Blaupunkt BOLOGNA RCR 126 User Manual

Size:
152.16 Kb
Download

Radio / Cassette

Bologna

RCR 126

Operating instructions

1

2

3

4

5

6

7

8

9

10

11

12

13

19

18

17

16

15

 

DEUTSCH

 

 

 

 

 

ENGLISH

 

 

 

 

 

FRANÇAIS

 

 

 

 

 

ITALIANO

 

 

 

 

14

NEDERLANDS

 

 

 

 

 

 

SVENSKA

 

 

 

 

 

ESPAÑOL

 

 

 

 

 

PORTUGUÊS

 

 

3

Contents

 

Short instructions ........................

19

Important notes ............................

22

Precautions ...........................................

22

Traffic safety .........................................

22

Installation/Connection ..........................

23

Anti-theftprotection .....................

23

Release panel .......................................

23

Detaching the release panel ..............

23

Fitting the release panel ....................

23

Security code ........................................

23

Entry of a wrong code number ..............

23

Switching on security coding .................

24

Re-startfollowing an interruption of the

 

power supply .........................................

24

Switching off security coding .................

24

Optical indication for extra security .......

24

Radio operation with RDS ...........

25

AF - Alternative frequency ....................

25

REG - regional programme ...................

25

Selecting a waveband ...........................

26

Automatic tuning ................................

26

Manual tuning ....................................

26

Scrolling through the broadcasting

 

network (only FM) .................................

26

Changing the memory bank (FM) .........

26

Storing stations .....................................

27

Automatically storing the strongest

 

stations with Travelstore .......................

27

Recalling stored stations .......................

27

Scanning stored stations

 

with Preset Scan ...................................

27

Scanning stations with Radio-Scan ......

28

Selecting the seek tuning sensitivity .....

28

Switching from stereo to mono (FM) .....

28

Receiving traffic programme

 

stations with RDS-EON ................

29

Traffic announcement priority on/off .....

29

Warning beep ........................................

29

Switching the warning beep off ..........

29

Automatic seek tuning start ...................

29

Adjusting the volume for traffic

 

announcements and the warning beep . 29

Tape operation ..............................

30

Inserting a tape .....................................

30

Removing a tape ...................................

30

Fast Forward/Rewind ............................

30

PROG selector ......................................

30

DSC programming ........................

31

Overview of the DSC factory settings ...

32

Appendix .......................................

32

Care notes ............................................

32

Release panel ....................................

32

Mechanism/cassette tapes ................

32

Specifications ........................................

32

18

Short instructions

1On OffVolume

This unit can also be switched on and off with the Release Panel B.

Also, when being connected correctly, you may turn the radio on and off via the ignition of your car.

Use one of the following possibilities to continue operating the set when the ignition is switched off:

a)Switch on/off with knob 1.

b)Remove/re-installthe release panel.

c)Press AUD 3.

When turning on the unit with the release panel or by pressing the AUD button, the system will start to play with the volume adjusted last.

When operating the unit with the ignition being switched off, the system will automatically shut down after one hour in order to avoid that the battery goes flat.

2LD

Loudness - When listening at a low level, the Loudness function creates a more natural sound by boosting the low frequency range.

To switch the Loudness on/off: Press LD.

For more information, read chapter “DSC programming”.

3AUD/GEO

AUD –

To adjust the treble and bass frequencies with the rocker switch.

Treble +

Treble

Bass

Bass +

GEO –

 

DEUTSCH

 

 

To adjust the balance (left/right) and

 

 

fader (front/rear) with the rocker switch.

 

 

 

ENGLISH

 

 

 

 

 

 

 

 

Fader front

FRANÇAIS

 

Fader rear

 

Balance left

 

Balance right

 

ITALIANO

To alter a setting,

 

• press AUD orGEO and then chan-

 

ge the value with the rocker switch.

 

 

NEDERLANDS

The adjusted value is indicated in the

 

display.

 

The last setting will be stored automati-

 

cally.

 

 

To finish the setting: Press AUD or

SVENSKA

GEO.

 

If the setting remains unchanged within

 

8 seconds, the display will switch back

 

to the previous condition.

 

ESPAÑOL

 

 

 

 

 

 

 

 

 

 

PORTUGUÊS

 

 

 

19

4DSC (DirectSoftwareControl) Use the DSC function to customise

certain programmable, basic settings to suit your personal needs and preferences. See chapter “DSC programming” for more information.

5AF -Alternativefrequency duringRDS operation

When “AF” lights up in the display, the radio will automatically search for a frequency offering better reception of the same RDS programme.

To switch AF on/off: Press AF briefly.

6REG

REG ON / REG OFF

With REG ON the system will only switch to a better alternative frequency if the latter belongs to a linked station offering the same regional programme (see “REG - regional programme). To switch REG on or off: Press REG

until “REG ON” or “REG OFF” appears in the display (BEEP tone).

