Black Box 16 port User Manual
Size:
3.11 Mb
Download

See also

add user, netload, show user, delete user, show telnet

show ARP

 

This command is used to display the current ARP table. This is useful for diagnostic and

 

debugging purposes.

Syntax

This parameter is only accessible from the unit's CLI.

show arp

See also

delete ARP

show date

user levels: admin, normal Syntax

Menu equivalent See also

This command enables you to show the date in the unit; e.g.

date2/2/1999

show date

Main Menu - hardware

set date, set time, show time, show hardware

Black Box Console Server user guide

185

show gateways

user levels: Use this command to list the gateways you have defined. The list will be displayed inadmin, the following format:

normal

 

If you have not entered gateway information your command will be ignored; you will

Syntax

be presented with the unit prompt once more.

show gateways

Menu

Network Configuration - Gateways - Change Gateway

equivalent

 

See also

add gateway, delete gateway, set gateway

show hardware

user level: This command displays the hardware configuration of your unit. An example displayadmin, is:

normal

Syntax

show hardware

Menu

Main Menu - Hardware

equivalent

 

See also

set date, set time, show line

Black Box Console Server user guide

186

show hosts

user levels: Use this command to list the contents of the host table:admin,

normal

Syntax

show hosts

Menu

Network Configuration - Host Table - Change Host

equivalent

 

See also

add host, delete host, set host

show interfaces

This command will show all lines with active SLIP or PPP links. It is useful for monitoring the status of dial-uplines. This parameter is only accessible from the unit's CLI.

Syntax show interfaces

Black Box Console Server user guide

187

show line

user levels: This command can be used to display the configuration of a single line or all lines,admin, of thefront-mountedserial RJ45 ports only. Admin users can show all lines, normalnormal users can only display the configuration of their own line. The command doesnot show :

the Admin Port line configuration; this is fixed. For a single line the display will look similar to this:

Black Box Console Server user guide

188

If you specify all lines, the display will look similar to this:

Note that the user shown in the right-handcolumn is the ‘current user’ i.e. the user currently logged in on that line. ‘Nouser’ means there is not a user currently logged in.'In use' means the line is in use but line security is off so no the user can be identified

The security status for an individual line can be determined from the show line display. "Security=on" indicates that security is enabled for the particular line and "Security=off" indicates security is disabled for the line.

Syntax show line line_number

Where line_number is :

.

the current line.

n

a specific line number.

*all lines

Menu Line Configuration - Line Settingsequivalent

Black Box Console Server user guide

189

See also

set line, show user

Black Box Console Server user guide

190