Operating instructions
Augsburg CR 24
ENGLISH
1 |
2 |
3 |
4 |
5 |
6 |
11 |
10 |
9 |
8 |
7 |
PORTUGUES ESPAGÑOL SVENSKA NEDERLAND ITALIANO FRANÇAIS
3
Contents |
|
Short description ......................... |
14 |
Important information .................. |
16 |
What you need to know! ....................... |
16 |
Traffic safety ......................................... |
16 |
Installation/connection .......................... |
16 |
Anti-theft coding .......................... |
16 |
Wrong code number entered ................ |
16 |
Switching the code system on .............. |
17 |
Restart following interruption of power |
|
supply .................................................... |
17 |
Switching the code system off .............. |
17 |
Optical indication of theft protection ...... |
17 |
Radio operation ............................ |
18 |
Station search ....................................... |
18 |
Manual station search ........................... |
18 |
Adjusting the station search sensitivity . 18 |
|
Stereo - mono switch ............................ |
18 |
Changing the memory bank .................. |
18 |
Storing stations ..................................... |
18 |
Storing the strongest stations auto- |
|
matically with Travelstore ...................... |
19 |
Recalling stored stations ....................... |
19 |
Sampling stored stations briefly with |
|
Preset-Scan .......................................... |
18 |
Sampling stations briefly |
|
with Radio-Scan .................................... |
19 |
Traffic messages (ARI) ................ |
20 |
Switching the traffic messages (ARI) |
|
on and off .............................................. |
20 |
Warning beep ........................................ |
20 |
Switching the warning beep off ............. |
20 |
Automatic search start .......................... |
20 |
Adjusting the volume for traffic messages |
|
and warning beep ................................. |
21 |
Tape operation |
21 |
DEUTSCH |
|
|
|||
Inserting the tape .................................. |
21 |
|
|
Ejecting the cassette ............................. |
21 |
ENGLISH |
|
Fast tape run |
21 |
||
|
|||
Autoreverse function ............................. |
22 |
|
|
Care of your audio equipment ............... |
22 |
|
.......................................Appendix |
22 |
|
FRANÇAIS |
Technical data |
22 |
|
|
|
|
||
|
|
|
ITALIANO |
|
|
|
NEDERLAND |
|
|
|
SVENSKA |
|
|
|
ESPAGÑOL |
|
|
|
PORTUGUES |
|
13 |
|
|
|
|
|
Short description
1 Amplifier
On Off
Volume
Scan: Press for 1 second.
Tone Balance
When “Cod” lights up in the display, read chapter “Anti-theft coding” first.
Balance
To adjust the volume of the left and right channel.
SCAN
Press for approximately 1 second to sample all stations to be received.
2 Rocker switch
|
Station search |
|
up |
down in |
up in |
short intervals |
short intervals |
|
down |
Extra function:
Coding Confirm with after having entered the code.
3Eject cassette tape
Press
4Cassette tape slot
Insert cassette (side A or 1 facing up, the open side facing to the right).
5 Rapid tape run/Autoreverse
Switch-over to the other track
Press simultaneously
Fast |
|
|
Fast |
|
|
||
rewind; |
|
|
forward; |
To stop: press FF |
|
To stop: press FR |
Side A or 1 Side B or 2
Track indication
6 Display
Wave band
Frequency
Memory bank
Preset button
ARI priority
ARI
station code Stereo
Sensitivity (station search)
14