Blaupunkt ALBERTVILLE DJ User Manual

Size:
206.94 Kb
Download

Radio / Cassette

Albertville RCM 149

Zermatt RCM 149

Aspen DJ

Operating instructions

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

Display

The display consists of three fields and changes according to the operating mode and function.

Display field 1:

Radio mode

Memory banks and wavebands

Brief indication of preset station (e.g. P1)

Cassette mode

CAS - cassette inserted

Changer mode

Current track

Audio

Numeric and graphic representation of the volume and audio settings.

DSC

Permanent display for DSC programming. Graphic representation of the adjusted volume level.

Display field 2:

Radio mode

Radio frequency or station name PTY programme type

Cassette mode

TAPE1/TAPE2 - side of tape being played. Displays active function.

Changer mode

CD number being played by changer. CD time (elapsed time)

Brief indication of functional changes

DSC

Serves as display and entry field during DSC programming

Clock display

Miscellaneous

Indicates new source (e.g. when changing from radio to cassette)

Display field 3:

Displays active functions.

- Stereo

- Cassette inserted

- CD changer connected

LD - Loudness

Radio mode

AF

- RDS alternative frequency

PTY

- RDS programme type

TA

- Priority for traffic information

TP

- Traffic programme station

lo

- Seek tuning sensitivity

CD changer mode

RPT - Repeat function

MIX - Titles played at random

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS

23

Contents

 

Display ..........................................

23

Quick reference ............................

25

Important notes ............................

28

What you need to know ........................

28

Traffic safety .........................................

28

Installation .............................................

28

Warning note ........................................

28

Clock .............................................

29

Setting the clock ...................................

29

Release panel .......................................

29

Theft protection .....................................

29

Fixing the release panel .......................

30

Selecting the audio mode ...........

30

Radio operation with RDS ...........

31

AF - Alternative frequency ....................

31

REG - regional programme ..................

31

Selecting a waveband ..........................

31

Station tuning ........................................

31

Automatic seek tuning / ..............

31

Manual tuning with << >> ..................

32

Scrolling through the broadcasting

 

networks (FM only) ...............................

32

Switching between the memory banks

 

(FM) ......................................................

32

Storing stations .....................................

32

Automatically storing the strongest

 

stations with Travelstore .......................

32

Recalling stored stations ......................

33

Scanning stations with Radio Scan ......

33

Changing the scan time ........................

33

Selecting the automatic tuning

 

sensitivity ..............................................

33

PTY - Programme Type ........................

33

Programme types ..............................

33

Switching PTY ON/OFF ....................

34

Checking the programme type of the

 

station ................................................

34

Displaying the selected programme

 

type ....................................................

34

Selecting a programme type .............

34

Storing programme types ..................

35

Scanning stations with PTY SCAN ...

35

PTY priority ........................................

35

Traffic programme station

 

reception with RDS-EON .............

36

Traffic announcement priority on/off ....

36

Warning beep .......................................

36

Switching the warning beep off .........

36

Automatic seek tuning start

 

(Cassette and CD changer operation) . 36

Adjusting the volume for traffic

 

announcements and the warning beep ..

37

Cassette deck operation .............

37

Cassette playback ................................

37

Cassette eject .......................................

37

Fast winding ..........................................

37

Reversing the tape ...............................

37

Traffic information during

 

cassette playback .................................

37

CD changer operation ..................

38

Switching to the CD changer mode ......

38

Inserting a CD .......................................

38

Ejecting a CD ........................................

38

CD playback .........................................

38

Selecting a CD ......................................

38

Selecting a title .....................................

39

SCAN ....................................................

39

RPT .......................................................

39

MIX .......................................................

39

DSC programming .......................

40

Overview of the DSC factory

 

settings ..................................................

41

Appendix .......................................

42

Specifications ........................................

42

Installation instructions ............

163

24

Quick reference

1REL

To release the detachable panel (theft protection).

Press this knob and remove the release panel.

2ON - Power up/down

Press this button to turn the equipment on. It will play at the preset volume. If you press this button briefly during radio reception, the volume will turn down instantly (MUTE).

This function is cancelled by pressing the ON button again. You can programme the mute volume (refer to “DSC programming”).

Press the button for about 2 seconds to turn the unit off.

Switching on/off via the ignition:

If the set has been connected correspondingly, it can also be turned on and off with the vehicle ignition.

Press the ON button to keep on operating the set when the ignition is switched off.

The set will switch on. To avoid that the battery goes flat, the system will be turned off automatically after one hour of playback.

3Volume knob

Turn the knob to set the volume.

4 Eject

Press this button to eject the cassette.

