Black & Decker BX260, BX210, BX180 User Manual

0 (0)
BX180 - Blender Only BX210 - Blender & Coffee Grinder BX260 -
Blender, Coffee Grinder & Cheese Grater
First Use Safety Recommendation
Please read through this booklet for safe and efficient use of the appliance. We urge you to read the "Hint's" section and also follow all detailed instructions even if you are familiar with using this appliance.
English Page 02
Arabic Page 13
BX180/BX210/BX260
English
2
3
Fig A
MAX - 1.4L
1
11
Fig B
5
12
9
Fig C
10
4
6
7
8
12
10
Fig D
0
P
1
2
7
4
-2-
English
Intended use
Your Black & Decker Blender has been designed for processing ingredients as described in this manual. With the attachments provided, it can also be used to grate and grind ingredients. Misuse could cause an injury.
This product is intended for household use only.
Safety instructions
Warning! When using mains-powered appliances, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock, personal injury and material damage.
Read all of this manual carefully before using the appliance.
• The intended use is described in this manual. The use of any accessory or attachment or the performance of any operation with this appliance other than those recommended in this instruction manual may present a risk of personal injury.
• Retain this manual for future reference.
Using your appliance
• Switch off and unplug the appliance before changing accessories or approaching parts which move when in use.
• Make sure that the appliance is switched off before connecting to or disconnecting from the power supply.
• Always take care when using the appliance
• Do not use the appliance outdoors.
• Do not operate the appliance if your hands are wet.
• Do not operate the appliance if you are barefoot.
• Do not touch moving parts. Keep long hair and loose clothing out of the way of the moving parts.
• Guide the power supply cord neatly so it does not hang over the edge of a worktop and cannot be caught accidentally or tripped over.
• Never pull the power supply cord to disconnect the plug from the socket. Keep the power supply cord away from heat, oil and sharp edges.
• Switch off and wait for the motor to stop running before disconnecting the appliance from the power supply.
• Never detach any part or accessory while the appliance is still connected to the power supply. Always disconnect the appliance from the power supply first.
• If the power supply cord is damaged during use, disconnect the appliance from the power supply immediately. Do not touch the power supply cord before disconnecting from the power supply.
• Disconnect the appliance from the power supply when not in use, before fitting or removing parts and before cleaning.
• Always disconnect the appliance from the power supply if it is left unattended.
• Do not try to disassemble or repair this appliance. Always return it to the manufacturer, its Service Agent or similarly qualified persons in order to avoid a hazard.
Safety of others
• Do not allow children or any person unfamiliar with these instructions to use the appliance.
• Do not allow children or animals to come near the work area or to touch the appliance or power supply cord.
• Close supervision is necessary when the appliance is used near children.
-3-
English
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been give supervision or instruction concerning use of the appliance by a person responsible for their safety
• Children must be supervised to make sure that they do not play with the appliance.
• This unit must be attended in use
• Do not allow children to use the blender without supervision.
Before first use
• Before using the appliance for the first time ensure all packaging is removed.
• Clean all parts before use.
After use
• Switch off and remove the plug from the socket before leaving the appliance unattended and before changing, cleaning or inspecting any parts of the appliance.
• When not in use, the appliance should be stored in a dry place. Children should not have access to stored appliances.
Inspection and repairs
• Before use, check the appliance for damaged or defective parts. Check for breakage of parts, damage to switches and any other conditions that may affect its operation.
• Do not use the appliance if any part is damaged or defective.
• Have any damaged or defective parts repaired or replaced by an authorised repair agent.
• Before use, check the power supply cord for signs of damage, ageing and wear.
• Do not use the appliance if the power supply cord or mains plug is damaged or defective.
• If the power-supply cord or mains plug is damaged or defective it must be repaired by an authorised repair agent in order to avoid a hazard. Do not cut the power supply cord and do not attempt to repair it yourself.
• Never attempt to remove or replace any parts other than those specified in this manual.
Warning symbols
The following symbols are used in this manual:
Do not immerse the appliance, cord set or plug in liquids
Denotes risk of personal injury or
damage to the product in case of non-observance of the instructions in this manual.
Denotes risk of electric shock.
Electrical safety
This appliance is double insulated in
accordance with EN 60335; therefore no earth wire is required.
Always check that the power supply corresponds to the voltage on the rating
To avoid the risk of electric shock,
do not immerse the cord, plug or motor unit in water or other liquid.
Parts Identification (Fig A)
1 Filler cap 7 Control dial
2 Lid 8 Foot
3 Jar 9 Grater
4 Blade assembly 10 Grinder
5 Seal 11 Grater lid
6 Motor housing 12 Grinder lid
-4-
English
The following symbols are used on unit:
P Pulse operation
0 Power off
1 Low speed
2 High speed
Assembly
Warning! Make sure that the appliance is switched off and unplugged.
Blender
Assemble the jar (3) by first placing the seal (5) on the blade assembly (4).
Position the blade assembly in the underside of the jar (3). Rotate the assembly in an anti-clockwise direction until tight.
Warning! Do not over-tighten.
Place the assembled jar on the motor housing (6) and rotate it in a clockwise direction until it locks in position.
To unlock rotate it in anti-clockwise direction.
Note: Take care when emptying the jar and when handling the blades, as they are sharp.
Mills
Put the ingredients into the mill (9 or 10). Fit the lid (11 or 12) over the mill and rotate it in an anti-clockwise direction until it locks in place.
Place the assembled mill on the motor housing (6) and rotate it in a clockwise direction until it locks in position.
To unlock rotate it in anti-clockwise direction.
Use
Switching on and off
Rotate the control dial (7) to select the required speed.
Pulse (P) can also be used to give greater control.
Once blending is completed, the Blender can be turned off, by returning the switch to the off (0) position.
Blending
Place the appliance on a clean, flat work surface.
Add the ingredients to the jar then fit the lid (2) and filler cap (1).
Note: Do not exceed the maximum capacity of 1.4 litres.
Connect the appliance to a suitable electrical supply. Rotate the control dial (7) to the required speed.
When blending is complete return the switch to the off (0) position.
Once the blades have come to a complete stop, rotate the jar (3) in an anti-clockwise direction and lift it from the motor housing (7). Remove the lid (2). Pour the ingredients into a suitable container.
Note: Ingredients can be added by inserting them through the hole left when the filler cap (1) is removed.
Warning! Never operate the Blender without the lid (2) fitted.
Note: Do not operate the blender for longer than 2 minutes. After each 2 minute session the blender must be allowed to cool down for at least 10 minutes.
Note: The motor is equipped with an auto resetting thermostat. This may operate and stop blending if the appliance is over-loaded. If this should happen, disconnect the unit from the electrical supply, remove some of the contents of the jar and allow the blender to cool down. The thermostat will take a few minutes to reset.
-5-
Loading...
+ 10 hidden pages