time can be adjusted.

(Refer to “Programming with DSC – SCANTIME”.)

Ending Scan:

Press SCA. The last track selected continues playing.

RPT - Repeat

MiniDisc tracks and, in CD changer mode, CD tracks and CDs, can be repeated.

Press the RPT key to select the following functions:

-REP TRCK = Repeat track

-REP CD = Repeat CD (only in CD changer mode)

-RPT OFF = Switches off function.

TPM - TrackProgramMemory For storing and playing preferred tracks in MiniDisc and CD changer

mode. Up to 30 MiniDiscs can be managed in MiniDisc mode and 99 CDs in CD changer mode with a maximum of 40 tracks each. (Refer to the “TPM programming” section.)

CLR

For clearing the TPM memory (refer to the “Clearing the TPM memory” section).

5DPE

For activating/deactivating the equalizer and changing the equalizer settings.

Activating/deactivating the equalizer: Press DPE until the beep sounds. When the equalizer is activated, “EQ” appears in the display.

Changing the equalizer settings: Press DPE briefly. Further information on changing the equalizer settings: “Equalizer settings”:

6Rocker

Radio mode

If the rocker is pressed on menu level 2, menu level 1 is automatically called up.

/ Station seek

Up

Down

<</>> Up/down in steps (on FM only when AF and PTY are deactivated)

On FM only:

<</>> Page through the transmission chains when AF is activated and PTY deactivated,

e.g.: NDR 1, 2, 3, 4, N-JOY ... .

42

Condensed instructions

MiniDisc and CD changer mode

CDC mode

Select CD

>> Up: Press briefly.

<<Down: Press briefly.

Select track

Up: Press briefly.

CUE - fast forward (audible):

Keep depressed

Down: Press twice or more in quick succession

Replay track from beginning:

Press briefly

REVIEW - fast rewind (audible):

Keep depressed

MD mode

Select track

/>> Up: Press briefly

CUE - fast forward (audible):

Keep depressed

/<< Down: Press twice or more in quick succession

Replay track from beginning:

Press briefly

REVIEW - fast rewind (audible):

Keep depressed

Further functions of the rocker:

Further settings available with

AUD 8

DSC-MODE7

PTY

The settings are available only if the corresponding function is activated.

7DSC (DirectSoftwareControl)

You can adjust programmable default settings using DSC.

Further information: “Programming with DSC”.

8AUD

For adjusting the treble, bass, balance (left/right), fader (front/rear) and loudness settings.

Loudness = adjustment of the lowvolume sounds to the human ear.

Different treble, bass and loudness settings can be stored for the FM, AM, MD, AUX and TA modes.

Adjustment procedure:

Select mode.

Press AUD once: “BASS” and the selected value appear on the display.

Select from the options using << / >>. Use/to change the settings.

The values selected are shown on the display. The last setting selected is stored automatically.

Particular feature of loudness:

The values can be selected between LOUD 6 and LOUD OFF by means of the rocker /.

Leaving AUD:

Press EXIT.

If no change is made within eight seconds, AUD is automatically switched off.

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS

43

Condensed instructions

9DIS

Selecting various display modes. Radio mode

Press DIS briefly:

-Name of the selected station

-Currently selected frequency

-PTY code

A condition is that an RDS station can be received with an adequate field strength.

Press DIS for approx. two seconds: Toggle display between time and wavelength (incl. memory level in the case of FM).

MiniDisc mode

Press DIS briefly:

-Track number, time

-Track number, time played

CD changer mode

Press DIS briefly:

-CD number, track number, time

-CD number, track number, time played

-CD name, track number

:Display

NDR2

-

Station name

FM

-

Frequency band

I, II, T

- Memory level I, II or Travel-

 

 

store

TP, TA

- TP = Traffic Programme (traf-

 

 

fic programme station is be-

 

 

ing received)

 

- TA = Priority for traffic pro-

 

 

gramme station is activated

PTY

- Programme type is activated

AF

-

Alternative frequency with

 

 

RDS

lo

- Seek sensitivity can be se-

 

 

lected with DSC

EQ

-

Equalizer is activated

DISC-IN

-

MiniDisc is inserted

TRACK 13 -

Track number

or

 

 

VIVALDI

-

CD name (CD changer

 

 

mode)

or

 

 

CD 5 T 2

-

CD number and track number

 

 

(CD changer mode)

MIX

-

Tracks can be played in ran-

 

 

dom order

SCA

-

Sample tracks

RPT

-

Repeat function for MiniDisc/

 

 

CD changer mode

TPM

-

Save and play preferred

 

 

tracks

CLR

-

Clear TPM memory

FM I, II, T

-

FM memory level

or

 

 

MW, LW

-

Frequency band

or

 

 

00:20

-

Time (time played)

or

 

 

12:50

-

Time

44

Condensed instructions

;CDC

Switch to CD changer mode (only if a CD changer is fitted).

If a CD changer is not fitted, AUX is selected. Condition: AUX ON must be selected in the DSC menu.

<MD

Switch to MiniDisc mode.

=TU (TUNER)

Switch to radio mode.

For switching to the FMI, FM II, TS (Travelstore), MW and LW memory levels/frequency bands.

>Slot for MiniDisc

When the MiniDisc is inserted in the direction indicated by the arrow with the label facing upwards, it is automatically transported into the operating position. MiniDisc play mode is selected automatically.

?Visual anti-theftprotection

The following conditions must be met if the LED is to flash as a visible antitheft protection measure:

The unit is switched off; The control panel is open; The KeyCard is removed;

The ignition is off and LED ON is selected in the DSC menu (default factory setting).

Further information: “Programming with DSC, LED ON/OFF”.

@KeyCard anti-theftprotection system

The KeyCard must be inserted before the unit can be operated.

KeyCard

Inserting the KeyCard

To disengage the control panel, press key 1. The control panel folds down.

Insert the KeyCard with the contact surface facing downwards (see diagram). Engage the control panel.

2

1

3

Remove the KeyCard following the procedure in reverse.

Important: read the information under “KeyCard anti-theftprotection system”.

AEject

Hold the key for MiniDisc ejection down for approx. 2 seconds: the MiniDisc is ejected.

For safety reasons, the control panel must always be engaged whilst the vehicle is moving.

When leaving the vehicle, open the control panel and remove the KeyCard in order to prevent theft.

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS

45