Black & Decker SB3040, SB3000, SB3020 User Manual

0 (0)

Stick Blender

First Use Safety Recommendation

Please read through this booklet for safe and efficient use of the appliance. We urge you to read the "Hint's" section and also follow all detailed instructions even if you are familiar with using this appliance.

Keep this guide handy for future reference.

English

Page 02

Farsi

Page 14

Arabic

Page 21

SB3000/SB3020

/SB3040

English

IMPORTANT SAFEGUARDS

While using electrical appliances, in order to reduce the risk of fire, electric shock, and/or injury to persons, basic safety precautions should be followed, including the following:

Read all instructions carefully, even if you are familiar with the appliance.

To protect against the risk of electric shock, DO NOT IMMERSE the appliance, cord set or plug in water or other liquids.

To clean, wipe the exterior with a damp cloth.

Close supervision is necessary when any appliance is used near children. Never leave an appliance unattended when in use.

If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

Switch off and remove the plug from the power outlet when not in use before assembling or disassembling parts, cleaning or carrying out any maintenance of the appliance. Never pull the cord while unplugging out from power outlet.

Do not operate the appliance if its damage in any manner. Return the complete appliance to your nearest authorized service facility for examination, electrical repair, mechanical repair or adjustments to avoid any hazard.

The use of attachments or accessories not recommended or sold by this appliance manufacturer may result in fire, electric shock or personal injury.

Do not let the cord hang over the edge of a table, counter, or touch hot surfaces.

Avoid touching hot surfaces, use handles and knobs.

Do not operate or place any part of this appliance on or near any hot surfaces (such as gas or electric burner or in a heated oven).

Do not abuse the cord. Never carry the appliance by the cord or yank it to disconnect it from the outlet; instead, grasp the plug and pull to disconnect.

When using an extension cord with your appliance, make sure the extension cord is correctly wired, and rated for its use.

This product is intended for household use only.

Do not attempt to repair the appliance yourself; instead, take it to your Black & Decker-owned or Authorized Service Centre for repair.

SAVE THESE INSTRUCTIONS

-2-

English

SB3000

SB3040

SB3040

 

 

13

3

4

5

6

6

1

2

7

5

4

3

8

11

9

12

10

-3-

English

Intended use

Your Black & Decker stick blender has been designed for blending, mixing, beating, whipping, whisking and chopping food and beverage ingredients. Do not use this appliance for any other purpose. This product is intended for household use only.

Safety instructions

Warning! When using mains-powered appliances, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock, personal injury and material damage.

Read all of this manual carefully before using the appliance.

The intended use is described in this manual. The use of any accessory or attachment or the performance of any operation with this appliance other than those recommended in this instruction manual may present a risk of personal injury.

Retain this manual for future reference.

Using your appliance

Make sure that the appliance is switched off before connecting to or disconnecting from the power supply.

Always take care when using the appliance.

Do not use the appliance outdoors.

Always protect the motor unit from water or excessive humidity.

Do not operate the appliance if your hands are wet.

Do not operate the appliance if you are barefoot.

Do not touch moving parts. Keep long hair and loose clothing out of the way of the moving parts.

Guide the power supply cord neatly so it does not hang over the edge of a worktop and cannot be caught accidentally or tripped over.

Never pull the power supply cord to disconnect the plug from the socket. Keep the power supply cord away from heat, oil and sharp edges.

Switch off and wait for the motor to stop running before disconnecting the appliance from the power supply.

Never detach any part or accessory while the appliance is still connected to the power supply. Always disconnect the appliance from the power supply first.

If the power supply cord is damaged during use, disconnect the appliance from the power supply immediately. Do not touch the power supply cord before disconnecting from the power supply.

Disconnect the appliance from the power supply when not in use, before fitting or removing parts and before cleaning.

-4-

English

Misuse could cause an injury.

Keep loose clothing, hair, jewellery etc. away from moving parts.

Care is needed when handling cutting blades, especially when removing the blades and during cleaning.

Safety of others

Do not allow children or any person unfamiliar with these instructions to use the appliance.

Do not allow children or animals to come near the work area or to touch the appliance or power supply cord. Close supervision is necessary when the appliance is used near children.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children must be supervised to make sure that they do not play with the appliance.

After use

Switch off the appliance before cleaning, changing accessories or approaching parts which move in use.

Switch off and remove the plug from the socket before leaving the appliance unattended and before changing, cleaning or inspecting any parts of the appliance.

When not in use, the appliance should be stored in a dry place. Children should not have access to stored appliances.

Inspection and repairs

Before use, check the appliance for damaged or defective parts. Check for breakage of parts, damage to switches and any other conditions that may affect its operation.

Do not use the appliance if any part is damaged or defective.

Have any damaged or defective parts repaired or replaced by an authorised repair agent.

Before use, check the power supply cord for signs of damage, ageing and wear.

Do not use the appliance if the power supply cord or mains plug is damaged or defective.

If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard.

Never attempt to remove or replace any parts other than those specified in this manual.

Electrical safety

This tool is double insulated in accordance with EN 60335;

therefore no earth wire is required.

Always check that the power supply corresponds to the voltage on the rating plate.

To avoid the risk of electric shock, do not immerse the cord, plug or

motor unit in water or other liquid.

-5-

English

 

Use

Features

Blending

 

1Speed control switch

2Motor housing

3Plastic stem (SB3000 & SB3020)

4Stainless steel stem (SB3040)

5Whisk attachment (SB3040)

6All purpose cutting blade

7Jar

8Jar lid

9Chopper bowl (SB3020 & SB3040)

10Chopper blade (SB3020 & SB3040)

11Chopper lid (SB3020 & SB3040)

12Chopper bowl base

13Wall Bracket

Unpacking

Remove all packaging from the appliance.

Clean the appliance before first use.

Assembly

Warning! Before assembly, make sure that the appliance is switched off and unplugged.

Fitting and removing an attachment

Use the blending attachment (3 or 4) for blending liquids or mashing solids.

Use the whisk attachment (5) for mixing, beating, whipping and creaming liquids (SB3040 only).

Blending and whisk attachment

Place the ingredients into a measuring jug or a suitable container.

Using a stabbing motion, push the blade

(6) into the ingredients until the correct consistency is reached.

When blending liquids or fluid ingredients, use short pulses to prevent spillages.

Keeping the blade (6) submerged will help to prevent spilage. Take extra care when blending hot ingredients.

Chopping: SB3020 & SB3040 only

Place blade (10) in bowl (9), then add ingredients. Fit the lid (11) and rotate it in a an anti-clockwise direction to lock it in place. Insert the motor housing (2) into the lid an rotate in an anti-clockwise direction to align the 2 arrow marks and lock it in place.

Once chopping is completed, unplug the appliance & allow the blades to stop moving.

Rotate the motor housing (2) in a clock-wise direction to remove it.

Rotate the lid (11) in a clockwise direction and lift it from the bowl. The blade should be carefully removed & placed somewhere safe and the ingredients transferred to a suitable container.

The bowl base (12) can be used as a lid to provide temporary storage of ingredients.

Mixing

Fit the attachment to the motor housing

(2) and rotate it in an anti-clockwise direction until it locks in place.

To remove the attachment, rotate it in a clockwise direction and pull it from the motor housing (2).

Place the ingredients into a measuring jug or a suitable container.

Mix the ingredients until the correct consistency is reached.

Keeping the beater submerged will help to prevent spillages. Take extra care

-6- when mixing hot ingredients.

Black & Decker SB3040, SB3000, SB3020 User Manual
Loading...
+ 15 hidden pages