5Cassette slot

Insert the tape into the slot with the open side showing to the right. The tape will be played in the direction previously selected.

6Display

Displays all settings, operating modes and functions.

7FR Fast Rewind

To fast rewind the tape.

8FF Fast Forward

To fast forward the tape.

7+ 8 Reversing the tape (PROG)

Press both buttons simultaneously.

9 Rocker switch

Radio mode

/ Seek tuning

Up

Down

<</>> Up/down in short intervals

(on FM only if „AF“ is off)

For FM only:

<</>> Scrolling through the broadcasting networks, if AF is on. Example: NDR 1, 2, 4, N-Joy,FFN ...

Changer mode

Optional:

Albertville RCM 149,

Zermatt RCM 149

Included:

Aspen DJ

Select CD

Up

Down

ENGLISH DEUTSCH

FRAN AISÇ

ITALIANO NEDERLANDS SVENSKA

ESPA OLÑ

PORTUGU SÊ

25

Select title

Up: press briefly

CUE - fast forward (audible): hold button down.

Down: press two or more times briefly

Repeat title: press briefly.

REVIEW - fast reverse (audible): hold button down.

Extra function of rocker switch:

For additional settings use

AUD F

DSC-MODEE

PTY <

Requirement: The respective function is activated.

:SRC/SC

(SRC = audiosource,SC =scan) Press button briefly to select the operating mode (tuner, cassette, changer). The active mode appears in the display.

Press SRC/SC longer to select the SCAN function (samples radio stations and titles).

Use DSC programming to set the scan time.

Radio mode

Press SRC/SC longer.

The radio will scan all receivable FM stations. “SCAN” and the station name appear on the display one after another.

PTY Scan

PTY Scan can be started if PTY is on (“PTY” will be displayed).

The radio will scan all stations broadcasting the selected programme type.

Changer mode

Press SRC/SC longer. “SCAN” will be displayed.

To stop CD Scan: Press SRC/SC again.

;AF·TA

AlternativeFrequency in RDS mode:TA (TrafficAnnouncement = priority for traffic programs)

If “AF” is displayed, the radio will automatically search for a radio frequency offering the same programme in a better quality (using RDS).

TA on/off:

Press AF·TA briefly: “TA” will be displayed, priority for traffic programs activated.

Press AF·TA briefly: TA off.

“TP” will be displayed when a traffic programme is played.

AF on/off:

Press AF·TA longer: a beep will be emitted; “AF” appears.

Press AF·TA longer: a beep will be emitted; “AF” disappears.

<PTY (ProgrammeType)

You can select among various programme types. Using the rocker switch << >> it is possible to recall all PTY programme types, if PTY is activated (“PTY” lights up in the display).

=BA/TS

Switches between the wavebands/ memory banks FM1, FM2, FMT (Travelstore), MW and LW (Zermatt RCM 149 without MW, LW).

Extra function: Travelstore

To store the six most powerful radio stations in theTravelstore bank: PressBA/TS until a beep sounds and“T-STORE”appears.

26

>...C - Preset buttons 1 to 6

Radio mode

You can store six stations in each memory bank (1, 2, and “T”).

On MW and LW you can store six stations each (except for Zermatt RCM 149).

Store station - hold down a preset button in radio mode until a beep is emitted.

Recall station - select a waveband and also the memory bank on FM; press the relevant preset button briefly. The selected preset button will briefly appear in display field 1 (e.g. P1).

Changer mode

3/- Pause

Interrupts CD play. “PAUSE” appears. Press button again to restart CD play.

4/RPT

Repeat title: press 4/RPT.“REPEAT-T”appears briefly. The title will be repeated until4/RPT is pressed again.

Repeat CD: select “REPEAT-D”.SwitchREPEAT-Don:

Hold 4/RPT down until a beep is emitted.

5/MIX

“MIX CD” plays the titles of one CD in random order.

“MIX ALL” plays the titles of all CDs of one changer magazine in random order.

To turn MIX on/off: Press 5/MIX briefly.

The current setting is briefly indicated in the display: “MIX-CD”.

Switch MIX-ALLon:

Hold 5/MIX down until a beep is emitted.

DDIS - clock display

Radio mode

Press this button briefly and the time will be displayed for a while.

Changer mode

Press this button to switch the display between CD number and CD time indication.

Cassette mode

Press this button to switch the display between the cassette direction and clock indication.

EDSC DirectSoftwareControl

Adjusts programmable basic settings. Refer to “DSC programming”.

FAUD

Default settings for treble and bass

You can store different settings for the FM, MW, LW, cassette and CD mode

(Zermatt RCM 149 without MW, LW).

