Blaupunkt 400 BT User Manual

Size:
1.02 Mb
Download

www.blaupunkt.com

Radio CD MP3 WMA

Toronto 400 BT

7 649 035 110 / 7 649 036 010

www.blaupunkt.com

Bedienungsund Einbauanleitung Operating and installation instructions Mode d’emploi et de montage Istruzioni d’uso e di installazione

Gebruiksaanwijzing en inbouwhandleiding Bruksoch monteringsanvisning Instrucciones de manejo e instalación Instruções de serviço e de montagem Betjeningsog monteringsvejledning Instrukcja obsługi i montażowa

Návod k obsluze a k montáži Käyttöja asennusohje

Kezelési és beszerelési útmutató Инструкция по эксплуатации и установке Οδηγίες τοποθέτησης και χρήσης

Controls

1

2

3

4

5

6

7

8

9

10

ENGLISH

MIC

18

17

16

15

14

13

12

11

1button

Unlock the detachable control panel

2button

In the menu: Call up menu itemRadio mode: Select memory bank

MP3/WMA/C‘n‘C/CD changer mode: Change to next folder / CD

3On/Off button

Short press: Switch on car sound system

In operation: Mute car sound system (Mute)Long press: Switch off car sound system

4 Volume control

5button

In the menu: Change settingsRadio mode: Adjust the stations

Other operating modes: Track selection

6SRC button

Selecting an audio source

7 CD tray

8 Display

9 USB port

:button (Eject) Eject a CD

; Front AUX-INsocket < Keys1 - 5

=DIS/ESC button

In the menu: Exit menu

In operation: Switch display

>button

In the menu: Change settingsRadio mode: Adjust the stations

Other operating modes: Track selection

?MENU•OK button

Short press: Call up menu, confirm settingsLong press: Start scan function

@button

In the menu: Call up menu itemRadio mode: Select memory bank

MP3/WMA/C‘n‘C/CD changer mode: Change to previous folder / CD

Abutton

Ending/rejecting a phone call

Bbutton

Answering a call, speed dial

27

Contents

Safety notes .............................................

29

Symbols used ........................................

29

Road safety ...........................................

29

General safety notes ...............................

29

Declaration of conformity ........................

29

Cleaning notes..........................................

30

Disposal notes ..........................................

30

Scope of delivery ......................................

30

Optional equipment

 

(not part of the scope of delivery) .............

30

Placing the device in operation ..................

31

Attaching/detaching the control panel .......

31

Setting the tuner region...........................

31

Switching on/off ....................................

31

Volume .................................................

32

Switching demo mode on/off ...................

32

Displaying version numbers .....................

32

Traffic information....................................

32

Radio mode ..............................................

33

RDS .....................................................

33

Changing to radio mode ..........................

33

Selecting the memory bank .....................

33

Tuning into a station................................

33

Storing stations/Calling stored stations......

34

Scanning stations ...................................

34

Storing stations automatically (Travelstore) ...

34

PTY ......................................................

34

Configuring the display............................

35

CD/MP3/WMA/C‘n‘C/CD changer mode .....

35

Basic information ...................................

35

Changing to CD/MP3/WMA/C‘n‘C/

 

CD changer mode...................................

36

Inserting a CD ........................................

37

Ejecting a CD .........................................

37

Connecting/removing a USB data carrier ...

37

Selecting tracks .....................................

37

Select a folder/CD (only in MP3/WMA/

 

C‘n‘C or CD changer mode) ......................

37

Fast searching........................................

38

Interrupting playback ..............................

38

Playlist mode (only in MP3/WMA mode) ....

38

Scanning all tracks..................................

38

Playing tracks in random order .................

38

Repeatedly playing individual tracks,

 

CDs or directories ..................................

39

Configuring the display............................

39

Bluetooth® ...............................................

39

Bluetooth® menu ....................................

40

Registering and connecting a device..........

40

Telephone functions ...............................

41

Bluetooth® streaming mode .....................

