B&K AVR 707-705 User Manual
Size:
15.77 Mb
Download

14472 102808

ii

 

 

 

 

 

 

 

 

QUICK START GUIDE - AVR 707 & AVR 705

 

 

 

 

© 2008 B&K Components Ltd. All rights reserved.

 

 

 

 

The information in this manual is copyright protected. No part of this manual may be copied or reproduced in any form

 

without prior written consent from B&K

Components, Ltd.

 

 

 

 

B& K Components Ltd. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL

 

ERRORS/OMISSIONS MADE IN THIS MANUAL. The information in this manual may be subject to change

 

without prior notice.

 

Accessories Included

 

 

 

 

 

 

 

 

 

 

 

1 - SR10.1 Remote Control

1 - Information CD

 

 

 

 

 

B&K

 

 

1 - AM Antenna

 

1 - Warranty Card

 

 

 

1 - FM Dipole Antenna

 

1 - Serial to RJ-45Adapter

 

 

 

1 - Power Cord

 

 

 

 

 

 

1 - S-Videoto RCA Adapter

 

 

SIMPLYBETTER!

 

 

 

 

Limited Warranty

 

 

 

 

B&K Components Ltd., referred to herein as B&K , warrants your B&K equipment (excluding remote control) against all defects in material and work-

 

manship for a period of five years from the date of purchase. The remote control is under warranty for a period of one year. This warranty applies only

 

to the original purchaser and only to equipment in normal residential use and service. Defective equipment must be returned to B&K , prepaid, accom-

 

panied by proof of purchase and sufficient payment to cover the cost of return shipping and handling, and will be repaired or replaced at the discretion

 

of B&K whose decision as to the method of reparation will be final.

 

 

 

 

This warranty shall not apply to any equipment which is found to have been improperly installed, incorrectly fused, misused, abused, or subjected to

 

harmful elements, used in any way not in accordance with instructions supplied with the unit, or to have been modified, repaired or altered in any way

 

without the expressed, written consent of B&K . This warranty does not apply to the cabinet or appearance items such as the faceplate or control but-

 

tons, nor does it cover any expenses incurred in shipping the unit to and from the manufacturer's service department.

 

This warranty on B&K Components, Ltd. products is NOT VALID if the products have been purchased from an unauthorized dealer or an E-taileror if

 

the original factory serial number has been removed, defaced or replaced in any way. B&K Components, Ltd. sells its products through authorized deal-

 

ers in order to insure that consumers obtain proper dealer service and support. Buying from an authorized B&K Components, Ltd. dealer insures that

 

you have a FACTORY WARRANTY on your B&K

Components, Ltd. product. If you have any questions concerning your Factory Warranty call

 

B&K Components, Ltd. at 716-656-0026.

 

 

 

 

 

Upgradability: B&K

is one the first manufacturers in the audio/video industry to consistently offer software and hardware upgrades to its processing of

 

audio signals. Through upgrades B&K

delivers exceptional value to its customers. But what is "Upgradability"? Upgradability is not a guarantee; we

 

define it as a philosophy of designing and manufacturing products so that as audio technology evolves, B&K

can provide enhancements and improve-

 

ments to its products that are economically viable.

 

 

 

 

THE EXPRESS FACTORY WARRANTY HEREIN CONTAINED IS IN LIEU OF ANY AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED,

 

INCLUDING ANY WARRANTY OF MERCHANTABILITY, UPGRADABILITY OR OF FITNESS FOR ANY PARTICULAR PURPOSE. B&K COMPO-

 

NENTS, LTD. SHALL NOT UNDER ANY CIRCUMSTANCES BE LIABLE FOR DAMAGES, INCLUDING SPECIAL, INCIDENTAL, EXEMPLARY, PUNI-

 

TIVE OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE PURCHASE, USE OR PERFORMANCE OF ANY B&K

 

PRODUCT.

 

 

 

 

 

 

 

This warranty gives you specific legal rights. Your may also have other rights which vary from State to State. Some States do not allow the exclusion or

 

limitation of incidental or consequential damages and the foregoing exclusions may not apply to you.

 

 

 

 

No agent, representative, dealer or employee of B&K has the authority to increase or alter the obligations or terms of this warranty.

 

 

 

 

Returning Equipment

 

 

 

 

No equipment may be returned to B&K

Components Ltd. without a RETURN AUTHORIZATION (RA). Should you find it necessary to return equipment

 

to B&K , for any reason, a RETURN AUTHORIZATION (RA) number must be issued by B&K in respect of the equipment being returned. You may

 

request an RA number by calling B&K

at the numbers below. We will need the following information to issue your RA number. Please have it ready

 

before you call.