7lo/dx

To alter the automatic seek tuning sensitivity.

If “lo” is displayed, the radio will only pick up strong, local stations (low sensitivity).

If “lo” does not light up, the radio will also pick up weaker, distant stations (high sensitivity).

To switch over: Press loor dxbriefly. For more information, see chapter “DSC programming”.

8Cassette removal

Press .

9Cassette loading slot

Insert tape (side A or 1 up; the open side facing to the right).

:Display

Radio operation:

NDR1 NDS - Station abbreviation or frequency

FM

- Waveband

T

- Memory bank (I, II, T)

5

- Preset button (1 - 6)

 

- Stereo

lo

- Seek tuning sensitivity

AF

- Alternative RDS frequency

TP

- Traffic programme identifier

TA

- Priority for traffic programme

 

stations

LD

- Loudness

Tape operation:

TR1--PLAY- Side 1 (or 2)

20

;PROG button/Fast winding

To switch to the other side of the cassette tape:

Press both buttons simultaneously.

The display shows TR1-PLAYorTR2-PLAY.

Fast winding

FR : Fast rewind; stop by pressing FF.

FF : Fast forward; stop by pressing FR.

<SC

Radio operation

Scan (sampling all stations to be received): PressSC briefly.

=PS

PresetScan (sampling all stations stored on the preset buttons): PressPS briefly.

>1, 2, 3, 4, 5, 6 - preset buttons

You can store six stations on each FM memory bank (I, II, T).

To store a station: Press button during radio operation and hold down until the radio resumes play.

To recall a station: Select the waveband and on FM also the desired memory bank (press FMT button as many times as required). Then press the corresponding preset button briefly.

Extra function:

Coding: Read chapter“Anti-theftprotection” first.

Buttons 1, 2, 3, 4 - To enter the fourdigit code.

Press each of the buttons as many times as required until the code number given in the car radio passport stands in the display.

?TA (priority fortrafficannouncements)

If “TA” is displayed, the system will play traffic stations only.

TA on/off: Press button.

@M•L

To select the MW or LW waveband. Press button as many times until the desired band is adjusted.

AFMT - FM, Travelstore

To switch between the FM memory banks I, II and “T” (Travelstore).

To switch over:

Press FMT as many times until the desired bank is indicated in the display. To store the six most powerful stations automatically with Travelstore:

Store: PressFMT; seek tuning starts.Recall: PressFMT as many times until the display shows “T”. Then briefly press one of the preset buttons1, 2, 3, 4, 5, or6.

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS

21

BRELEASE / CODE-LEDRelease panel- detachable face.

For extra anti-theftprotection, you should take the detachable face with you when leaving your car.

To remove it: Press RELEASE.

To re-installthe panel: Insert on the left side first with the cassette slot facing up and then press on the right until the panel locks in.

Code LED

May flash for additional theft protection when the car radio is switched off, provided this feature has been adjusted correspondingly via DSC (see DSC CODE-LED).

CRocker switch Seek tuning

Up

Down

/Up/down in short intervals (“AF” must be switched off)

/To scroll through the broadcasting network when “AF” is activated (e.g. NDR1 ... NDR4).

Extra functions:

In the DSC mode:

Select and programme DSC functions.

Coding: Enter code and confirm with.

Important notes

Precautions

Before starting to use your new car radio, please read the information on “Traffic safety” and “Anti-theftprotection” carefully.

Traffic safety

As the driver of a motor vehicle, it is your responsibility to pay attention to the traffic situation at all times. Never use your car radio in a way that could distract you.

Please keep in mind that you travel a distance of 14 m per second at a speed of only 50 km/h.

Should the traffic situation become particularly demanding, we advise you not to use the radio.

Always make sure that you are still able to hear any warning signals coming from outside of the vehicle, such as police or fire engine sirens, so that you can react accordingly.

Therefore, you should always select a moderate volume for playing your car radio while you are driving.

22

Installation/Connection

If you would like to install this equipment yourself or add any new components, please read the enclosed installation and connection instructions carefully.

Do not connect the loudspeaker outputs to ground!

Use only the accessory and replacement parts approved by Blaupunkt.

Anti-theftprotection

Release panel

This unit is equipped with a release panel (detachable face).

You can remove the control face at the push of a button.

For extra anti-theftprotection, we recommend you to take the detachable face with you when leaving your car.

Re-insertingthe release panel is child’s play. The set will be ready for use immediately; you will find all the previous settingsre-adjusted.

Detaching the release panel

Press RELEASE.

The unit will be switched off automatically. The control panel will be released in order for you to detach it.

Store it in a safe place, excluding possible damages.

Fitting the release panel

Insert the panel on the left side first with the cassette slot facing up and then

press on the right until it locks in.

The unit is now ready for use with the settings adjusted before removing the panel.

Security code

This car radio is supplied with inactive code protection. In order to switch the security coding system on, proceed as described in the following.