42

Additional functions in the Bluetooth®

 

menu....................................................

43

External audio sources ..............................

44

Front AUX-INsocket ................................

44

Rear AUX input.......................................

44

Sound settings .........................................

45

Calling and exiting the audio menu ............

45

Performing settings in the audio menu.......

45

Calling and exiting the enhanced audio

 

menu....................................................

46

Performing settings in the enhanced

 

audio menu ...........................................

46

User settings ............................................

47

Calling and exiting the user menu..............

47

Performing settings in the user menu ........

47

Factory settings........................................

50

Useful information....................................

51

Warranty...............................................

51

Service .................................................

51

Technical data ..........................................

51

Installation instructions ..........................

381

28

Safety notes

Safety notes

The car sound system was manufactured according to the state of the art and established safety guidelines. Even so, dangers may occur if you do not observe the safety notes in these instructions.

These instructions contain important information to easily and safely install and operate the car sound system.

Remove or attach the control panel only while the vehicle is standing an.

Always listen at a moderate volume to protect your hearing and to be able to hear acoustic warning signals (e.g. police sirens). During mute phases (e.g. when changing the audio source), changing the volume is not audible. Do not increase the volume during this mute phase.

Read these instructions carefully and completely before using the car sound system.

Keep the instructions at a location so that they are always accessible to all users.

Always pass on the car sound system to third parties together with these instructions.

In addition, observe the instructions of the devices used in conjunction with this car sound system.

Symbols used

These instructions employ the following symbols:

DANGER!

Warns about injuries

CAUTION!

Warns about damaging the CD drive

The CE mark confirms the compliance with EU directives.

Identifies a sequencing step

• Identifies a listing

General safety notes

Observe the following notes to protect yourself against injuries:

Do not modify or open the device. The device contains a Class 1 laser that can cause injuries to your eyes.

Do not increase the volume during mute phases, e.g. when changing the audio source. Changing the volume is not audible during a mute phase.

Use as directed

This car sound system is intended for installation and operation in a vehicle with 12 V vehicle system voltage and must be installed in a DIN slot. Observe the performance limits in the technical data. Repairs and installation, if necessary, should be performed by a specialist.

Installation instructions

You may only install the car sound system yourself if you are experienced in installing car sound systems and are very familiar with the electrical system of the vehicle. For this purpose, observe the installation instructions at the end of these instructions.

Road safety

Observe the following notes about road safety:

Use your device in such a way that you can always safely control your vehicle. In case of doubt, stop at a suitable location and operate your device while the vehicle is standing.

Declaration of conformity

The Blaupunkt GmbH declares that the car sound system Toronto 400 BT complies with the basic requirements and the other relevant regulations of the directive 1999/5/EG.

ENGLISH

29

Cleaning notes | Disposal notes | Scope of delivery

Cleaning notes

Solvents, cleaning and scouring agents as well as dashboard spray and plastics care product may contain ingredients that will damage the surface of the car sound system.

Use only a dry or slightly moistened cloth for cleaning the car sound system.

If necessary, clean the contacts of the control panel regularly using a soft cloth moistened with cleaning alcohol.

Disposal notes

Do not dispose of your old unit in the household trash!

Use the return and collection systems available to dispose of the old device.

Scope of delivery

The scope of delivery includes:

1Car sound system

1Operating/installation instructions

1Case for the control panel

1Support frame

1Set of small parts

2 Disassembly tools

1 USB connecting cable

Extended scope of delivery (for 7 649 036 010 only):

1Connecting cable chamber A (power supply)

1Connecting cable chamber B (loudspeaker)

1Connecting cable chamber C1 (Line-Out)

1Antenna connection adapter

1Handheld remote control

2 Batteries (type AAA)

Note:

We recommend the use of original Blaupunkt accessories (www.blaupunkt.com).

