3575
Safety Instructions
Product View
Assembly
Operations / Special Tools
CleanView
®
BAGLESS
USER’S GUIDE
3575/3593/6590/8975 SERIES
3
4
4-5
6-8
Maintenance
8-11
Troubleshooting
12
Warranty
14
Consumer Services
13
Replacement Parts
13
Reorder Form
15
2
Thanks for buying a BISSELL CleanView
®
We’re glad you purchased a BISSELL CleanView Vacuum. Everything
we know about floor care went into the design and construction of this
powerful, high-tech home vacuuming system.
Your BISSELL CleanView is well made, and we back it with a
limited comprehensive one-year warranty. We also stand behind it with a
knowledgeable, dedicated Consumer Services department, so, should you
ever have a problem, you’ll receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today,
BISSELL is a global leader in the design, manufacture, and service of high
quality homecare products like your BISSELL CleanView.
Thanks again, from all of us at BISSELL.
Mark J. Bissell
President and Chief Executive Officer
3
IMPORTANT SAFETY INSTRUCTIONS
■
Keep hair, loose clothing, fingers, and all
parts of body away from openings and
moving parts.
■
Turn off all controls before plugging or
unplugging vacuum cleaner.
■
Use extra care when cleaning stairs.
■
Do not pick up flammable materials (lighter
fluid, gasoline, kerosene, etc.) or use in the
presence of explosive liquids or vapors.
■
Do not pick up toxic material (chlorine
bleach, ammonia, drain cleaner, etc.).
■
Do not use vacuum cleaner in an enclosed
space filled with vapors given off by oil
base paint, paint thinner, some moth
proofing substances, flammable dust, or
other explosive or toxic vapors.
■
Do not pick up hard or sharp objects such
as glass, nails, screws, coins, etc.
■
Do not pick up anything that is burning
or smoking, such as cigarettes, matches, or
hot ashes.
■
Do not use without filters in place.
■
Use only on dry, indoor surfaces.
■
Keep appliance on a level surface.
■
Do not carry the vacuum cleaner while it
is running.
WARNING: The Power Cord on this product
contains lead, a chemical known to the State
of California to cause birth defects or other
reproductive harm. WASH HANDS AFTER
HANDLING.
SAVE THESE INSTRUCTIONS
FOR FUTURE USE.
When using an electrical appliance,
basic precautions should be observed,
including the following:
READ ALL INSTRUCTIONS
BEFORE USING YOUR
UPRIGHT VACUUM.
Always connect to a polarized outlet (left slot is
wider than right). Unplug from outlet when not
in use and before conducting maintenance.
WARNING: To reduce the risk of
fire, electric shock, or injury:
■
Do not modify the polarized plug to fit a
non-polarized outlet or extension cord.
■
Do not leave vacuum cleaner unattended
when it is plugged in.
■
Unplug from outlet when not in use and
before servicing.
■
Do not use outdoors or on wet surfaces.
■
Do not allow children to operate vacuum
cleaner or use as a toy.
■
Close attention is necessary when used by
or near children.
■
Do not use for any purpose other than
described in this User’s Guide.
■
Use only manufacturer’s recommended
attachments.
■
Do not use with damaged cord or plug.
■
If appliance is not working as it should,
has been dropped, damaged, left outdoors,
or dropped into water, have it repaired at
an authorized service center.
■
Do not pull or carry by cord, use cord as a
handle, close a door on cord, or pull cord
around sharp edges or corners. Do not run
appliance over cord. Keep cord away from
heated surfaces.
■
Do not unplug by pulling on cord. To
unplug, grasp the plug, not the cord.
■
Do not handle vacuum cleaner or plug with
wet hands.
■
Do not put any object into openings. Do
not use with any opening blocked; keep
openings free of dust, lint, hair, and
anything that may reduce air flow.
THIS APPLIANCE HAS A
POLARIZED PLUG.
To reduce the risk of electric shock, this
appliance has a polarized plug (one blade is wider
than the other). This plug will fit in a polarized
outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install a proper
outlet. Do not change the plug in any way.
This model is for household use only.
4
CAUTION:
Do not plug in your vacuum
cleaner until you are familiar
with all instructions and
operating procedures.
Power
Switch
Carrying
Handle
Crevice Tool
Post-Motor
Filter
Quick Reach
Handle
Handle
Quick Release
Cord Wrap
Handle
Release
Pedal
Powerfoot
Stretch Hose
Extension Wand
Power Cord
Furniture
Protection
Guard
Height
Adjustment
Knob
Upper Tank
Dirt Container
Pre-Motor Filter
Lock ’n
Seal
™
Lever
Headlight
Dusting
Brush
Hose Wand
Upper Tank Knob
Hose Clip
Power Trak
™
Furniture
Protection Guard
CleanView
Window
Optional Hepa
Media Filter (Select
Models Only)
Power Trak
™
Models
Hose
Wand Base
Louvers
Upper Tank
Frame and Filter
(Inside Louvers)
5
This User’s Guide has been designed to help you get the
most satisfaction from your BISSELL CleanView. You’ll find
assembly and operating instructions, safety precautions, as well
as maintenance and troubleshooting instructions. Please read
this Guide thoroughly before assembling your vacuum cleaner.
Pay particular attention to the product diagram, assembly
instructions, and part names. Locate and organize all parts
before assembly. Familiarize yourself with the parts and where
they fit. Following this User’s Guide will greatly enhance your
ability to get the most performance from your BISSELL
CleanView for many years.
The only tool you’ll need to assemble your vacuum
cleaner is a screwdriver.
Locate the vacuum Handle and remove the screw packet
taped to the base of the Handle.
Stand the vacuum upright and slide the base of the Handle
firmly into the grooves at the top of the vacuum body.
Check to be sure the Handle is fitted to the vacuum
body. If there is a gap in front, continue to push firmly
until the Handle is flush.
Insert one screw provided from the screw packet into the
existing hole. Tighten securely with a screwdriver.
Position the Hose Assembly on the back of the vacuum
as shown.
Attach the Hose with the remaining two screws from
the packet. Tighten securely with a screwdriver.
Grasping the Quick Reach Handle, slide the end of the
Hose Wand onto the Hose Wand Base. Snap the Hose
into the Hose Clip.
NOTE: The Powerfoot will not operate effectively
unless the Hose Wand is firmly attached.
How To Use This Guide
How To Put It Together
WARNING:
Plastic film can be dangerous.
To avoid danger of suffocation,
keep away from babies
and children.
Attach Handle To Vacuum
1.
2.
3.
4.
Attach Vacuum Hose and Tools
1.
2.
3.
Loading...