Setting the tone:

Select the audio mode. Press AUD once and set the tone using the rocker switch.

Treble:

Treble +

Treble –

Bass:

Bass –

Bass +

Press AUD twice and set the fader using the rocker switch.

Fader front

Fader rear

Balance left

Balance right

The selected values will appear in the display. The last setting is stored automatically.

ENGLISH DEUTSCH

FRAN AISÇ

ITALIANO NEDERLANDS SVENSKA

ESPA OLÑ

PORTUGU SÊ

27

Switching AUD off

Press button briefly.

If you do not change the tone within 8 sec., the AUD mode will quit automatically.

Extra function: LD

Loudness boosts the bass frequency at low volume.

Press AUD longer than 2 seconds to change the Loudness setting. “LD” will appear.

Important notes

What you need to know

Before using your new car radio, please read through the following information carefully.

Traffic safety

As the driver of a motor vehicle, it is your responsibility to pay attention to the traffic situation at all times.

Never use your car radio in a way that could distract you.

Please keep in mind that you travel a distance of 14 m per second at a speed of only 50 km/h. Should the traffic situation become particularly demanding, we advise you not to use the radio.

Always make sure that you are still able to hear any warning signals coming from outside the vehicle, such as police or fire engine sirens, so that you can react accordingly.

Consequently, you should always select a moderate volume for playing your car radio while you are driving.

Installation

If you would like to install your new car stereo yourself or add other audio components to existing ones, then please read the enclosed instructions on installation and connection carefully.

In order to ensure that the set operates properly the positive power supply line must be connected via the ignition and the permanent +12 V lead.

Do not ground the loudspeaker outputs!

Warning note

Danger of damaging the automatic power antenna in a car wash

Before you drive into a car wash

switch the radio off by pressing the ON button.

The power antenna will retract, if it doesn’t, press ON again.

Do not drive into the car wash unless the power antenna has retracted!

Guarantee

The scope of the guarantee is determined by the laws in the country where the unit was purchased.

Regardless of the legal guarantee regulations, Blaupunkt affords a 12-monthguarantee. Your cash register receipt is a valid guarantee coupon.

If you have any questions about the guarantee, please contact your dealer. He will be happy to assist you, repair your equipment or forward it to an authorised Blaupunkt repair shop. In addition, our employees are there to help you on our service hotline.

You will find the telephone and fax numbers on the last page of this manual.

International telephone information

Have you got any questions on the operation of this equipment or do you require more information?

Give us a call!

You will find the international telephone and fax numbers on the last page of this manual.

28

Clock

This car radio is equipped with a built-inclock.

Display priority:

To switch the display priority, press the button until you hear a beep. Press as many times until the desired display mode is active (not during radio reception).

Radio mode

Press the button briefly to display the clock.

Cassette mode

Press this button to switch the display between the cassette direction and clock indication.

Changer mode

Press the button briefly to switch the display between the CD number, playback time and clock indication.

Setting the clock

Press DSC briefly.

Press /to selection the “CLOCKSET” function.

Press << >> to set the hours or minutes. The adjustable option will flash in the display.

Press /to adjust the flashing value.

After you have set the clock, press DSC briefly to store the new setting.

Release panel

Theft protection

This unit is equipped with a detachable control panel. A car radio without control panel is worthless for thieves.

Protect your car radio and detach the control panel when you leave your car. It is very easy to attach and detach the release panel thanks to its specific design.

Note:

Do not pull the release panel straight out from the chassis, but detach it as illustrated below. Be sure not to drop the panel.

Do not expose the release panel to direct sunlight or other heat sources.

Do not leave it in a humid place.

Detaching the release panel

Press the REL button to release the control panel. Then pull it off gently as illustrated.

If the set was still in operation, it will turn off now. All current settings remain stored. If a cassette is inserted, it will be kept in the set. The radio will turn on automatically when you attach the release panel again.

Attaching the release panel

Slide the panel (B) from the left to the guide of the chassis (A). Gently push the left side of the panel against the front of the chassis until it snaps into place.

ENGLISH DEUTSCH

FRAN AISÇ

ITALIANO NEDERLANDS SVENSKA

ESPA OLÑ

PORTUGU SÊ

29

Fixing the release panel

If you wish to fix the release panel permanently to the chassis, screw down the enclosed bolt at the left hand side of the chassis into the hole (C), see Fig.

C

Selecting the audio mode

Use the SRC/SC (source) button to select between radio, cassette and CD mode.

The CD mode is not available unless a CD changer is connected.

To select the operating mode:

Press SRC/SC.

30