Optional equipment

(not part of the scope of delivery)

Contact your Blaupunkt specialised dealer or visit us on the Internet under www.blaupunkt.com for information about optional equipment, such as:

The steering wheel or handheld remote control from Blaupunkt for safe and convenient operation of the basic functions (switching on/off not possible with the remote control)

The C‘n‘C-readyinterfaces from Blaupunkt (C‘n‘C = Command and Control) for connecting additional data carriers and devices (e.g. via the iPod®/USB interface)

Blaupunkt CD changer

Blaupunkt or Velocity amplifier

30

Placing the device in operation

Placing the device in operation

Attaching/detaching the control panel

The car sound system is equipped with a detachable control panel (release panel) to protect your equipment against theft. In the delivery state, the control panel is in the supplied case. To start operating the radio after installation, you must first attach the control panel (see the section "Attaching the control panel" in this chapter).

Always take the control panel with you when leaving the vehicle. The car sound system is worthless to a thief without this control panel.

Caution

Damage to the control panel

Never drop the control panel.

Transport the control panel so that it is protected against impacts and the contacts cannot become dirty.

Do not expose the control panel to direct sunlight or another heat source.

Avoid direct skin contact with the control panel’s electrical contacts.

Attaching the control panel

Push the control panel into the bracket at the right edge of the device.

Push the control panel carefully into the left bracket until it clicks into place.

Removing the control panel

Press the button 1to unlock the control panel.

The left side of the control panel detaches from the device and is secured by a latch against falling out.

Grasp the control panel at the left side and pull it beyond the resistance of the latch and straight out of the bracket.

Note:

The car sound system automatically switches off as soon as the control panel is removed.

Setting the tuner region

This car sound system is designed for operation in

 

different regions with different frequency ranges

 

and station technologies. It is factory set to the

 

tuner region "EUROPE". Other available tuner

 

regions include "USA", "THAI" (Thailand) and

ENGLISH

have to set a suitable tuner region:

"S AMERICA" (South America). If you operate the

 

car sound system outside of Europe, you may first

 

Switch off the car sound system if it is not already turned off.

Press and hold the buttons MENU•OK ? and4 <at the same time and press the On/ Off button 3.

The car sound system switches on. The currently set tuner region appears on the display.

Press the button @ /2 repeatedly until the desired tuner region is displayed.

Press the MENU•OK button ?.

Switching on/off

Switching on/off with the On/Off button

For switch-on,press the On/Off button 3. The car sound system switches on.

To switch off the device, press and hold down the On/Off button 3for longer than 2 seconds.

The car sound system switches off.

Note:

If you switch on the car sound system while the vehicle ignition is switched off, it automatically switches off after 1 hour to preserve the vehicle battery.

Switching on/off via vehicle ignition

The car sound system will switch off/on simultaneously with the ignition if the device is correctly connected to the vehicle’s ignition as shown in the installation instructions and you did not switch the device off by pressing the On/Off button 3.

31

Placing the device in operation | Traffic information
Volume
Adjusting the volume
You can adjust the volume in steps from 0 (off) to 50 (maximum).
Turn the volume control 4 to change the volume.
Note:
If a telephone or navigation system is connected with the car sound system as described in the installation instructions, the car sound system is muted in case of a telephone call or navigation announcement so that you can hear the playback of the telephone or navigation system undisturbed. While it is muted, the display shows "TELEPHONE".
Muting the car sound system (Mute)
You can quickly reduce the volume to a preset level.
Briefly press the On/Off button 3 to mute the car sound system or to reactivate the previous volume.
While it is switched low, the display shows "MUTE".
To adjust the mute volume, please read the section "Performing settings in the user menu", "Mute LVL" menu item in the chapter "User settings".
Switching demo mode on/off

The demo mode shows the functions of the car sound system as scrolling text on the display. You can turn the demo mode on or off:

Switch off the car sound system if it is not already turned off.

Press and hold the buttons MENU•OK ? and2 <at the same time and press the On/ Off button 3.

The car sound system switches on. The display briefly shows "DEMO MODE" if you switched on the demo mode. By pressing any button, the demo mode is interrupted and you can operate the device.