 

 

 

 

 

 

 

1.

Your name, address, and phone number.

 

 

 

 

2.

The model and serial number of the equipment being returned.

 

 

 

 

3.

A description of the problem being experienced.

 

 

 

 

4.

Your sales receipt.

 

 

 

 

 

 

Your call will be referred to a Technical Service Representative who will work with you to resolve the problem. If it is determined that the unit must be

 

returned for repair, an RA number will be issued.

 

 

 

 

 

SIMPLY BETTER! is a copyright of B&K

Components, Ltd. All other brand or product names are trademarks or registered trademarks of their respec-

 

tive companies or organizations.

 

 

 

 

 

2100 Old Union Road Buffalo, NY 14227 1-800-543-5252

In NY: 716-656-0026fax:716-656-1291

e-mail:info@bkcomp.com Web Site:

www.bkcomp.com

Table of Contents

1

FRONT AND REAR PANEL ...............................................................................................

2

CONNECTION OVERVIEW ...............................................................................................

4

VIDEO INPUT / OUTPUT CONNECTIONS .......................................................................

5

Video Input Connection - HDMI...............................................................................

5

Video Input Connection - Component Video ...........................................................

5

Video Input Connection - S-Video ...........................................................................

5

Video Input Connection - Composite Video.............................................................

5

Video Output and Scaling ........................................................................................

5

AUDIO INPUT CONNECTIONS .........................................................................................

6

Audio Input Connection - HDMI...............................................................................

6

Audio Input Connection - Optical Digital..................................................................

6

Audio Input Connection - Coax Digital.....................................................................

6

Audio Input Connection - Stereo Analog..................................................................

6

Audio Input Connection - Multi-channelAnalog 5.1 or 7.1 ......................................

6

AUDIO OUTPUT CONNECTIONS .....................................................................................

7

Audio Output Connection.........................................................................................

7

Audio Output Connection - Speakers ......................................................................

7

CONFIGURATION AND CONTROL...................................................................................

8

GUI On-ScreenOverlay Interface............................................................................

8

Ethernet Communication .........................................................................................

8

RS-232Communication...........................................................................................

8

SAFETY PRECAUTIONS...................................................................................................

9

SPECIFICATIONS..............................................................................................................

10

Product Information

 

Date of Purchase:

 

Model #:

 

Serial #:

 

Purchased From:

 

Address:

 

Phone #:

 

Front panel buttons serve the following functions:
Sleep - Toggles the unit in and out of standby mode (ON or OFF). Mute - Toggles the unit in and out of a mute state (ON or OFF). Menu - Enters into and out of the on-screen menu system.
Save - Save the selected setting such as a Preference or Menu option. Enter - Selection button for the desired preference.
Arrows - Navigate through the menu.

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FRONT AND REAR PANEL

 

 

 

 

1

2

 

 

 

 

3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

 

6

 

9 10

11

12

 

5

 

13

4

 

15

 

8

 

 

 

 

 

 

 

 

 

 

 

 

14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

21

20

19

18

17

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

24

 

23

 

22

16

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

Left Hand Knob - The left selector knob is a rotary encoder with the primary purpose of A/V input source selection. The knob serves

 

 

multiple functions. Pushing in on the the knob will scroll through the options to control or select Input Source, AM/FM Tuning, AM/FM

 

 

Station, Audio Preference or Video Preference. Rotating the knob will change the highlighted function.

 

 

 

 

2

Display - The receiver contains a 16 character by 2 row display. It will display current status of the receiver and any changes being

 

 

performed.

 

 

 

 

 

 

 

 

 

 

3

Right Hand Knob - The right selector knob is a rotary encoder with the primary purpose of audio volume adjustment. The knob

 

 

serves multiple functions. Pushing in on the the knob will scroll through the options to control Master Volume, Bass, Treble, Center

 

 

Volume or Subwoofer Volume. Rotating the knob allows changing of the highlighted function.

 

 

 

 

4

Main power switch - Removes all power to the receiver. Normal operation of the receiver requires the power switch to remain on.

 

 

Use the SLEEP button for daily on and off of the receiver. SLEEP places the unit in standby mode, which

allows

turning

 

 

back on with the remote control. Turn the receiver off using the Main Power switch when the receiver is not used for extended peri-

 

 

ods of time.

 

 

 

 

 

 

 

 

 

 

5

Front panel buttons -

 

 

 

 

 

 

 

 

 

3

FRONT AND REAR PANEL

6Headphone Jack - Headphones having a standard 1/4” stereo plug may be connected to the headphone output.

