Black & Decker EC43B, EC42C, EC42, EC43 User Manual

0 (0)
Black & Decker EC43B, EC42C, EC42, EC43 User Manual

SAVE THIS USE AND CARE BOOK

Countertop

Can Opener

EC43 Shown

? 1-800-231-9786

QUESTIONS? Please call us TOLL FREE!

MODELS EC42, EC42C, EC43, EC43B

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following:

Please read all instructions.

To protect against risk of electrical shock, do not put can opener, cord, or plug in water or other liquid.

Close supervision is necessary when any appliance is used by or near children.

Turn unit off and unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.

Avoid contacting moving parts.

Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or is dropped or damaged in any manner. Return the appliance to an authorized service facility for examination, repair, or electrical or mechanical adjustment.

Keep the cord away from the Knife Sharpener (Models EC43 and EC43B only) and the path of the knife being sharpened to prevent fire or shock hazard.

The use of attachments not recommended or sold by the appliance manufacturer may cause fire, electric shock, or injury.

Do not use outdoors.

Do not let cord hang over edge of table or counter or touch hot surfaces.

Do not open pressurized (aerosol type) cans.

Do not open cans of flammable liquids such as lighter fluids.

Do not operate this appliance in the presence of explosive and/or flammable fumes.

This appliance is intended for household use only and not for commercial or industrial use.

SAVE THESE INSTRUCTIONS

POLARIZED

This appliance has a polarized plug—one

PLUG

blade is wider than the other. As a safety fea-

 

ture, this plug will fit into a polarized outlet

 

only one way. If the plug does not fit fully into

 

the outlet, reverse the plug.

 

If it still does not fit, contact a qualified elec-

 

trician. Do not attempt to defeat this safety

 

feature by modifying the plug in any way.

 

 

 

 

Pierce Lever

Magnet Assembly

 

 

 

 

 

 

 

 

 

Knife Sharpener

(Models EC43

EC43B Only)

Can

Opener

Body

Cord Storage Area

(In back)

3

Figure B
Figure A

How To Use

1. First, install the Magnet. Line up the vertical tab on the Magnet assembly with the vertical hole on the Pierce Lever, then push into the Pierce Lever, and turn until it locks into position. (Figure A)

2. Plug the cord into a standard,

120-volt electrical outlet.

3. Lift up the right side of the Pierce Lever. Tip the can on an angle so that the rim of the can is under the support post. Lower the Pierce Lever, making sure the Cutter Blade is inside the rim of the can.

(Figure B)

4. Press the Pierce Lever down completely. The can will automatically be pierced and the cutting action will begin. Because of the hands-free feature, it is not necessary to hold the Pierce Lever down or to hold onto the can during cutting. Keep in mind, however, that it may be necessary to hold or steady the Can Opener Body when cutting tall or heavy cans.

5.The Can Opener will automatically stop when the can is open.

6.If the Can Opener fails to cut the can lid completely, hold the Pierce Lever down until the can is open.

7.You may stop the cutting action any time by lifting the Pierce Lever.

8.To remove the can, hold it with one hand and raise the Pierce Lever with the other hand. Discard the cut lid.

4

Loading...
+ 8 hidden pages