32

Displaying version numbers

You can display the version numbers of the different device components.

Switch off the car sound system if it is not already turned off.

Press and hold the buttons MENU•OK ? and1 <at the same time and press the On/ Off button 3.

The car sound system switches on. The display shows the version number of the first component. The first character identifies the component: P = CPU, E = EPROM, A = Accordo, B = Bluetooth®.

Press the button 5/>to display the version number of the other components.

Press the MENU•OK button ?to return to the previously played audio source.

Traffic information

In the tuner region "EUROPE", an FM station can identify traffic reports by means of an RDS signal. If the priority for traffic announcements is switched on, a traffic announcement is automatically switched through, even if the car sound system is currently not in radio mode or if a station of the wavebands MW or LW is set.

If priority is switched on, the display shows the traffic jam symbol (). "TRAFFIC" is displayed during aswitched-throughtraffic announcement.

To switch the priority on and off, please read the section "Performing settings in the user menu", "TRAF" menu item in the chapter "User settings".

Notes:

The volume is increased for the duration of the switched-throughtraffic announcement. You can adjust the minimum volume for traffic announcements (see the ch. "User settings", section "Performing settings in the user menu", "TA VOLUME" menu item).

Traffic information | Radio mode

To cancel a switched-thoughtraffic an-

nouncement, press the DIS/ESC button

=.

Radio mode

RDS

Many FM stations broadcast an RDS (Radio Data System) signal in addition to their programme in the tuner region "EUROPE" that allows the following additional functions:

The station name is shown on the display.

The car sound system recognises traffic announcements and news broadcasts and can automatically switch them through in any operating mode (e.g. in CD mode).

Selecting the memory bank

The following memory banks are available in the different tuner regions:

Region

Memory banks

EUROPE

FM1, FM2, FMT, MW, LW

USA

FM1, FM2, FMT, AM, AMT

THAI

FM1, FM2, FMT, AM

S AMERICA

FM1, FM2, FMT, AM, AMT

Press the button @ /2 repeatedly until the desired memory bank is displayed.

Note:

Up to 5 stations can be stored in each memory bank.

Alternate frequency: If RDS is activated, the car sound system automatically selects the best receivable frequency for the station that is currently set.

Regional (REG): At certain times, some radio stations divide their programme into regional programmes providing different content. If the REG function is activated, the car sound system changes only to those alternate frequencies on which the same regional programme is being broadcast.

To switch the RDS or REG function on or off, please read the section "Performing settings in the user menu" in the chapter "User settings" (menu items "RDS", "REG").

Changing to radio mode

Press the SRC button 6 repeatedly until "TUNER" is displayed:

Tuning into a station

There are various ways of tuning into a station:

Tuning into stations manually

Briefly press the button 5/> once or several times to change the frequency in increments, or long to quickly change the frequency.

Notes:

For the tuner region "EUROPE": In the FM waveband, the next station of the broadcasting network is automatically tuned into if the RDS function is switched on.

For the tuner regions "EUROPE", "USA" and "S AMERICA": In the FM waveband, the current selected programme type is displayed and can be changed if the PTY function is activated (see the ch. "PTY").

The current memory bank appears once as scrolling text on the display.

Starting station seek tuning

Press the button 5/> for approx. 2 seconds to start station seek tuning.

The radio tunes into the next receivable station.

ENGLISH

33

Scanning stations
The scan function is used to scan every receivable station of the current waveband.
Press the MENU•OK button ? for approx. 2 seconds to start the scan, or long to continue playing the currently set station.
During the scan, the display alternately displays "SCAN" and the current frequency as well as memory bank or station name.
Note:
For radio mode, you can adjust the scan time for each station (see the ch. "User settings", section "Performing settings in the user menu", "SCAN TIME" menu item).
34

Radio mode

Notes:

For the tuner region "EUROPE": In the FM waveband, only traffic information stations are tuned into if the priority for traffic information () is switched on.

