Black Box 16 port User Manual
Size:
3.11 Mb
Download

show server

user levels: This command displays the base configuration of the unit, for example:admin,

normal

Syntax

Fields which are unconfigured will not appear in the list on your screen.

show server

Menu

server configuration

equivalent

 

See also

set server, show hardware

Black Box Console Server user guide

196

show slip line

user levels:

Use this command to show the SLIP configuration of a line. Admin users can show all

admin,

lines; users with normal level privileges can only display the configuration of their own

normal

line.

 

For example:

syntax

show slip line line_number

 

where

 

 

 

:line_number may also be specified as * for all lines, or . for the currentin-useline.

 

parameters are any from the list below:

 

 

 

 

 

parameter syntax

parameter name

 

 

 

 

 

lipaddr

local ip address

 

ripaddr

remote ip address

 

subnet

subnet mask

 

mtu

maximum transmission unit

 

priority

interactive priority

 

transmit_parameters

transmit parameters

 

icmp_suppress

suppress icmp

 

vj_comp

VJ compression

 

 

 

 

The meanings and values of these parameters are explained in Introduction to SLIP and

Menu

PPP connections on page 74.

Line Configuration - Line Settings

equivalent

 

 

 

See also

set slip line

 

 

Black Box Console Server user guide

197

show snmp

user levels: This command shows the configuration of the unit for SNMP support; for example:admin,

normal

Syntax

show snmp

Menu

network configuration - snmp

equivalent

 

See also

add community, add trap, set contact, set location

Black Box Console Server user guide

198

show telnet

user levels: admin, normal

Use this command to show telnet parameters on a line. Note that telnet parameters shown here apply only to line service types of:

Direct telnet

Silent telnet

The command also shows telnet parameters entered using the command set telnet.

Syntax

show telnet line line_number

 

Where:

 

 

line_number

is the serial line number connected

Menu

not available in the text menus

equivalent

 

 

See also

set telnet

 

show time

user levels:

This command enables you to show the time as measured by the real-timeclock in

admin,

the unit; e.g.

normal

time11:04:32

Syntax

show time

Menu

Main Menu - hardware

equivalent

 

See also

set date, set time, show date, show hardware

Black Box Console Server user guide

199