If the coding system is active while the power supply to the system is interrupted (e.g. theft, disconnection of the car battery), the set will be electronically blocked. In such a case it can only be made operable again by entering the correct code number given in the car radio passport.

Entry of a wrong code number

It should not be possible for a thief to find out the correct code number by trial and error. This is why the set will be blocked for a certain period of time after a wrong code number has been entered. The display will then show “CODE ERR”.

After the first three unsuccessful attempts, the system will lock for 8 seconds; after

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS

23

further attempts, the waiting time extends to

Now the security coding system is active.

one hour.

The display will briefly show “CODE” each

After 20 unsuccessful attempts, the display

time the set is turned on.

will show “SERVICE”. In this case you can no

 

longer re-startthe unit.

Re-startfollowing an interrup-

Notice:

tion of the power supply

(coding system is activated)

Keep your car radio passport with the code

• Turn on the radio.

number in a safe place in order to avoid

“unauthorised access” to your car radio.

The display shows “CODE”.

When the security code system is activated,

• Briefly press preset button 1; the dis-

the unique code must be entered each time

play shows “0000”.

the power to the unit was interrupted.

• Enter the code number given in the

The radio will function again as soon as you

Blaupunkt car radio passport:

have entered the correct code.

Example: The code number is 2521.

If you have lost your radio passport and

-

Press preset button 1 twice; the dis-

forgotten the code number, your radio can

 

play shows “2000”.

only be made operable again by one of our

 

-

Press preset button 2 five times; the

authorised service workshops (subject to

 

display shows “2500”.

payment).

 

-

Press preset button 3 twice; the dis-

 

Switching on security coding

 

play shows “2520”.

- Press preset button 4 once; the dis-

To activate the coding system:

 

play shows “2521”.

• Turn off the radio.

• To confirm the code number:

 

Press the upper part of the rocker

• Press preset buttons 1 and4 simulta-

switch .

neously and hold down while switching

 

the set on again.

If you have entered the correct code, the unit

 

The display briefly shows “CODE” and the will now be ready for use.

unit will switch on.

 

• Release preset buttons 1 and4.

 

If the display shows “CODE ERR”, you have entered a wrong code. Re-enterthe correct code after the waiting time (“CODE” will appear in the display).

If you switch off the set while it is blocked, the waiting time will start anew as soon as the radio is turned on again.

Switching off security coding

Turn off the radio.

Press preset buttons 1 and4 simultaneously and hold down while switching the set on again.

The display shows “CODE”.

Now enter the code number to be found in the car radio passport and confirm (see example under “Re-start ...”).

Security coding is now switched off.

Optical indication for extra security

To indicate that your unit is equipped with security coding, you may let an LED installed in the non-detachablepart of the front panel flash for extra security when the car is stationary.

For this, the following requirements must be fulfilled:

24

Permanent 12 V supply and the + ignition The Radio Data System offers you more lead must be connected correctly (as illustraconvenience when listening to FM radio stated in the installations instructions). tions.
„LED 1“ must be adjusted in the DSC mode. More and more radio stations have begun to Read “DSC programming - CODE-LED”. broadcast RDS information alongside their
programmes.

Radio operation with RDS (Radio Data System)

switching on the radio or recalling one of the stored frequencies, the unit is automatically searching for an alternative frequency.

DEUTSCH

 

“SEARCH” will disappear from the display

 

when the alternative frequency has been

 

found or after the frequency band has been

As soon as a programme has been identified,

run through completely.

the station name including a regional identi-

If the reception quality of the selected pro-

fier, if applicable, will appear in the display,

gramme becomes too bad:

for example, NDR1 NDS (regional program-

• Tune into another station.

me in Lower Saxony, Germany).

 

When RDS is activated, the station buttons

REG - regional programme

become programme buttons. You now know

 

exactly which programme you have tuned

Certain radio programmes are split up at

into, making it easy to find the desired station

times into regional programmes offering lo-

quickly.

cal information. The 1st programme broad-

But RDS offers you further advantages:

cast by NDR, for example, offers program-

 

mes with different contents in the northern

AF - Alternative frequency

states of Germany Schleswig-Holstein,Ham-

The AF (Alternative Frequency) function

burg and Lower Saxony at certain times of

the day. If you are listening to one program-

makes sure that the strongest frequency of

me and move to an area where another

the currently selected programme is always

linked regional programme becomes stron-

tuned in automatically.

ger, the unit will switch to that programme.

This function is activated when “AF” appears

If you wish to continue listening to the first

in the display.

programme,

In order to switch this function on or off,

• press the REG button.

• press the AF button briefly.

“REG ON” appears in the display.

 

ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL

While searching for the strongest reception

signal, the radio may switch to mute briefly. If you leave the service area of the regional If “SEARCH” appears in the display when programme tuned into, or if you would like to

PORTUGUÊS

25