Black & Decker M24S, M22S User Manual

0 (0)
Black & Decker M24S, M22S User Manual

SAVE THIS USE AND CARE BOOK

Spatula Smart®

Mixers

M24S Shown

? 1-800-231-9786

QUESTIONS? Please call us TOLL FREE

MODEL M22S/M24S

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following:

Please read all instructions.

To protect against risk of electrical shock, do not put mixer, cord, or plug in water or other liquid.

Close supervision is necessary when any appliance is used by or near children.

Turn unit off and unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.

Avoid contacting moving parts. Keep hands, hair, clothing, as well as handheld spatulas and other utensils, away from beaters during operation to prevent injury and/or damage to the mixer.

Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or is dropped or damaged in any manner. Return the appliance to an authorized service facility for examination, repair, or adjustment.

The use of attachments not recommended or sold by the appliance manufacturer may cause fire, electric shock, or injury.

Do not use outdoors.

Do not let cord hang over edge of table or counter or touch hot surfaces.

Remove beaters and spatula attachment from mixer before washing.

Mixing flammable non-food substances may be hazardous.

Do not operate this appliance in the presence of explosive and/or flammable fumes.

This appliance is intended for household use only and not for commercial or industrial use.

2

Do not abuse the cord. Never carry the mixer by the cord or yank it to disconnect from an outlet; instead, grasp the plug firmly and pull to disconnect.

SAVE THESE INSTRUCTIONS

POLARIZED PLUG This appliance has a polarized plug—one blade is wider than the other. To reduce the risk of electric shock, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse it. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature by modifying the plug in any way.

Speed Control

Switch

Beater

Button

Beater Clips

Heel Rest

Spatula

Attachment

M24S Shown

3

How To Use

INSERTING AND

REMOVING BEATERS

1. Move the Speed Control to the Off position and unplug the cord from the outlet before inserting or removing the Beaters.

2. Insert the Beaters by gripping the Mixer handle with one hand and the Beater Stem with the other

Figure A hand. Insert the Beater Stem into one opening, rotating slightly until it locks into place. (Figure A) Repeat to attach the other Beater.

3. Remove the Beaters by gripping the Mixer handle and pressing the Beater Eject Button.

USING THE MIXER

1.Move the Speed Control Switch to the Off position and attach the Beaters. Then, plug the cord into a standard electrical outlet.

2.Place the ingredients in a bowl, grip the Mixer handle, and stand the Beaters in the center of the food to be mixed.

3.Start mixing at the lowest speed and gradually increase to the desired speed. (See “Mixing Guide” pages 6 & 7.)

4.Guide the Beaters continuously through the mixture for uniform mixing. To scrape the sides and bottom of

4

 

 

the bowl when using a hand-

 

 

held utensil, move the Speed

 

 

Control to the Off position

 

 

and place the Mixer on its

 

 

Heel Rest so the Beaters

 

 

can drain into the bowl.

 

 

(Figure B)

 

 

5. When mixing has been

 

 

completed, move the Speed

 

 

Control to the Off position,

 

 

unplug the cord, and eject

 

 

the Beaters.

Figure B

 

 

 

 

 

 

 

USING THE SPATULA ATTACHMENT

 

The Spatula Attachment can be used during some

 

mixing tasks to help scrape the bowl sides and blend

 

ingredients back into the batter. It is designed for use

 

when mixing thin (puddings, pancake mix) to medium

 

batters (cake mixes, muffins, frostings) and for mash-

 

ing potatoes. The use of the Spatula Attachment is

 

not recommended when beating egg whites, whip-

 

ping cream, or when mixing thick cookie dough.

 

1. Be sure the Mixer is unplugged from the electrical

 

outlet and the Speed Control Switch is in the Off posi-

 

tion. Insert the Beaters into the Mixer. (See page 4)

 

2. Place the Mixer on a flat surface with the Beaters

 

facing forward. The Spatula Attachment should be

 

positioned so the Spatula is to the right of the Beaters.

 

3. Weave the top of the Spatula Attachment under the

 

left Beater shaft and over the right Beater shaft. The

 

word “Front” on the Attachment should face

5

Loading...
+ 11 hidden pages