For the tuner regions "EUROPE", "USA" and "S AMERICA": In the FM waveband, the next station with the currently selected programme type is tuned into if the PTY function is activated (see the ch. "PTY").

The sensitivity of seek tuning can be adjusted (see the chapter "User settings", section "Performing settings in the user menu", menu item "SENS").

Storing stations/Calling stored stations

Select the desired memory bank.

If necessary, set the desired station.

Press the station button 1 - 5 <for approx. 2 seconds to store the current station under the button.

- or -

Briefly press the station button 1 - 5 < to call up the stored station.

Storing stations automatically (Travelstore)

With Travelstore, you can automatically search for and store the 5 FM stations offering the strongest reception in the region in one memory bank, Any previously stored stations in this memory bank are deleted in the process.

In the tuner regions "EUROPE" and "THAI", you can store 5 FM stations in the FMT memory bank with Travelstore. In the tuner regions "USA" and "S AMERICA", you can also store 5 AM stations in the AMT memory bank.

Select a memory bank of the desired waveband, e.g. FM1 or AM.

Press the button @ /2 for approx. 2 seconds.

The tuner starts the automatic station seek tuning; the display shows "FM TSTORE" or "AM TSTORE". After the storing is completed, the radio plays the station at memory location 1 of the FMT or AMT level.

Note:

For the tuner region "EUROPE": If the priority for traffic information is switched on (), only traffic information stations are stored.

PTY

In the tuner regions "EUROPE", "USA" and "S AMERICA", an FM station can transmit its current programme type, e.g. CULTURE, POP, JAZZ, ROCK, SPORT or SCIENCE. Hence, the PTY function allows a targeted search for broadcasts of a certain programme type, e.g. for rock or sports broadcasts. Note that PTY is not supported by all stations.

Radio mode | CD/MP3/WMA/C‘n‘C/CD changer mode

Note:

To use the PTY function, you must activate it separately in the menu (see the ch. "User settings", section "Performing settings in the user menu", "PTY" menu item).

Selecting a programme type Note:

In the tuner region "EUROPE", you can adjust the language in which the programme types are displayed (see the ch. "User settings", section "Performing settings in the user menu", "PTY LANG" menu item).

Briefly press the button 5/>.

The currently selected programme type is briefly displayed, and you can select a different programme type.

If necessary, press the button 5/> repeatedly until the desired programme type is selected.

Searching for stations

Press the button 5/> for approx. 2 seconds.

As soon as the seek tuning starts, the display briefly shows "SEARCH". Afterwards, the current programme type is displayed.

As soon as a station is found, "PTY FOUND" is briefly shown. As long as the programme type of the adjusted station corresponds to the currently selected programme type, the display alternately shows the programme type and the station name or frequency.

Notes:

If no station with the selected programme type is found, "NO PTY" is briefly displayed and a beep sounds. The radio will then retune to the station that it played last.

If the tuned radio station or another station on the broadcasting network broadcasts your selected programme type at a later point in time, the car sound system will automatically switch from the currently tuned station or from the current audio source (e.g. CD) to the station whose programme type matches the one you selected. Note that this function is not supported by all stations.

Configuring the display

Press the DIS/ESC button =to change between these two displays:

Display

Meaning

ABCDEF

Station name

or

or

FM1 102.90

memory bank/frequency

FM1 11:32

Memory bank/time

CD/MP3/WMA/C‘n‘C/

CD changer mode

Basic information

CD/MP3/WMA mode

This car sound system can be used to play audio CDs (CDDA) and CD-R/RWswith audio, MP3 or WMA files as well as MP3 or WMA files on USB data carriers.

Risk of severe damage to the CD drive!

Noncircular contoured CDs (shape CDs) and CDs with a diameter of 8 cm (mini CDs) must not be used.

We accept no responsibility for any damage to the CD drive that may occur as a result of the use of unsuitable CDs.

Notes:

To ensure proper functioning, use only CDs with the Compact-Disclogo.

ENGLISH

35