7Control Output - 1/8” MonoMini-jack(Tip+ Ring-)source of 12VDC 100mA output for controlling external devices, such as amplifiers and projection screens. A remote control CTRL+ "Control On" command will turn on 12VDC and“CTRL-”will turn off 12VDC. Additional control and control is available usingRS-232and EthernetBKC-DIP.

Amp Enable - 1/8” MonoMini-jack(Tip+ Ring-)source of 12VDC 100mA for use with automatically controlling an external device while not in standby.

8Restore - Sometimes it is advisable to restore the unit to a factory default state in order to clear problematic system operation. A factory restore will clear all system settings, Audio and Video Preferences and Serial Macros. Restore may be selected by simultaneously pressing the front panel Sleep, Up and Right.Encoder Knob [Master Volume].alternately, pushing in the rear panel button for 5 seconds will restore all settings to factory default

9USB 2.0 - USB 2.0 connection for use of configuring and controlling the receiver.Feature is not enabled at this time. Please see www.bkcomp.com for updates, when available.

10RS-232 Control Port - RS-232RJ-45input/output for computer interface andRS-232serial controller applications.

Ethernet Control Port - EthernetRJ-45input for flashing the software in the receiver. Also used for computer interface and Ethernet control applications.

11FM/AM Tuner - Respective connections for attaching the included AM and FM tuner antennas for internal tuner reception.

12Coax Digital Audio Inputs - A total of 8 coax digital audio inputs for connecting coax digital audio signals from the source to the receiver.

Coax Digital Audio Output - A single coax digital audio output for use with another audio device. The audio output is currently sourced from the selected audio input..

13RCA Surround Outputs - 7.1 Surround outputs for driving external power amplifiers or powered speakers.

14RCA Analog Audio Inputs - A total of 8 stereo analog RCA inputs for use as standard input pairs. OptionalMulti-Channelanalog support for use with inputs5-7(5.1),5-8(7.1). Configuration may be set and viewed using the menu or BKcSuite.

RCA Analog Record Output - A stereo pair of analog RCA outputs for use with an analog recording device.

15Digital Optical Audio Inputs - A total of 8 optical digital audio inputs for connecting optical digital audio signals from the source to the receiver.

Digital Optical Audio Output - A single optical digital audio output for use with another audio device. The audio output is currently sourced from the selected audio input.

16Component Video Inputs - A total of 8 component video inputs for standard and high definition video signals. Composite video directly connects to the red RCA.S-Videois Y - green RCA, C - blue RCA using suppliedS-VIDEOto RCA adapter.

Component Video Outputs - Scaled video output may be set to 720p, 1080i - default set to 1080i.

17AVR 705 Speaker Outputs - 5-Waybinding posts supply power to the Front, Surround and Center channel speakers.

18AVR 707 Speaker Outputs - 5-Waybinding posts supply power to the Front, Surround, Center and Back channel speakers.

19IR Flashers, All IR Output and IR In - 1/8"Mini-Jack(Tip + Ring-)connections for IR routing. Flasher outputs allow routing of up to 14 source components. All IR Output will direct all IR information being received by the unit from the Keypad input, front panel or the 1/8"Mini-JackIR input. IR Input allows an IR signal to be sent into the unit in order to control the receiver or for routed passthru control of a connected source component.

20Keypad Connection and IR Daisy Chaining - RJ-45Keypad Connection provides a 12VDC power, common ground,RS-232transmit, IR Data IN, and 12V control output trigger. The receiver will support up to 5daisy-chainedB&K keypads. The IR Chain connection allows linking the receiver to a CT product for fulltwo-waycommunication.

21Three-position Phoenix Adapter - Phoenix connection for using a Page / Event system with the receiver.Feature is not enabled at this time. Please see www.bkcomp.com for updates, when available.

22HDMI Inputs/Output - 6 input and 1 output High Definition Multimedia Interface (HDMI) connections. Connections carry both the digital audio and digital video signal simultaneously with output resolutions of 720p, 1080i or 1080p - default set to 1080i.

23AC Input Receptacle - For attaching the supplied AC power cord to the unit.

24AC Fuse Holder - Holds the AC line fuse. Replace only with same type and value 12A fast blow. Note: The voltage rating label is located on the AC fuse holder cover plate.

4 CONNECTION OVERVIEW

The following is an overview of connections found on the AVR 707. Further information may be found later in the quick guide or in the AVR 707 manual. This guide should only be used as a

reference starting point, it is recommended you contact an authorized B&K installer or dealer for integration of the receiver in advanced installations.